Machine Vision Systems

9,051.00 kr

Only 4 units left

Specifications

Model		PX-H61G^*1
Type		M12 Reflective Armored
Light source LED		Red 4-element LED (Wavelength：635 nm)
Detecting distance	TURBO	400 mm 15.7"
	SUPER	600 mm 23.6"
	ULTRA	1200 mm 47.2"
	MEGA	2000 mm 78.7"
Detectable object		―
Spot diameter		Approx. 15 x 15 mm 0.59" at 100 mm 3.94" Approx. 65 x 65 mm 2.56" at 500 mm 19.69"
Environmental resistance	Enclosure rating	IEC: IP68/JEM: IP68g/NEMA: 4X, 6P, 13/DIN: IP69K
	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Case material		Housing ：SUS303 (Plastic parts：PMP, POM) Lens ：BK7
Accessories		Screw nut x 2, toothed washer x 1
Weight		Approx. 220 g^*2 (Including cable)
^1 Contact KEYENCE for cable length variations of spiral types. ^2 The PX-H71G, H72G and H61G have SUS304 spiral protective tube on the cables.

Keyence CV-X352F Keyence

34,201.00 kr

In stock, 11 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DXB5 Keyence

0.00 kr

Sold Out

Specifications

Model				CA-DXB5
Type				Coaxial Light (On-Axis)
LED color				Blue
Power consumption				4.9 W
Input voltage				12 VDC
Weight				Approx. 230 g

Keyence EX-V01E Keyence

11,347.00 kr

Only 1 unit left

Specifications

Model		EX-V01E
Type		Controller
Shape		ø5.4 x 18 mm ø0.21" x 0.71" Cylindrical
Measuring range		0 to 1 mm 0.04"
Display range		-19,999 to +19,999
Linearity		±0.3% of F.S.
Resolution (No. of averaging measurements: 64)		0.4 µm 0.016 Mil
Sampling rate		40,000 samplings max./sec. ^*1
Display speed		20 times/sec. (2-color, 7-segment LED)
Display power		7-segment 2-color LED
Over-range alarm		±FFFF is displayed.
Control input	Timing input	NPN open-collector or non-voltage contact signal
	Reset input
	Auto-zero input
	Judgment output: Inhibit input
	Synchronization/external settings input
Control output	Setting method	Upper/lower 2-level setting x 4 patterns (selectable)
	Signal	NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.)
	Response time	0.075 ms (at maximum speed)
	OFF-delay time	60 ms (ON/OFF selectable)
Strobe output		NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.O.)
Alarm output		NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.C.)
Analog output voltage	Output voltage	±5V
	Impedance	100 Ω
	Response time	0.075 ms (at maximum speed)
Temperature characteristics		0.07% of F.S./°C ^*2
Major functions		FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	240 mA or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 235 g
^1 When the digital filter function is used, the sampling rate is 20,000 sampling/sec. ^2 When the distance between the sensor head and the target is within 50% of the measuring range.

Keyence PG-610 Keyence

9,998.00 kr

Only 7 units left

Specifications

Model		PG-610
Type		Amplifier
Detecting area		21 x 21 mm 0.83" x 0.83"
Minimum detectable object		0.5 mm 0.02" dia. min. opaque materials
Light source		Infrared LED
Sensitivity adjustment		1-turn trimmer
Indicator lamp		Output: Red LED, Stable operation: Green LED
Output	Control output	NPN: 100 mA max. (40 V max.) Residual voltage: 1 V max.^*1
	Self-diagnostic output	NPN: 100 mA max. (40 V max.) Residual voltage: 1 V max.^*2
	Response time	0.2 ms^*2
Off-delay time		0.5 / 70 ms (selectable)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	40 mA or less
Environmental resistance	Ambient light	Fluorescent lamp: 10,000 lux max., Sunlight: 1,500 lux max.
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Polycarbonate
Weight		Amplifier (including 3-m 9.8' cable): Approx. 100 g
^1 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP Output Converter. One-shot output (ON when target passes through sensor) ^2 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP Output Converter.

Keyence OP-87583 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87583
Cable end				M12 straight - Loose wire
Length				5 m 16.40'
Material				Covering: PUR, Nut: Nickel plating over zinc die-cast

Keyence CA-D10MXE Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-A05D Keyence

0.00 kr

Sold Out

Specifications

Model		FU-A05D^*1
Type		Array reflective model
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2
Minimum bend radius		R4 mm0.157"^*2
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*3
Tightening torque		0.3 Nm
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-40 to +70 °C -40 to 158 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Material		Main unit case : polybutylene terephthalate, case tips : liquid-crystal polymer, core fiber : acrylic, fiber sheath : polyethylene
Accessories		Mounting screws (M3 × ℓ8), fiber cutter
Weight		Approx. 20 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The section 10 mm in length from the base of the case is R10. ^*3 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence GL-RC20S Keyence

0.00 kr

Sold Out

Specifications

Model				GL-RC20S
Type				Extension Cable
Applicable product				GL-R Series
Number included				1 cable
Cable end				M12 connector (8-pin female) - Loose wires
Length				20 m 65.62'
Material				Connector for extension: PVC/nickel-plated brass, Cable: PVC
Note				Extension cable for the GL-R Series. Use this together with the main unit connection cable (for extension). Brown and blue: 22 AWG (nominal cross section: 0.34 mm²), other: 26 AWG (nominal cross section: 0.14 mm²)
Weight				Approx. 830 g

Keyence SZ-VCG03 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88697 Keyence

1,423.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-R7F Keyence

3,040.00 kr

Only 1 unit left

Specifications

Model		FU-R7F^*1
Type		Threaded and Hex-Shaped Active Receiver Fibers
Optical axis diameter		Transmitter: ø 1ø 0.04" Receiver: ø 3.2ø 0.13"
Size		M4
Fibre unit length		2 m6.6'Free-cut
Fibre unit diameter		ø 2.2ø 0.09"
Shape		Threaded
Minimum bend radius		R25 mmR0.98"
Environmental resistance	Ambient temperature	−40 to +60 ˚C -40 to +140 °F
Weight		Approx. 21 g
^*1 For details on the detecting distance, see the fiber amplifier catalog.

Keyence OP-88835 Keyence

358,798.00 kr

Only 3 units left

Specifications

Model				OP-88835
Length				2 m 6.6'

Keyence OP-M1903 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AT-V500 Keyence

12,422.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-XC20M2 Keyence

4,525.00 kr

Only 5 units left

Specifications

Model				FD-XC20M2
Supported diameter				Attachable range: ø 10.8 to 14 mm 0.43 " to 0.55 "
Weight				Approx. 250 g

Keyence OP-87723 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-B8XTD Keyence

3,210.00 kr

Only 5 units left

Specifications

Model		KV-B8XTD
Type		I/O unit
External connection method		Removable terminal block
Input	Number of inputs	8 points
	Input mode	24 VDC mode, 5 VDC mode
	Maximum input voltage	26.4 VDC
	Rated input voltage	24 VDC mode:24 VDC, 5.3 mA , 5 VDC mode: 5 VDC, 1 mA
	Minimum ON voltage	24 VDC mode:19 V , 5 VDC mode: 3.5 V
	Maximum OFF current	24 VDC mode: 1.5 mA
	Maximum OFF voltage	5 VDC mode: 1.5 V
	Common method	8 points/1 common (1 terminal)
	Input time constant	25 μs/300 μs^*1/1 ms/10 ms
	Input impedance	4.3 kΩ
Output	Number of outputs	8 points
	Output mode	MOSFET (sink) (with overcurrent protection function)
	Rated load	30 VDC, 0.3 A
	Leakage current at OFF	100 μA or less
	Residual voltage at ON	0.5 VDC or less
	Common method	8 points/1 common (1 terminal)
	Operation time	OFF to ON:100 μs or less ,ON to OFF: 300 μs or less
Internal current consumption		30 mA or less
Weight		Approx. 130 g
^*1 Configurable only when KV-8000A/7500/7300/5500/5000/3000 is connected. Cannot be selected when connected to KV-1000/700.

Keyence OP-25526 Keyence

6,571.00 kr

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LM2 Keyence

3,087.00 kr

Only 3 units left

Specifications

Model		CA-LM2^*1
Type		Standard
Optical magnification (reference magnification)		x2
Magnification range		Approx. ±3 % relative to reference axis
WD (at reference magnification)		66.9 mm 2.63" ^*2
Compatible image sensor size		1/2"
Field of view (at reference magnification)	1/3"	1.8 x 2.4 mm 0.071" x 0.094"
	1/2"	2.4 x 3.2 mm 0.094" x 0.126"
	2/3"	-
F-stop range (aperture)		15.4
Depth-of-field		400 µm 15.75 Mil^*3
Max. TV distortion		-0.04 %
Resolution		5.1 µm 0.20 Mil^*4
Mount		C-mount
Ambient temperature/humidity range		0 to +50 °C 32 to 122 °F, 80 % RH (No condensation)
Weight		Approx. 57 g
^1 The above values are all calculated according to optical design values. Actual values for individual lenses will differ according to precision of assembly. ^2 Working distance indicates a working distance of each lens at reference magnification. Working distance will vary depending on magnification adjustment. (Excluding CA-LM1/LMA1) ^3 The indicated depth-of-field is a theoretical value that assumes 1/2" or 2/3" image sensor size and a horizontal resolution of 320 TV lines. (Circle of least confusion is 40 µm 1.57 Mil in the image) ^4 The smallest resolvable feature able to be detected under 550 nm wavelength light.

Keyence OP-26501 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-26501
Type				Adapter B for f1 Fiber Unit
Applicable product				ø1.0 fiber unit
Number included				1 pcs.
Note				Necessary when small diameter fiber unit is used with FS-N/V/T/M Series. Adapter is attachment of the fiber unit.