Machine Vision Systems

Keyence KV-LE20V Keyence

3,474.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-X200AP Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-GD20U Keyence

5,471.00 kr

Only 2 units left

Specifications

Model				FD-GD20U
Pipe size/Outer diameter				3/4" (20 A) ø25 to ø29 mm ø0.98" to ø1.14"
Weight				Approx. 0.19 kg

Keyence GL-SP5N Keyence

12,135.00 kr

Only 1 unit left

Specifications

Model				GL-SP5N
Type				Standard cable
Applicable product				GL-S Series main unit
Number included				1 (set includes transmitter and receiver)
Cable end				Main unit connection connector - Loose wires
Output				NPN
Number of core				6
Length				5 m 16.40'
Note				For use with wire synchronization and optical synchronization systems
Weight				260 g

Keyence S-P01 Keyence

0.00 kr

Sold Out

Specifications

Model				S-P01
Type				Sensor support tool
Applicable product				PZ2 Series

Keyence SV2-B100AK Keyence

0.00 kr

Sold Out

Specifications

Model				SV2-B100AK
General specifications	Applicable servo amplifier			SV2-100L2
	Rated output			0.85 kW
	Rated torque			5.39 N·m ^*1
	Instant maximum torque			14.2 N·m
	Rated current			6.9 Arms
	Instant maximum current			17 Arms
	Rated rotation speed			1500 min^-1
	High rotation speed			3000 min^-1
	Torque constant			0.859 N·m/Arms
	Rotor moment of inertia			16.0 ×10^-4kg·m²
	Rated power rating			18.2 kW/s
	Rated angle acceleration			3370 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (up/down, left/right) 24.5 m/s² 80.4'/s² (forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			phase F
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			5 ×
	Approx. weight			7.5 kg
Electromagnetic brake specifications	Capacity			10 W
	Rated voltage			24 VDC +10%/-0%
	Rated current (@20°C 68°F)			0.41 A
	Holding torque			12.7 N·m
	Release time			100 ms ^*2
	Operating time			80 ms ^*2
^1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^2 The release time and operation time of the electromagnetic brake vary depending on the discharge circuit.

Keyence OP-87757 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87757
Type				Display Panel Stand
Number included				1 pc
Weight				250 g

Keyence SV2-500L2 Keyence

7,451.00 kr

Only 1 unit left

Specifications

Model				SV2-500L2
General specifications	Capacity			5.0 kW
	Input power supply	Voltage/frequency	Main circuit	3-phase 200 to 240 VAC +10 to -15%, 50/60 Hz 270 to 324 VDC ^*1
			Control circuit	Single-phase 200 to 240 VAC +10 to -15%, 50/60 Hz 270 to 324 VDC ^*1
		Allowable frequency fluctuation	Main circuit/control circuit	No more than ±5%
		Overvoltage category		III
	Control mode			Three-phase full-wave rectification, IGBT, PWM control, sine-wave current driving method
	Feedback			22-bit serial encoder (absolute) communication, fully closed control serial communication, analog feedback
	Operating environment	Operating atmosphere	Enclosure rating	IP10
			Pollution degree	Pollution degree: 2 (in an IP54 or higher control panel) However, usage under the following requirements required: • No corrosive gas or flammable gas present • No exposure to water, oil, or chemicals • No dust present
		Operating ambient temperature		-5 to +60°C 23 to 140°F (no freezing; reduced ratings at +55°C 131°F or more)
		Storage ambient temperature		-20 to +85°C -4 to +185°F (no freezing)
		Operating/storage ambient temperature		95% RH or less (no condensation)
		Altitude		2000 m 6561.7' or less above sea level (usable at reduced ratings at 1000 m 3280.8' or more)
		Vibration resistance		4.9 m/s² 16.1'/s² (JIS C60068-2-6 compliant)
		Impact resistance		19.6 m/s² 64.3'/s² ( JIS C60068-2-27 compliant)
		Other		No static electricity noise, strong electric fields, magnetic fields, or radiation present
	Min. insulation resistance			500 VDC, 1 MΩ or more with insulation resistance tester
	Applied standard	UL/CSA standards		UL61800-5-1, CSA22.2 No.274
		CE marking	Low-voltage directive	EN61800-5-1, EN50178
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Structure	Type		Attached to base mount
	Safety function			STO function (STO/EN61800-5-2)
	Safety function	Safety parameters		SIL3/EN61508, SIL CL 3/EN62061, PLe (Category3) / EN ISO13849-1: 2008
		Response time		8 ms (max.)
		Input		STO1, STO2: Base block signal for power module Internal impedance: 4.7 kΩ Operable voltage range: +24 V ±20% Max. delay time: 8 ms (Time from turning STO1, STO2 off until motor current cutoff)
		Output		EDM: Built-in safety circuit status monitoring (fixed output) Max. allowable voltage: 30 VDC Max. allowable current: 50 mA DC Max. voltage drop at ON: 1.5 V Max. delay time: 8 ms (Time from changing STO1, STO2 until EDM change)
		Applied standard		EN61800-5-2, EN ISO13849-1: 2008, EN61508, EN62061, EN60204-1, EN61326-3-1
	Protection function			Overcurrent, overvoltage, undervoltage, overload, regenerative abnormalities, etc.
	Insulation withstand voltage			1500 VAC or more (between primary side and ground) 3000 VAC or more (between primary side and secondary side) 350 VAC: Between secondary circuit and ground
	Weight			Approx. 4.4 kg
Power supply/current capacity and power loss	Main circuit power supply			Three-phase 200 V
	Max. applicable motor capacity			5.0 kW
	Power supply capacity for 1 amplifier			Three-phase 200 V: 7.5 kVA
	Output current	Continuous		32.9 Arms
		Max.		84 Arms
	Main circuit power loss			263.7 W
	Regenerative resistor power loss			36 W
	Control circuit power loss			27 W
	Total power loss			326.7 W
	Rated input current	Main circuit		Three-phase 200 V: 25 Arms
		Control circuit		0.3 Arms
	Rush current	Main circuit		68 A
		Control circuit		34 A
Performance specifications	Performance	Speed control range		1:5000 (load torque ≤ rated torque conditions)
		Speed fluctuation rate	At load fluctuation	±0.01% or less with load fluctuations of 0 to 100% (at rated rotation speed)
			At main circuit voltage change	0% with ±10% of rated voltage (at rated rotation speed)
			At ambient temperature change	±0.1% or less with ambient temperatures of 0 to +50°C 32 to 122°F (at rated rotation speed)
		Torque control accuracy (reproducibility)		±1%
		Speed frequency response frequency		2.6 kHz
	Dynamic brake			Operated at main circuit power supply OFF, servo alarm, limit switch detection (LSP/LSN), forced stop detection (FSTOP)
	Regenerative resistor			Built-in regenerative resistor: 50 W to 400 W ... not installed 750 W to 5.0 kW ... installed External regenerative resistor: OP-84399 (50 W to 1.0 kW) OP-87073 (1.5 kW ^*2)
	Display Function	Panel function		7-segment LED Rotary switch ×2 (16 ch) Slide switch ×1 (4 ch)
		Status display LED		CHARGE: For notification of main circuit power supply input (orange) POWER: For notification of control circuit power supply input (green) CONNECT: For notification of connection (green) LINK1, LINK2: For notification of MECHATROLINK communication (green)
	Auxiliary function			Gain control, alarm history, Z-phase search, etc.
I/O specifications	Sequence input signal	Number of inputs		7 (3 high-speed input, 4 general input)
		Max. input voltage		28.8 VDC
		Rated input voltage		24 VDC
		Min. ON voltage		19 VDC
		Min. OFF current/voltage		High-speed input: 0.6 mA, general input: 0.3 mA
		Common point mode		7 points/1 common point (1 terminal) (bidirectional)
		Input time constant		250 μs, 500 μs, 1 ms, 2.5 ms, 5 ms, 10 ms
		Input current		High-speed input: 4.5 mA, general input: 3.7 mA
		Input impedance		Approx. 4.7 kΩ
		Assignable input signals		Full signal assignment, logic-settable forced stop (FSTOP), external latch signals 1 to 3 (EXT1, EXT2, EXT3), origin return deceleration switch (DEC), forward limit switch (LSP), reverse limit switch (LSN), forward torque limit selection (PTL), reverse torque limit selection (NTL)
	Sequence output signal	Number of outputs		4
		Output mode		Transistor NPN output
		Rated load		30 VDC / 50 mA
		Leakage current when OFF		0.1 mA
		Residual voltage when ON		1.5 VDC or less
		Common point mode		Independent common
		Assignable output signals		Individual signal assignment excluding ALARM signal, logic-settable alarm (ALARM), in position (INPOS), speed matching (VCMP), zero speed detection (ZSP), operation preparation complete (RDY), torque limiting (TLM), speed limiting (VLM), electromagnetic brake timing (BRAKE), warning (WARN), Positioning proximity (NEAR)
	Analog Feedback Input signal monitor	Max. input voltage		±12 V
		Accuracy		±1% of F.S.
		Resolution		±10 bits
		Input impedance		30 kΩ
	Encoder division pulse output signal	Output mode		Phase A (A+/A−), phase B(B+/B−), phase Z (Z+/Z−): Differential line-driver output
		Line driver		SN75ALS174 (T.I.) or equivalent
		Output frequency		1.6 Mbps (with 2-phase, 4 times multiplication, 6.4 MHz or equivalent) ^*3
	Analog monitor output	No. of channels		2 ch
		Output range		±10 V (linearity valid range ±8 V)
		Resolution		16 bits
		Conversion precision		±20 mV (typ.)
		Max. allowable load current		±10 mA
		Conversion speed		1.2 ms (typ.)
Communication specifications	MECHATROLINK-III communication	Communication protocol		MECHATROLINK-III
		Station address		03H to EFH (Max. number of connectable slaves: 62)
		Transmission speed		100 Mbps
		Transmission frequency		125 μs, 250 μs, 500 μs, 750 μs, 1 to 4 ms (in multiples of 0.5 ms)
		Communication cycle		Support for values starting at transmission frequency × 1
		Number of transmitted bytes		32 bytes/station, 48 bytes/station (selectable with slide switch)
		Transmission media/cable		Category 5e-compliant, STP cross cable
		Operating specifications		Position control / speed control / torque control
		Command input		MECHATROLINK-III command (sequence, motion, monitor, adjustment, etc.)
		Max. transmission distance		50 m 164.0' ^*4
	USB communication	Connected device		PC
		Communication standard		USB 2.0-compliant
		Function		Status display, parameter setting, tuning, etc.
^1 When using a DC power supply input, set “AC/DC power supply” to “DC”. ^2 Use of 2 kW, 3 kW, and 5 kW servo amplifiers is possible depending on the operating conditions. ^3 The division ratio can be set arbitrarily with a parameter. ^*4 For instances with 30 m 98.4' or more, use ferrite cores (OP-84409) with 2 turn-winding.

Keyence KV-700 Keyence

4,318.00 kr

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88714 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-67MTG Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence BT-W70GA Keyence

5,790.00 kr

Only 1 unit left

Specifications

Model			BT-W70GA
Type			Laser Type
Controller	CPU		ARM Cortex^®-A8 (800MHz)
	OS		Microsoft^® Windows^® Embedded Compact 7
Main Memory	RAM		256 MB
	ROM		512 MB
Display	Screen	Type	2.4 inch transmissive TFT LCD
		Resolution	240 × 320 (QVGA)
		Color	65,536 colors
		Backlight	Super luminosity white LED
	Operation status LED		Tri-color LED (red, green, blue, yellow, cyan, magenta and white)
Operations	Keyboard	Type	24 keys
Scanner	Reading Specification	Reading Light Source	Visible light semiconductor laser (655 nm) Output 1.0 mW Class 2 Laser Product (IEC60825-1) ^*1
		Pointer Light Source	-
		Scan Count	100 scans/second
		Minimum Resolution	0.127 mm 0.01"
		Reading Distance	62 to 542 mm 2.44" to 21.34" (narrow bar width 1.0 mm 0.04") 42 to 222 mm 1.65" to 8.74" (narrow bar width 0.25 mm 0.01")
		Reading Width (Field Range)	-
		PCS	0.45 or more (reflection rate of space part 70% or more)
	Supported Code		JAN/EAN/UPC (add-on code compatible), CODE128, GS1-128, CODE39, NW-7(Codabar), CODE93, ITF, Industrial2of5, COOP2of5, GS1 DataBar
Wireless Communication	Wireless LAN	Wireless Radio	IEEE802.11a/b/g/n
		Frequency Range	2.4 GHz (b/g/n: 1 - 11 ch), 5 GHz(a/n: W52, W53, W56, W58), W52 can only be used indoors.
		Distance	Indoors: 100 m 328.1' of vision
		Security	Security: WEP(64/128bit)/WPA/WPA2, WPA encryption: TKIP/AES, Authentication: WPA(2)-PSK / TLS / PEAP /TTLS / LEAP / EAP-FAST
	Bluetooth	Wireless Standard	Bluetooth^® V2.1 +EDR
		Supported Profile	SPP, PAN(PANU), FTP(Client), HSP(AG), HID(Host/Device)
		Distance	Approx. 10 m 32.8'
Power Source	Main Battery	Type	Rechargeable, removable Lithium ion battery pack
		Capacity	1100 mAh
		Continuous usage time	Approx. 12 hours ^2^3
		Charging Time	Approx. 3 hours (at room temperature)
	Backup battery	Clock	Approx. 1 months ^4^3
		RAM data	Approx. 1 minutes ^4^3
Others	Buzzer		Musical tones: 16 tones, Volume: 3 levels
	Vibration function		Enable
	Clock Accuracy		± 80 seconds per month (at room temperature)
Environmental resistance	Enclosure rating		IP54 (IEC60529)
	Ambient temperature		-5 to +50 °C 23 to 122 °F (No freezing)^*5
	Relative humidity		20 to 85 % RH (No condensation)
	Storage temperature		-20 to +60 °C -4 to 140 °F (No freezing)
	Storage relative humidity		20 to 85 % RH (No condensation)
	Drop Resistance		1.5 m 5.0' (multiple drops to concrete)^*3
Accessory			Wrist strap
Dimensions			156 × 53 × 34.7 (21.3) mm 6.14" × 2.09" × 1.37" (0.84") (grip thickness)
Weight			130 g (with battery pack)
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 This indicates the case when barcodes are read once per 20 seconds and round trip wireless communication is made at room temperature with the operation status LED, vibration function OFF, the buzzer ON (low volume), the backlight ON (brightness 1) and the charging mode2. ^3 This is a typical value at room temperature, but not a guaranteed value. ^4 This indicates the case when the main battery is not attached or the battery level is low, and operations are performed at room temperature. ^*5 Replace the main battery at a temperature of -5 °C 23 °F or higher. The product may not start in low-temperature environments.

Keyence OP-3108 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-3108
Overview				Teflon cap with M10 inner diameter. Protect from weld spatter.
Applicable product				EH-110
Material				PTFE

Keyence FU-38V Keyence

1,827.00 kr

Only 6 units left

Specifications

Model		FU-38V^*1
Beam emitting direction		Flat
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø1.0×2
Minimum bend radius		R10 mm0.394"
Minimum detectable object		Copper wire with a diameter of 0.080.0031"^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 5 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence CA-DSR9 Keyence

8,700.00 kr

Only 9 units left

Specifications

Model				CA-DSR9
Type				Back Light
LED color				Red
Power consumption				14 W
Input voltage				12 VDC
Weight				Approx. 110 g

Keyence FU-92 Keyence

5,164.00 kr

Only 5 units left

Specifications

Model		FU-92^*1
Optical axis diameter (Standard target to be detected)		ø3.7 mm0.146"
Beam emitting direction		Top
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2
Minimum bend radius		R40 mm1.575"
Minimum detectable object		Object with a diameter of 0.2 mm0.008"^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 71 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence OP-8713 Keyence

0.00 kr

Sold Out

Buy the Keyence OP-8713 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence OP-8713 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence OP-88546 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LMHR40 Keyence

0.00 kr

Sold Out

Specifications

Model		CA-LMHR40^*1
Optical magnification		x3.45 to x4.41
Max. compatible image sensor size		2/3"
Field of view		2/3": Low magnification 2.4 x 2.1 mm 0.09"x 0.08", High magnification 1.9 x 1.6 mm 0.07" x 0.06" 1/1.8": Low magnification 2.0 x 1.5 mm 0.08" x 0.06", High magnification 1.6 x 1.2 mm 0.06" x 0.05"
F-stop range (aperture)		Low magnification: 8.6 to 183, High magnification: 11 to 234
Resolving power		Center/periphery: 120 cycles/mm
WD		Low magnification: 65.9 mm 2.59", High magnification: 65.9 mm 2.59"^*2
TV distortion		Low magnification: 0.015 %, High magnification: -0.002 %
Depth-of-field		Low magnification: 0.108 mm 0.004", High magnification: 0.066 mm 0.002"^*3
Mount		C-mount
Pixel resolution (US 3.5 µm 0.14 Mil: low magnification to US 4.4 µm 0.17 Mil: high magnification)		1 µm 0.04 Mil/pixel^*4
Resolution		1.68 µm 0.07 Mil^*5
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	80% RH or less (No condensation)
Weight		Approx. 650 g
^1 The above values were calculated according to optical design values. Actual values for individual lenses will differ according to precision of assembly. ^2 WD indicates the distance from the tip of the lens to the workpiece. Changing the magnification changes this distance. ^3 The depth-of-field is a theoretical value calculated with an F-stop of 16 and a circle of least confusion of 40 µm 1.57 Mil. This varies depending on the F-stop. ^4 The pixel resolution is the field of view per pixel. This varies depending on the camera used. US = Unit cell size (size of 1 pixel) The CA-LMHR Series can also be used at pixel resolutions other than those listed here depending on the optical magnification. ^*5 The smallest resolvable feature able to be detected under 550 nm wavelength light.

Keyence OP-87410 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87410
Type				Robust Fittings
Applicable product				LR-Z Series
Material				SUS316L
Note				When installing connector type, only L-shaped connector cable can be mounted.
Weight				Approx. 170 g

Keyence AP-12SK Keyence

7,984.00 kr

Only 1 unit left

Specifications

Model		AP-12SK
Type		Positive (Low) Sensor Head
Rated pressure		0 to 14.5 PSI
Fluid type		Gases and liquids compatible with 304 and 630 stainless steel
Type of pressure		Gauge pressure
Repeatability		0.5 % of F.S. max.
Connection port		1/8 NPT
Environmental resistance	Enclosure rating	IP67
	Pressure resistance	72.5 PSI
	Ambient temperature	-10 to 70°C(14 to 158°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 3 hours respectively
	Shock resistance	500 m/s² in X, Y, and Z directions 10 times respectively (60 times in total)
Material		Diaphragm pressure port: TYPE S17400 stainless steel, Pressure port: 304 stainless steel, Throttle: 304 stainless steel (AP-14SK/15SK/16SK only)
Accessories		Sensor head connector: 1
Weight		Approx. 120 g

Keyence CA-DZW50X Keyence

0.00 kr

Sold Out

Specifications

Model		CA-DZW50X
Type		LumiTrax^TM (specular reflection mode) line lighting
LED color		White
Controller connection		Dedicated cable (3 m 9.8', 5 m 16.4', 10 m 32.8') , 30 m 98.4' max. (when using extension cables^*1)
Rating	Power/current consumption	105 W (4.9 A^*2)
Weight		Approx. 3300 g
^1 Up to two extension cables can be connected to the dedicated cable. ^2 When using the CA-DZW30X/DZW50X, the power supply cable with connector (accessory) will be required to provide the necessary 24 VDC external power supply.

Keyence GL-RB32 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-RB32
Type				Vibration Isolator for Adjusting Bracket
Applicable product				GL-R Series
Number included				Vibration-proof rubber feet: 2 units, Bracket: 2 units, Instruction manual: 1 manual
Material				Vibration-proof rubber feet: EPDM, Bracket: SPHC
Weight				Approx. 135 g

Keyence SJ-C10H Keyence

0.00 kr

Sold Out

Specifications

Model				SJ-C10H
Type				10 pin to 10 pin cable
Applicable product				SJ-H036*
Length				10 m 32.8'