Machine Vision Systems

Keyence AT-005VH Keyence

10,363.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-R64H Keyence

13,126.00 kr

In stock, 16 units

Specifications

Model			GL-R64H
Detection capability			ø0.98" ø25 mm
Total length			50.39" 1280mm
No. of beam			64
Detection height			49.61" 1260mm
Protection height			51.38" 1305mm
Beam axis spacing/Lens diameter			20 mm / ø5 0.79" / ø0.20"
Detecting distance			0.66 to 49.21' 0.2 to 15 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	11.3
		OFF→ON	55.8^*2
		All blocked→ON	82.1^*3
	Optical synchronization system (Channel A or B)	ON→OFF	16.4
		OFF→ON	63.4^*2
		All blocked→ON	102.5^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	73
		Receiver	83
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		1780 g
	Receiver		1790 g
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence OP-87337 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87337
Overview				Specialised stand for securing the macro lens to the equipment.
Applicable product				CA-LM0210, CA-LML0210
Weight				Approx. 980 g

Keyence KV-CA1W Keyence

24,576.00 kr

Only 3 units left

Specifications

Model		KV-CA1W
General specifications	Vibration resistance	10 to 500 Hz; Power spectral density: 0.033 G²/Hz; X, Y, and Z directions
	Operating ambient temperature	0 to +50°C 32 to 122°F (No freezing)
	Operating ambient humidity	35 to 85% RH (No condensation)
	Storage ambient temperature	−20 to +60°C -4 to +140°F (No freezing)
	Storage relative humidity	35 to 85% RH (No condensation)
	Enclosure rating	IP65F^1^2
	Pollution degree	3
Performance specifications	Installation distance	100 mm 3.94" to ∞
	Focal distance	1.05 mm 0.04" (fixed)
	Field of view	Horizontal field of view: Approx. 180° Vertical field of view: Approx. 150°
	Image-receiving element	1/2.9-inch color CMOS
	Resolution	1280 (H) × 960 (V)
	Frame rate	10/30 fps
	Internal current consumption	70 mA or less ^*3
	Weight	Approx. 140 g 4.94 oz
^1 The enclosure rating is evaluated with the camera cable connected. ^2 “F” signifies evaluation as oilproof per JIS C 0920. ^*3 Maximum current consumption inside the camera when the power supplied to the CPU unit is 24 VDC (−15%/+20%). The maximum current consumption inside the camera is 120 mA when the unit power supplied to the camera is 12 to 24 VDC (−10%/+20%).

Keyence FD-ECH8 Keyence

9,326.00 kr

Only 3 units left

Specifications

Model			FD-ECH8
Pipe size	Outer diameter of pipe		ø8 0.31"
	Installable range		8.0 0.31" ± 0.15 mm 0.01"
	Pipe materials		Polyurethane, nylon, PFA,^1 other^2
Supported gases			Air, nitrogen, argon, and other gases^*3
Supported gas temperature			−10°C to +60°C 14 to 140°F
Operating pressure range			0 to 0.75 MPa (upper limit depends on pipe specifications)
Flow rate detection principle			Ultrasonic transmission time difference method
Rated flow rate	(volume flow rate)		70 L/min 2.47 CFM * Initial display
	(20°C 68°F, atmospheric pressure conversion)	Gas at 20°C 68°F, 0.2 MPa	210 L/min 7.41 CFM
		Gas at 20°C 68°F, 0.4 MPa	350 L/min 12.36 CFM
		Gas at 20°C 68°F, 0.6 MPa	490 L/min 17.3 CFM
Repeatability			Response time 250 ms: ±2.5% of F.S.^4^5
Display resolution	Instantaneous flow		0.01/0.1/1 L/min
	Accumulated flow		0.01/0.1/1/10/100 L
Display method			Output indicator
Environmental resistance	Enclosure rating		IP65 (IEC60529)
	Ambient temperature		−10°C to +60°C 14 to 140°F (no freezing)
	Relative humidity		35%RH to 85%RH (no condensation)
	Vibration resistance		10 to 500 Hz, power spectral concentration: 0.816 G²/Hz, XYZ axes
	Shock resistance		100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material	Sensor unit		PBT/PAR/iron
	Sensor surface		Special rubber
Weight			Approx. 105 g 3.70 oz
^1 Use PFA tubes in an environment with a temperature of 40°C 104°F or less. ^2 Resin tubes that transmit ultrasonic waves. ^3 Gases that transmit ultrasonic waves. Measurement may be unstable due to the pressure inside of the pipe and the type of gas. ^4 Accuracy improves with longer response times. As a rule, this is by a proportion of √(250 ms/response time)x. ^*5 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by factors such as the condition and type of pipes as well as the temperature and type of gas.

Keyence OP-87773 Keyence

1,421.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-GD150U Keyence

0.00 kr

Sold Out

Specifications

Model				FD-GD150U
Pipe size/Outer diameter				6" (150 A) ø163 to ø171 mm ø6.42" to ø6.73"
Weight				Approx. 0.77 kg

Keyence OP-89072 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-H47F Keyence

15,751.00 kr

Only 2 units left

Specifications

Model		FD-H47F
Type		Hose model
Supported pipe diameter		ø33–47.9 ø1.299"-1.886"
Supported pipe materials		Soft plastic piping, all hoses (braided hoses, pressure-resistant rubber hoses, etc.)^*1
Supported fluids		All fluids (water, oil, chemicals, etc.)^*1
Supported fluid temperature		0–100°C 32–212°F (no freezing on pipe surface)^*2
Maximum rated flow		300 L/min 79.3 gal/min
Zero cut flow rate		2.0 L/min 0.5 gal/min (variable, initial value)
Detection principle		Delta TOF
Function for automatic correction for speed of sound in liquid		—
Display		QVGA 2.0 model: color LCD, status indicator light
Display update cycle		Approx. 10 times/second
Display resolution	Instantaneous flow	0.01/0.1/1 (L/min) (default value: 1)
	Integrated flow	0.01/0.1/1 (L) (default value: 1; up to 8 digits)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		—
Repeatability		0.5 s: ±1.0%, 1 s: ±0.7%, 2.5 s: ±0.45%, 5 s: ±0.3%, 10 s: ±0.2%, 30 s: ±0.15%, 60 s: ±0.1% of F.S.^3^4
Hysteresis		Variable
Flow units		L/min m³/h G/min
Pulse output increments (L)		0.02–999.99
Pipe temperature measurement accuracy		—
Network support		IO-Link^*5
Heat calculation function	Unit	MJ/h kW kBTU/h^*6
	Display resolution	Instantaneous value (MJ/h): 0.01/0.1/1 (default value 0.1); Integrated value (MJ): 0.01/0.1/1 (default value 0.1)^*6
	Pulse output increments (MJ)	0.02–999.99^*6
Data accumulation	Accumulation period	Approx. 1 year
	Data reading	USB2.0
Power I/O connector		M12 8-pin connector (male)
I/O (switchable)	Output (Ch1/2/3/4)	Instantaneous flow mode / area mode / pulse output mode / integrated flow mode / bubble detection mode / error output NPN/PNP setting switching, open collector output 30 VDC or less, max. 100 mA/Ch or less, residual voltage 2.5 V or less
	Analog output (Ch1/2)	4–20 mA/0–20 mA (switchable), load resistance 500 Ω or less
	External input (Ch2/3)	Integrated reset input / flow-rate zero input / zero-point adjustment input / bank input Short circuit current: 1.5 mA or less; input time: 20 ms or more
Power supply	Power voltage	20–30 VDC, ripple (P-P) 10% included, Class 2/LPS
	Current consumption	240 mA or less (when using flow sensor standalone; with analog output; excluding load current)^*7
Protection circuit		Protection against reverse power connection, power supply surges, output short circuits, and output surges
Environmental resistance	Enclosure rating	IP65/67 (IEC 60529)^*8
	Ambient temperature	Sensor head: −20 to +60°C –4 to +140°F (no freezing); Display unit: −20 to +50°C –4 to +122°F (no freezing)^*2
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z axes
Material	Display unit	Body: PPS/PET/POM; Display window: PAR
	Sensor head	Body: PPS/PET/PAR/SUS304; Cable: PVC Sensor element: special rubber; Mounting bracket: PPS/PBT/POM/SUS304/SUSXM7
Weight		approx. 1130 g 39.86 oz
^1 For fluids through which ultrasonic waves propagate, and which do not contain a large quantity of bubbles. Detection may be unstable depending on the type and condition of the pipe. ^2 When the display unit is mounted directly on the sensor head, there is a de-rating according to the ambient temperature and fluid temperature. ^3 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type and condition of the customer’s pipes, the type of fluid, the fluid temperature and other factors. ^4 In a state where flow velocity distribution is stable. Does not include pulsation and fluctuations in flow velocity distribution due to equipment factors. Please also convert the given F.S. (full scale) using the rated flow range. ^5 Supports IO-Link specification v.1.1/COM2 (38.4 kbps). Setting files can be downloaded from the KEYENCE website (www.keyence.com). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^6 Can be used when two temperature sensors (sold separately) are connected. ^7 640 mA or less including load. When connecting devices such as temperature sensors, please add on the current consumption of each sensor (up to a maximum of 830 mA or less). ^8 When a USB connection is in use, IP65/67 compliance is impaired.

Keyence CA-DBW34H Keyence

21,541.00 kr

Only 3 units left

Specifications

Model				CA-DBW34H
Type				High-Intensity, Large Bar Light
LED color				White
Diffusion plate				A diffusion plate is included with the CA-DBWxxH. The thickness of the diffusion plate is approximately 2 mm 0.08".
Power consumption				18.4 W × 2 ch^1^2
Input voltage				12 VDC
Polarizing diffusion plate				OP-87977^*3
Weight				Approx. 1,050 g
^1 Connect these models to both channels. ^2 A diffusion plate is included with the CA-DBWxxH. The thickness of the diffusion plate is approximately 2 mm 0.08". ^*3 The included diffusion plate and polarizing diffusion plate cannot be used with the product at the same time. There may be air bubbles or foreign substances on the surface of the polarizing diffusion plate, but these have no effect on the image quality. Even if such substances are present, the product is still within the inspection standards, and these substances do not indicate that the product is defective.

Keyence CL-AC2 Keyence

0.00 kr

Sold Out

Specifications

Model				CL-AC2
Length				2 m 6.6'
Weight				400 g

Keyence CV-X300E Keyence

24,075.00 kr

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87528 Keyence

2,060.00 kr

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88900 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88900
Female				M12 8pin L-shape
Male				Strand wire
Length				2 m 6.6'
Material				cable: Chemicalresistant PVC connector: PBT

Keyence OP-89087 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LX2-11WT Keyence

8,046.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FL-P20 Keyence

4,376.00 kr

Only 5 units left

Specifications

Model				FL-P20
Probe length				200^*1
Measurement range (dead zone excluded)				165 (120)^*2
Weight				Approx. 75 g
^1 Total length including the projected areas of the sensor refer to External Dimension Diagrams for details. Can be shortened up to 100 mm 3.93". ^2 If the probe is shortened

Keyence BT-GN6 Keyence

0.00 kr

Sold Out

Specifications

Model				BT-GN6
Type				Gun Grip Attachment
Weight				Approx. 600 g 21.18 oz (With Main Unit + Battery)

Keyence LV-21 Keyence

4,989.00 kr

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-VB32 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-VB32
Number included				2
Material				SUS304, NBR
Weight				160 g 5.64 oz ^*1
^*1 GL-V Mounting includes two mounting brackets. The weight stated is for both items.

Keyence CA-DZW45D Keyence

0.00 kr

Sold Out

Specifications

Model				CA-DZW45D^*1
Type				Diffuse Line Lights
LED color				White
Power consumption				19.8 W × 2 ch^*2
Input voltage				12 VDC
Weight				620 g
^1 The diffusion plate is integrated into the light and is not removable. When using a line scan camera, use DC Mode on the CA-DC21E/DC40E. ^2 Connect this model to both channels.

Keyence FR-LEXB43 Keyence

0.00 kr

Sold Out

Specifications

Model				FR-LEXB43
Type				Zener barrier with explosion-proof box
Input/Output				2-wire system
Explosion-Proof Specifications				AEx db [ia Ga] IIB T4 Gb AEx tb [ia Da] IIIC T135°C Db

Keyence OP-84338 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-84338
Overview				Connection connector to a display unit. Needed when cutting the cable.
Applicable product				GT2
Number included				2 pcs.
Note				Adjustable cable diameter: 1.15 to 1.35mm (Cable external diameter)

Keyence CA-DRM5X Keyence

7,137.00 kr

In stock, 12 units

Specifications

Model		CA-DRM5X
Type		Multi-Spectrum Lighting
Illumination method		Ring illumination (with support for optional CA-DRM (DA) Series dome attachment and CA-DRM (PA) Series polarization attachment^1) Multi-Spectrum lighting / LumiTrax lighting / Normal lighting (single-color lighting in all directions)^2 Constant current control mode (1,024-step digital gradation: With CA-DC60E connected / Adjustable per wavelength^*3)
Response speed		1 ms or less
LED	Peak wavelength	Ultraviolet: 405 nm / Blue: 457 nm / Green: 527 nm / Orange: 600 nm / Red: 660 nm Far red: 730 nm / Infrared: 860 nm / White: 600 nm (All values approximate)
Controller connection		Dedicated cable (3 m 9.8' / 5 m 16.4' / 10 m 32.8'), Max. 30 m 98.4' (with extension cables^*4)
I/F input		12-pole connector (dedicated cable)
Power consumption		51.4 W (during normal light emission)
Environmental resistance	Ambient temperature	0 to 40 °C 32 to 104 °F
	Relative humidity	65%RH or less (No condensation)
Weight		Approx. 560 g (With dome attachment: Approx. 680 g/With polarization attachment: Approx. 690 g)
^1 The UV and IR wavelengths cannot be used when the polarization attachment is attached. ^2 Continuous lighting can only be set during normal lighting when brightness value control is set to ON. ^3 Simultaneous lighting of multiple colors is not supported. ^4 Connection of up to two dedicated extension cables is allowed.