Machine Vision Systems

1,525.00 kr

In stock, 11 units

Specifications

Model		FU-78^*1
Detecting method		Thrubeam
Optical axis diameter (Standard target to be detected)		ø1 mm 0.04"
Size		M4
Fibre unit length		2 m 6.56', Free-cut
Fibre unit diameter		ø1.3 ø0.05"
Shape		Threaded
Minimum bend radius		R4 mm R0.16"
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 9 g
^*1 For details on the detecting distance, see the fiber amplifier catalog.

Keyence NR-FV04 Keyence

19,677.00 kr

Only 5 units left

Specifications

Model		NR-FV04 ^*1
Type		Pulse measurement unit
Input method		Insulated single-end input, channels insulated from each other, input channels insulated from other units (PC)
Number of channels		4 ch ^*2
Measurement cycle		Maximum sampling cycle: 1 μs (1 MHz) to 60 s
A/D converting system		Successive approximation, simultaneous sampling of all channels
A/D resolution		14 bit
Input frequency band		250 kHz (−3 dB or more)
Low pass filter		PASS, 1.5 kHz, 15 kHz, 50 kHz
Pulse input	Input type	Pulse frequency, pulse count (Single-phase input)
	Maximum input voltage	±700 V ^*3
	Threshold voltage	+100 V, +50 V, +20 V, +10 V, +5 V, +2.5 V, +1 V, +500 mV, +250 mV, +100 mV, +50 mV, 0 V
	Minimum pulse duration	2 μs or more for both ON and OFF
	Hysteresis	AUTO, 100 mV, 500 mV, 5 V
	Pulse divisions	1 to 64 (Can be set to units of 1 division)
	Input coupling	DC rising edge, DC falling edge, AC rising edge, AC falling edge
	Digital filter	Pulse frequency: Averaging rate of 1 to 32768 (automatically selected), Pulse count: None
	Predictive functions	Predictive calculation, Stop prediction (OFF, ×1.5, ×3, ×5, ×8, ×16)
	Sensor power output	Dedicated connectors for OP-88003 (AUX POWER) × 2 when using OP-88003; +12 V, 50 mA or +5 V, 50 mA NPN open-collector output connectable, sensor power supply not insulated from system bus
Voltage input	Input type	±100 V, ±50 V, ±20 V, ±10 V, ±5 V, ±2 V
	Maximum input voltage	±700 V ^*3
	Digital filter	Averaging rate: 1 to 128 (automatically selected)
	Input coupling	DC, AC
	Common mode noise reduction ratio	80 dB or more (at up to 60 Hz DC)
	Residual noise level	0.02% of F.S., LPF: 1.5 kHz (200 μs/S, digital filter: ON); 0.05% of F.S., LPF: PASS
Measurement range	Pulse frequency	Measurable range: 0.05 to 16000.00 Hz, Display resolution: 0.01 to 1.00 Hz (selected automatically according to frequency)
	Pulse count	Measurable range: 0 to 65,000 counts/sampling cycle, Display resolution: 1 count
	±100 V	Measurable range: −110.000 to +110.000 V, Display resolution: 5 mV
	±50 V	Measurable range: −55.000 to +55.000 V, Display resolution: 2 mV
	±20 V	Measurable range: −22.000 to +22.000 V, Display resolution: 1 mV
	±10 V	Measurable range: −11.0000 to +11.0000 V, Display resolution: 0.5 mV
	±5 V	Measurable range: −5.5000 to +5.5000 V, Display resolution: 0.2 mV
	±2 V	Measurable range: −2.2000 to +2.2000 V, Display resolution: 0.1 mV
Measurement accuracy	Pulse frequency	±0.07% of rdg, ±0.01 Hz (20 Hz to 15 kHz, 20 ms/S, with digital filter ON)
	Voltage input	±0.1% of F.S., LPF: 500 Hz, with digital filter ON
Withstand voltage	Input to system bus/earth	2200 VAC (50/60 Hz) for 1 minute
Connector format		Insulated BNC connector
Input impedance		1 MΩ ±1%, approx. 30 pF
Buffer memory		16M data^*4
Warm up time		30 minutes or more
Maximum allowable voltage to ground		[When using OP-89263 1:1 voltage-resistant probe] Measurement terminal, GND terminal: 300 Vrms (CAT II); [When using OP-89264 1:1 voltage-resistant probe] Measurement terminal, GND terminal: 300 Vrms (CAT II); [When using OP-88998 10:1 voltage-resistant probe] Measurement terminal: 700 Vrms (CAT II), GND terminal: 300 Vrms (CAT II); [Direct input] Measurement terminal, GND terminal: 42.4 Vpeak and 30 Vrms, or 60 VDC ^*3
Rating	Power consumption	4 W or less (including OP-88003 sensor power supply)
Environmental resistance	Insulation resistance	500 VDC, 10 MΩ or more
	Ambient temperature	0 to +40°C 32°F to 104°F
	Relative humidity	10 to 85% RH (no condensation)
Weight		Approx. 270 g 9.53 oz
^1 The above specifications are the values when zero point adjustment is performed after the warm-up period in an environment with a temperature of 23°C ±3°C 73.4°F ±5.4°F. ^2 Max. expansion: 180 ch (with 45 units connected, using NR-X100W), 20 ch (with 5 units connected, using NR-500) ^3 At a frequency of 40 kHz or less ^4 Limited by the NR-X100W buffer memory when using the NR-X100W.

Keyence OP-87891 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KZ-R16T Keyence

13,111.00 kr

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-40G Keyence

5,856.00 kr

Only 3 units left

Specifications

Model		FU-40G^*1
Beam emitting direction		Top
Aperture angle		Approx 8°
Fibre unit length		1 m39.37" cannot be cut
Minimum bend radius		R10 mm0.394" , stainless
Environmental resistance	Ambient temperature	-40 to +50 °C -40 to 122 °F
Weight		Approx. 50 g
^*1 For details on the detecting distance, see the fiber amplifier catalog.

Keyence FU-77MTG Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence RC2-22K Keyence

13,599.00 kr

Only 1 unit left

Specifications

Model		RC2-22K
Operation method		Addition, subtraction, addition and subtraction
Operation mode		Overcount, auto reset, rotary, range distinction
Return method		Manual reset, external reset, automatic reset (in auto reset mode)
Display power		7-segment LED (character height: 14 mm)
Number of digits		5-digit display (zero suppression method), -9,999 to 99,999^*1
Prescale function	A	1 to 99 is counted per pulse input
	B	1 is counted per 1 to 99,999 pulse inputs
Power off memory time		Approx 10 years (at 20°C 68°F)
Input	System	Separate, instruction, phase difference
Mounting method		Panel mount (embedding)
External calibration input signal	Signal	No-voltage input (with contacts, without contacts [count input, inhibit input, reset input])
Highest counting speed		With contacts: 50 Hz, without contacts: 500 Hz, 5 kHz, 50 kHz (switchable; 1:1 ON:OFF ratio)
Control output	One-shot output time	0.01 s to 9.99 s (variable)
	Relay	Open-collector output: 10 ms (when set to 50 Hz), 1 ms (when set to 500 Hz), 100 µs (when set to 5 kHz), 15 µs (when set to 50 kHz)
DC output		12 VDC ± 10%, 100 mA maximum
Rating	Power voltage	100 to 240 VAC ±10 %, 50/60 Hz
	Power consumption	12VA or less
Environmental resistance	Insulation resistance	100 MΩ or more (tested with a 500 VDC megger) between all the AC external terminals and the case
Noise resistance		Square wave noise generated by a noise simulator, between the power supply terminals, 1 kV for 1 µs
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Withstand voltage	500 VAC for 1 minute (between all the external terminals and the case)
Weight		Approx. 320 g
^*1 Display uses the zero suppression method.

Keyence KV-LH20V Keyence

4,080.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence RB-1200 Keyence

489,802.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-10T Keyence

6,633.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XG-200C Keyence

24,920.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-HCB10G Keyence

0.00 kr

Sold Out

Specifications

Model				FD-HCB10G
Cable end				M12, 8-pin female - 6-core cable
Length				10 m 32.8'
Material				PVC
Weight				Approx. 420 g

Keyence CA-DRB9 Keyence

7,448.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-X452F Keyence

51,520.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LF27Y Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SZ-VP30 Keyence

5,924.00 kr

Only 5 units left

Specifications

Model				SZ-VP30
Type				18-core Power cable
Applicable product				SZ-V Series
Cable end				Connector (connected to the SZ-V) - Loose wires
Length				30 m 98.42'
Material				PVC
Weight				Approx. 2,200 g

Keyence KV-16DR Keyence

4,655.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-B005AS Keyence

10,696.00 kr

Only 2 units left

Specifications

Model				SV2-B005AS
General specifications	Applicable servo amplifier			SV2-005L2
	Rated output			50 W
	Rated torque			0.159 N·m ^*1
	Instant maximum torque			0.557 N·m
	Rated current			0.55 Arms
	Instant maximum current			2.0 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.316 N·m/Arms
	Rotor moment of inertia			0.0475 ×10^-4kg·m²
	Rated power rating			6.40 kW/s
	Rated angle acceleration			40200 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			35 ×
	Approx. weight			0.6 kg
Electromagnetic brake specifications	Capacity			5.5 W
	Rated voltage			24 VDC ±10%
	Rated current (@20°C 68°F)			0.23 A
	Holding torque			0.159 N·m
	Release time			60 ms ^*2
	Operating time			100 ms ^*2
^1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^2 The release time and operation time of the electromagnetic brake vary depending on the discharge circuit.

Keyence CL-H100 Keyence

23,309.00 kr

Only 1 unit left

Specifications

Model		CL-H100
Type		Expansion Unit
Number of optical unit connections		Supports two CL-H200 expansion units
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F
	Relative humidity	20% RH to 85% RH (no condensation)
Weight		Approx. 300 g

Keyence AI-F10H Keyence

0.00 kr

Sold Out

Specifications

Model				AI-F10H
Type				Polarized Light Filter Attachment for Separate amplifier models, Long range
Applicable product				AI-H160
Note				Included in sensor head package

Keyence EV-108UC Keyence

3,209.00 kr

Only 1 unit left

Specifications

Model		EV-108UC
Type		DC , Non-shielded
Shape		M8
Detecting distance		4 mm 0.16" ±10%
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		20 x 20 mm 0.79" x 0.79"
Hysteresis		20% max. of detecting distance, within -10 to +70°C 14 to 158°F
Response frequency		800 Hz
Operation mode		N.C.
Temperature characteristics		±10% max. of detecting distance, within -10 to +70°C 14 to 158°F
Control output (switching capacity)		5 to 80 mA
Protection circuit		Reversed polarity,surge voltage
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 20 % or less
	Current consumption (leakage current)	Current consumption (leakage current): 1.0 mA max., Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
	Residual voltage	Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Stainless steel (SUS304)
Accessories		Nut × 2, toothed washer × 1, instruction manual
Weight		Approx. 42 g

Keyence FL-001L Keyence

6,111.00 kr

Only 3 units left

Buy the Keyence FL-001L - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FL-001L is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence ER-U30N Keyence

0.00 kr

Sold Out

Specifications

Model		ER-U30N
Type		Ultra-long distance unshielded type Screw type M30 Cable NPN output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		Available
Button	Function	Distance switching
Detecting distance	With default settings (Mode 1)	52 mm 2.05" ±10% ^*2
	With distance switching (Mode 2)	32 mm 1.26" ±10% ^*2
Response frequency	With default settings (Mode 1)	10 Hz ^3 ^4
	With distance switching (Mode 2)	20 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		156 × 156 mm 6.14" × 6.14"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 100 mA or less for 1 output, or 100 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	NPN output: 1040 mW or less (44 mA or less at 24 V, 65 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Button: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 190 g 6.71 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence CA-HX200M Keyence

9,239.00 kr

Only 9 units left

Specifications

Model		CA-HX200M
Image element		Monochrome CMOS image receiving element, 16× high-speed reading using square-pixel, Unit cell size: 5 µm × 5 µm 0.20 Mil × 0.20 Mil
Valid pixel count		1.92 M pixels, 1600 (H) × 1200 (V)
Image size		Equivalent to 2/3 "
Scanning system		Progressive 11.6 ms^1, 20.1 ms^2
Pixel transfer frequency		195 MHz (×16 speed) ^1 130 MHz (×11 speed) ^2
Electronic shutter		Can be set to 0.01 to 100 msec by specifying the following numerical inputs: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 1/50000, 1/100000
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (no condensation)
Camera cable		High-speed camera cable CA-CHxx
Weight		Approx. 280 g (not including lens)
^1 When using the CV-X400 or CV-X200 Series with the CA-EC80HX/EC80L ^2 When the camera input unit CA-EC80 is used with a CV-X100 Series controller or with a CV-X200 Series controller