Machine Vision Systems

0.00 kr

Sold Out

Specifications

Model		LS-9006D
Type		Head: 2-axis small-diameter model
Measurement range		ø0.04 mm to ø6 mm ø0.001" to ø0.24"
Smallest detectable object		0.04 mm 0.001"
Repeatability		±0.03 µm^*1
Measurement accuracy		±0.5 µm 0.000020"^*2
Sampling cycle		16,000 samples/sec.^*3
Light source		InGaN green LED
Monitor camera		Not provided
Environmental resistance	Enclosure rating	IP67 (including connector part)
	Ambient light	Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	15 G/6 ms
Material		Aluminum
Weight		Approx. 4.8 kg
^1 A ±2σ margin of error when measuring a ø1.0 mm ø0.04" rod in the center of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. ^2 Margin of error when a moving ø1.0 mm ø0.04" rod is measured in the 2 mm x 2 mm 0.08" x 0.08" measurement area. ^*3 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function.

Keyence OP-88620 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88620
Length				10 m 32.8'

Keyence OP-88323 Keyence

0.00 kr

Sold Out

Buy the Keyence OP-88323 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence OP-88323 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence SZ-VP10PW Keyence

5,002.00 kr

Only 1 unit left

Specifications

Model				SZ-VP10PW
Type				Power Cable When Using PROFIsafe
Length				10 m 32.81'
Weight				Approx. 650 g

Keyence GL-VM08LN Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM08LN
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			8
Total length			320 mm 12.60"
Detection height			280 mm 11.02"
Protection height			365 mm 14.37"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.1
		OFF→ON	45.7 ^*3
		All blocked→ON	51.2 ^*4
	With channel A or B	ON→OFF	10.3
		OFF→ON	57.1 ^*3
		All blocked→ON	70.8 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	66 ^*5
		Receiver	79 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	49 ^*5
		Receiver	56 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		220 g 7.76 oz
	Receiver
	Total		440 g 15.53 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence TM-X5006 Keyence

0.00 kr

Sold Out

Specifications

Model			TM-X5006
Transmitter/receiver distance			60 mm 2.36"
Measuring range	Field of view	High-accuracy measurement area	ø4 mm ø0.16"
		Measurement area	ø6 mm ø0.24"
	Depth of field	High-accuracy measurement area	2 mm 0.08"
		Measurement area	4 mm 0.16"
Exposure time			25/50/100 μs (Adjustable 3-stage)
Imaging time (Trigger interval)			Approx. 24 ms (at “Full” vertical/horizontal measurement range sizes) Approx. 3 ms (at “4/16” vertical/horizontal measurement range sizes)
Light source			InGaN green LED
Measurement position accuracy	High-accuracy measurement area		±0.2 μm ±0.000008" ^*1
	Measurement area		±0.3 μm ±0.000012" ^*1
Repeatability			±0.03 μm ±0.000001" ^*2
Pixel resolution			Approx. 3.5 μm 0.000138"
Environmental resistance	Enclosure rating		IP64 ^*3
	Ambient temperature		0 to +45°C 32 to 113°F
	Relative humidity		85% RH or less (No condensation)
Material			Aluminum
Weight			Transmitter: Approx. 160 g 5.65 oz Receiver: Approx. 480 g 16.94 oz Base: Approx. 210 g 7.41 oz
^1 Error when measuring width of KEYENCE standard object (glass calibration scale). ^2 Average value of ±2σ measuring the width of a KEYENCE standard object (glass calibration scale) 16 times in the center of the measurement area. ^*3 Excluding connectors and cable boxes.

Keyence OP-88769 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FR-SA0 Keyence

0.00 kr

Sold Out

Specifications

Model		FR-SA0
Type		Short Separated Amplifier Unit Zero line Expansion unit
Response time		0.4 s, 1.5 s, 4 s (default value), 10 s
Output	No. of control outputs	0
	Control output/auxiliary output	─
	Analog output
External input
External communication		NU Series compatibility
Analog output accuracy	Resolution	─
	Zero accuracy
	Full-scale accuracy
Expansion		With NU series connected:up to 16 units^*1 (17 units total including main unit)
Power supply	Power voltage	24 VDC +25%/−20%^2^3 including ripple, Class2 or LPS
	Power consumption	1620 mW max. (53 mA max. at 24 V)
Environmental resistance	Ambient temperature	–20°C to +55°C -4°F to +131°F (no freezing)^*4
	Relative humidity	Up to 85% RH (no condensation)
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent protection, and output surges
Material		PC
Weight		Approx. 20 g 0.71 oz
^1 When expanding the system by 13 or more units with the FR-SH01 connected, contact your nearest KEYENCE office. ^2 When expanding the system by one or more FR-SA2 units with the FR-S01 connected or by eight or more FR-SA2 units with the FR-SH01 connected, use a power voltage of 21.6 V or higher. ^3 When expanding the system by four or more FR-SA0 units with the FR-S01 connected or by ten or more FR-SA0 units with the FR-SH01 connected, use a power voltage of 21.6 V or higher. ^4 When expanding the system by 1 expansion unit, ensure the ambient temperature is 50°C 122°F or less. When expanding the system by 2 or more expansion units, ensure the ambient temperature is 45°C 113°F or less.

Keyence SJ-M020 Keyence

13,936.00 kr

Only 7 units left

Specifications

Model		SJ-M020
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Static elimination time		0.5 sec. max.^*1
Ion balance		±15 V^*2
Supply pressure range		0.001 to 0.5 MPa^*3
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open-collector, 100 mA max. (40 V max.)
	Ion level alarm output
	Condition alarm output
Rating	Power voltage	24 VDC ±10%
	Current consumption	450 mA max.
Environmental resistance	Ambient temperature	0 to +80°C 32 to +176°F^4^5
	Relative humidity	35 to 65%RH (no condensation)^*3
Weight		Approx. 600 g
^1 Operating distance: 50 mm 1.97", Air volume: 60 NL/min, (Ambient temperature: 20 to 30°C 68 to 86°F, Ambient humidity: 40 to 60%RH) ^2 Operating distance: 50 mm 1.97", Air volume: 20 NL/min, (Ambient temperature: 20 to 30°C 68 to 86°F, Ambient humidity: 40 to 60%RH) ^3 For derating of humidity and pressure during use at an ambient temperature higher than 35°C 95°F, contact KEYENCE. For air supply, use clean dry air with -20°C -4°F or lower dew point. The minimum air volume varies depending on the nozzle type. Contact KEYENCE for more information. ^4 The supplied air temperature should be 40°C 104°F or less. ^*5 For high-pressure cable only. For other parts, operating ambient temperature is 0 to +40°C 32 to +104°F.

Keyence NQ-EP4A Keyence

9,774.00 kr

Only 5 units left

Specifications

Model		NQ-EP4A
Network Specifications	Compatible Networks	EtherNet/IP™, Modbus/TCP
	Communication Speed	10 Mbps/100 Mbps
	Connector	M8 4-pin female A-code
Power Supply Specifications	Connector Type	Power supply port IN: M8 4-pin male A-code Power supply port OUT: M8 4-pin female A-code
	Power Voltage	18 to 30 VDC
	Allowable Current	V1 and V2: max. 4 A each V1 and V2: 5.5 A in total
	Current Consumption	Max. 240 mA
Input Specifications	Connector Type	M12 5-pin female A-code
	Number of Inputs	4
	Input Types	Voltage/current/resistance thermometer (RTD)/thermocouple
	Resolution	16 bit
	V1 Power Supply Capacity	Ports 1 to 4: 1 A in total, with short-circuit protection
Voltage Input Specifications	Input Range	Differential/single end 0 to 10 V/±10 V/2 to 10 V/0 to 5 V/1 to 5 V/±1 V/±500 mV/±100 mV/±50 mV
	Input Filters	4 stages
	Absolute Maximum Input	11.85 V
	Input Resistance	100 kΩ or above
	Conversion Speed	4 ms or less
	Conversion Precision (at 25°C 77°F)	0.1% of F.S. or lower
	Conversion Precision (at -40 to +70°C -40°F to +158°F)	0.75% of F.S. or lower
Current Input Specifications	Input Range	Differential/single end 0 to 20 mA/4 to 20 mA/±20 mA
	Input Filters	4 stages
	Absolute Maximum Input	23 mA
	Input Resistance	50 Ω or lower
	Conversion Speed	4 ms or less
	Conversion Precision (at 25°C 77°F)	0.1% of F.S. or lower
	Conversion Precision (at -40 to +70°C -40°F to +158°F)	0.75% of F.S. or lower
Resistance Thermometer (RTD) Input Specifications	Input Range	Pt100/Pt200/Pt500/Pt1000/Ni100/Ni200
	Connection Type	2 wires/3 wires/4 wires
	Input Filters	4 stages
	Conversion Speed	400 ms or lower
	Conversion Precision (Typical Example) (at 25°C 77°F)	Pt100: 0.2% of F.S. or lower (2 wires, -200°C to 850°C -328°F to 1562°F), Pt1000: 0.2% of F.S. or lower (2 wires, -200°C to 850°C -328°F to 1562°F)
	Conversion Precision (Typical Example) (at -40 to +70°C -40°F to +158°F)	Pt100: 0.85% of F.S. or lower (2 wires, -200°C to 850°C -328°F to 1562°F), Pt1000: 0.85% of F.S. or lower (2 wires, -200°C to 850°C -328°F to 1562°F)
Thermocouple Input Specifications	Input Range	K: -270 to 1370°C -454 to 2498°F / B: 100 to 1820°C 212 to 3308°F / E: -270 to 1000°C -454 to 1832°F / J: -210 to 1200°C -346 to 2192°F N: -270 to 1300°C -454 to 2372°F / R: -50 to 1768°C -58 to 3214.4°F / S: -50 to 1768°C -58 to 3214.4°F / T: -270 to 400°C -454 to 752°F C: 0 to 2315°C 32 to 4199°F / G: 0 to 2315°C 32 to 4199°F
	Input Filters	4 stages
	Conversion Speed	400 ms or lower
	Conversion Precision (Typical Example) (at 25°C 77°F)	K thermocouple: 0.7% of F.S. or lower (-200°C to 1370°C -328°F to 2498°F)
	Conversion Precision (Typical Example) (at -40 to +70°C -40°F to +158°F)	K thermocouple: 1.35% of F.S. or lower (-200°C to 1370°C -328°F to 2498°F)
Environmental resistance	Enclosure rating	IP65/IP67/IP69K
	Ambient temperature	-40°C to +70°C -40°F to +158°F (no freezing)
	Vibration resistance	5 to 150 Hz/20 G/10 sweeps each in X, Y, and Z axes
	Shock resistance	15 G/11 ms/3 times each in X, Y, and Z axes
Case Material		Housing: PA6-GF30 Connector: SUS303
Weight		Approx. 190 g 6.70 oz

Keyence KL-16BR Keyence

5,008.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GS-P8CC1 Keyence

0.00 kr

Sold Out

Specifications

Model				GS-P8CC1
Type				For extension/Standard type (8-pin)
Length				1 m 3.28'
Weight				Approx. 70 g

Keyence GL-R08 Keyence

25,907.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-CN10R Keyence

23,030.00 kr

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87396 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87396
Type				Connector cable
Applicable product				LR-Z series
Number included				1
Cable end				M8 straight - Pre-wired
Number of core				3
Length				2 m 6.56'
Material				Cable: PVCConnector: Brass nickel plating
Weight				80

Keyence SZ-VNC03 Keyence

0.00 kr

Sold Out

Specifications

Model				SZ-VNC03
Overview				Ethernet main unit connection cable for the SZ-V32N type
Applicable product				SZ-V Series (Network type)
Cable end				RJ45 (connected to the SZ-V) - M12 connector, 4-pin female
Length				0.3 m 0.98'
Material				PVC
Weight				Approx. 110 g

Keyence OP-88898 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88898
Female				M12 8pin L-shape
Male				Strand wire
Length				10 m 32.8'
Material				cable: PVC connector: SUS316L

Keyence CA-LF43Y Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-VA1120 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-VA1120
Compatible with GL-V models				GL-VM111F, GL-VM56H, GL-VM28L (both PNP/NPN)
Total length				1120 mm 44.09"
Material				Polycarbonate ABS
Weight				120 g

Keyence GL-VM18LN Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM18LN
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			18
Total length			720 mm 28.35"
Detection height			680 mm 26.77"
Protection height			765 mm 30.12"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.6
		OFF→ON	46.7 ^*3
		All blocked→ON	52.9 ^*4
	With channel A or B	ON→OFF	12.0
		OFF→ON	57.6 ^*3
		All blocked→ON	73.9 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	94 ^*5
		Receiver	107 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	51 ^*5
		Receiver	57 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		480 g 16.94 oz
	Receiver
	Total		960 g 33.88 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.