Buy Industrial Communication Industrial Automation Parts

5,257.00 kr

In stock, 11 units

Main

Characteristic	Value(s)
Range of Product	Modicon Quantum automation platform
Product or Component Type	Ethernet network TCP/IP module
Concept	Transparent Ready
Web server	Class C20
Web services	Data editor Rack viewer FactoryCast configurable
Communication Service	SNMP network management Modbus TCP messaging
Communication Port Protocol	Ethernet Modbus TCP/IP
Physical interface	MT/RJ - 100BASE-FX fiber optic RJ45 - 10BASE-T/100BASE-TX twisted pair
Transmission Rate	10/100 Mbit/s

Complementary

Characteristic	Value(s)
Redundancy	Yes hot standby redundant architecture
Supply	Via the power supply of the rack
Marking	CE
Local signalling	1 LED for 10 Mbps or 100 Mbps data rate (10 MB/100 MB) 1 LED for collision detection (Coll) 1 LED for download mode (Kernel) 1 LED for Ethernet module fault (Fault) 1 LED for Ethernet network status (RUN) 1 LED for full-duplex mode (Fduplex) 1 LED for module ready (Ready) 1 LED for network active (Link) 1 LED for rack operational (Active) 1 LED for transmission/reception activity (TxAct/RxAct)
Current consumption	750 mA 5 V DC
Module format	Standard
Product Weight	0.761 lb(US) (0.345 kg)

Schneider VW3M3402 Schneider

0.00 kr

Sold Out

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The interface card provides digital output for machine encoder. It is an interface card with a rated supply voltage of 12V for SSI encoder, 5V for A/B/I encoder, 5V for BISS encoder, 5V for EnDat 2.2 encoder. It is furnished with 15-way D-Sub (DE-15) female high definition connector for electrical connection. This product is compatible with Lexium 32M servo drive. Lexium 32 is a servo drive range with three or four servo drive models and two servo motor families plus an intelligent selection of options. Servo drives and servo motors from 0.15kW to 7kW for maximum performance.

Main

Characteristic	Value(s)
Range of Product	Lexium 32
Product or Component Type	Encoder interface module
Accessory / Separate Part Type	Card with digital output
Accessory / separate part category	Connection accessories
Accessory / separate part destination	Machine encoder
Encoder type	BISS EnDat 2.2 A/B/I SSI

Complementary

Characteristic	Value(s)
Product Compatibility	Lexium 32M
[Us] rated supply voltage	12 V SSI 5 V A/B/I 5 V BISS 5 V EnDat 2.2
Electrical connection	1 female connector high definition SUB-D 15

Schneider TM4ES4 Schneider

2,132.00 kr

In stock, 25 units

Module network TM4 4 Ethernet switchs

Schneider STBNIP2212 Schneider

3,529.00 kr

Only 7 units left

standard Network Interface Module STB - Ethernet - 10 Mbit/s

Schneider TCSEGDB23F24FA Schneider

9,140.00 kr

Only 6 units left

This proxy module is part of the Modicon M340 range, an offer of Programmable Automation Controllers (PAC). This module has 128 slaves, 10/100BASE-T and RS485 physical interfaces. It is a proxy module with an external current consumption 300mA at 24V DC. This Modbus Plus Proxy module allows PLCs to communicate with existing Modbus Plus devices without the need to modify these devices applications. It features 2 Ethernet TCP/IP - RJ45 for Modbus TCP and 2 Modbus - SUB-D 9 for Modbus plus for integrated connections. Its current consumption is 300 mA at 24V DC external. It shows a white coating. It is suitable for process industries, renewable energies, water, cement, manufacturing, infrastructures and machines applications. It conforms to UL 508, CSA 22.2, cUL, EMI EN 55011, EN 61131-2, and C-Tick specifications. This module is compatible with Modicon M340 Programmable Logic Controllers (PLC). The module is provided with a mounting plate, 2 front-mounted power supply connectors (2 positions). It can be attached either to a rack or to a DIN rail. Compact-shaped, Modicon M340 offers in small box flexibility and integrated functions. In the heart of process, it provides you plug and work solutions with both Schneider Electric and third party devices.

Main

Characteristic	Value(s)
Range of Product	Modicon X80
Product or Component Type	Modbus Plus proxy module
Range Compatibility	Modicon M340 Modicon M580
Structure type	Industrial bus

Complementary

Characteristic	Value(s)
Communication gateway	Ethernet Modbus TCP to Modbus Plus
Physical interface	10/100BASE-T RS485
Method of access	Token ring Modbus Plus CSMA/CD Modbus TCP
Transmission support medium	Modbus Plus single twisted pair cable Modbus TCP category 5 shielded twisted pair (STP)
Transmission rate	1 Mbit/s, 1476.4 ft (450 m) Modbus Plus per segment 1 Mbit/s, 5905.5 ft (1800 m) Modbus Plus with 3 repeaters 10...100 Mbit/s, 328.08 ft (100 m) Modbus TCP without repeater
Number of server device(s)	128
Communication service	Modbus TCP messaging Modbus Plus messaging Configuration control Diagnostics Modbus Plus server (scanned by the PLC) FDR SNMP network management Read/write variables Global Data Peer cop dialogue
Integrated connection type	2 Ethernet TCP/IP - RJ45 Modbus TCP 2 Modbus - SUB-D 9 Modbus Plus
Current consumption	300 mA 24 V DC external
Module format	Standard

Schneider BMXNOM0200 Schneider

3,650.00 kr

In stock, 18 units

Serial link module with 2 RS-485/232 ports in Modbus and Character mode

Schneider BMXNRP0200 Schneider

2,719.00 kr

In stock, 14 units

Fiber Converter MM/LC 2CH 100Mb

Schneider BMENOC0311 Schneider Electric

6,978.00 kr

In stock, 35 units

Ethernet module M580 - 3-port FactoryCast Ethernet communication

Schneider 490NRP25400 Schneider

48,372.00 kr

Only 8 units left

FIBER OPTIC TRANSMITTERS, RECEIVERS, TRANSCEIVERS FIBER OPTIC REPEATER, MBPL LINE

Schneider BMXXCAUSBH018 Schneider

1,361.00 kr

Only 6 units left

This programming cordset enables the connection between a Magelis XBT controller and a PC. It is equipped with one USB type mini-B male connector, PC side and one USB type A connector, controller side. It is 1.8 meters long.

Main

Characteristic	Value(s)
Range of Product	Modicon M340 automation platform Modicon M262
Accessory / separate part category	Connection accessories
Accessory / Separate Part Type	Terminal port/USB cordset
Accessory / separate part designation	3.4" small touch screen panel 3.5" small touch screen panel
Accessory / separate part destination	Graphic terminal XBTGT, XBTGK, XBTGTW PC terminal
Range Compatibility	Harmony GTO Modicon M262
Cable length	5.9 ft (1.8 m)

Complementary

Characteristic	Value(s)
Electrical connection	1 connector USB type A 1 connector mini B USB M340 processor)
Product Weight	0.143 lb(US) (0.065 kg)

Schneider BMXP342030 Schneider

14,959.00 kr

Only 9 units left

Main

Characteristic	Value(s)
Range of Product	Modicon M340 automation platform
Product or Component Type	Processor module
Concept	CANopen Transparent Ready
Number of racks	4
Number of slots	11
Discrete I/O processor capacity	1024 I/O multi-rack configuration 704 I/O single-rack configuration
Analogue I/O processor capacity	256 I/O multi-rack configuration 66 I/O single-rack configuration
Number of application specific channel	36

Complementary

Characteristic	Value(s)
Control channels	Programmable loops
Motion control	Independent axis CANopen
Integrated connection type	USB port 12 Mbit/s CANopen master bus SUB-D 9 2 twisted shielded pairs 20 kbit/s...1 Mbit/s Ethernet TCP/IP RJ45 1 twisted pair 10/100 Mbit/s
Communication module processor capacity	2 Ethernet communication module 4 AS-Interface module
embedded communication service	Network management (NMT) CANopen Process Data Object (PDO) CANopen Service Data Object (SDO) CANopen Special functions (SYNC, EMCY, TIME) CANopen Bandwidth management, Ethernet TCP/IP Data Editor, Ethernet TCP/IP Modbus TCP messaging, Ethernet TCP/IP Rack Viewer, Ethernet TCP/IP SNMP network administrator, Ethernet TCP/IP
Port Ethernet	10BASE-T/100BASE-TX
Transmission rate	1 Mbit/s 0.0000000000â¦65.6 ft (0â¦20 m) 0.0000000000â¦2.0 ft (0â¦0.6 m) 125 kbit/s 0.0000000000â¦1640.4 ft (0â¦500 m) 0.0000000000â¦32.8 ft (0â¦10 m) 20 kbit/s 0.0000000000â¦8202.10 ft (0â¦2500 m) 0.0000000000â¦984.3 ft (0â¦300 m) 250 kbit/s 0.0000000000â¦820.2 ft (0â¦250 m) 0.0000000000â¦32.8 ft (0â¦10 m) 50 kbit/s 0.0000000000â¦3280.8 ft (0â¦1000 m) 0.0000000000â¦393.7 ft (0â¦120 m) 500 kbit/s 0.0000000000â¦328.08 ft (0â¦100 m) 0.0000000000â¦32.8 ft (0â¦10 m) 800 kbit/s 0.0000000000â¦131.2 ft (0â¦40 m) 0.0000000000â¦19.7 ft (0â¦6 m)
Bus type	CANopen M20 DS 301 V4.02 devices linked by daisy-chaining or tap junctions CSMA/CA CANopen M20 DS 303-2 devices linked by daisy-chaining or tap junctions CSMA/CA CANopen M20 DS 405 devices linked by daisy-chaining or tap junctions CSMA/CA
Number of server device(s)	63 CANopen
Number of devices per segment	0â¦16 672.6 ft (205 m) CANopen) 0â¦32 607.0 ft (185 m) CANopen) 0â¦64 524.9 ft (160 m) CANopen)
Memory description	Supplied memory card (BMXRMS008MP) backup of programs, constants, symbols and data Internal RAM 4096 kB Internal RAM 256 kB data Internal RAM 3584 kB program constants and symbols Supplied memory card (BMXRMS008MP) activation of standard web server, class B10
Maximum size of object areas	256 kB unlocated internal data 32634 %Mi located internal bits
Default size of object areas	1024 %MWi internal words located internal data 256 %KWi constant words located internal data 512 %Mi located internal bits
Application structure	1 cyclic/periodic master task 64 event tasks No auxiliary task 1 periodic fast task
Execution time per instruction	0.12 Âµs Boolean 0.17 Âµs double-length words 0.25 Âµs single-length words 1.16 Âµs floating points
Number of instructions per ms	6.4 Kinst/ms 65 % Boolean + 35 % fixed arithmetic 8.1 Kinst/ms 100 % Boolean
System overhead	0.13 ms fast task 0.7 ms master task
Current consumption	135 mA 24 V DC
Supply	Internal power supply via rack
Marking	CE
Status LED	1 LED (Green) activity on Ethernet network (ETH ACT) 1 LED (Green) integrated machine/installation bus operational (CAN RUN) 1 LED (Green) processor running (RUN) 1 LED (Green) status of Ethernet network (ETH STS) 1 LED (Red) data rate (ETH 100) 1 LED (Red) I/O module fault (I/O) 1 LED (Red) integrated machine/installation bus fault (CAN ERR) 1 LED (Red) memory card fault (CARD ERR) 1 LED (Red) processor or system fault (ERR)
Product Weight	0.474 lb(US) (0.215 kg)

Schneider XPSMCMCO0000CO Schneider Electric

10,633.00 kr

Only 1 unit left

CANopen diagnostic expansion with screw term

Schneider S985-042 Schneider

0.00 kr

Sold Out

MODBUS PLUS NETWORK ADAPTER

Schneider TSXFPP20 Schneider

3,265.00 kr

Only 5 units left

Main

Characteristic	Value(s)
Range of Product	Modicon Premium Automation platform
Accessory / separate part category	Communication accessories
Accessory / Separate Part Type	PCMCIA card
Accessory / separate part destination	Atrium slot-PLC Premium PLC TSX SCY 21601 module

Complementary

Characteristic	Value(s)
Protective cover	With
Communication Port Protocol	Fipway
Local signalling	1 LED (green) for transmission or reception of data (COM) 1 LED (red) for card fault, link fault (ERR)
Current consumption	330 ÂµA 5 V DC
Product Weight	0.24 lb(US) (0.11 kg)

Schneider TSXCUSBMBP Schneider

36,317.00 kr

Only 7 units left

Main

Characteristic	Value(s)
Range of Product	Harmony XBT
Accessory / separate part category	Communication accessories
Accessory / Separate Part Type	Gateway
Accessory / separate part designation	USB gateway
Accessory / separate part destination	Terminal
Bus type	Modbus Plus

Complementary

Characteristic	Value(s)
Product Compatibility	XBTGK.... XBTGTW... XBTGT....

Schneider TSXMBP100 Schneider

3,034.00 kr

Only 4 units left

Main

Characteristic	Value(s)
Range of Product	Modicon Premium Automation platform
Accessory / separate part category	Communication accessories
Accessory / Separate Part Type	PCMCIA card
Accessory / separate part destination	Magelis XBT F terminals Premium processor TSX 57 1./2./3./4./5. Atrium slot-PLC T PCX/TSX PCI 57 2./3.

Complementary

Characteristic	Value(s)
Memory type	PCMCIA card type III
Communication Port Protocol	Modbus Plus
Current consumption	220 mA 5 V DC
Product Weight	0.24 lb(US) (0.11 kg)

Schneider 170BNO67100 Schneider

7,308.00 kr

Only 2 units left

Main

Characteristic	Value(s)
Range of Product	Modicon Momentum automation platform
Accessory / separate part designation	Branch interface
Accessory / Separate Part Type	Interface
Accessory / separate part category	Connection accessories
Accessory / separate part destination	Interbus communication adaptor
Communication Port Protocol	Interbus generation SUPI 2

Complementary

Characteristic	Value(s)
[Us] rated supply voltage	24 V DC
Output current limits	0.2â¦2 A
Power dissipation in W	2.5 W
Current Consumption	100 mA
Electrical connection	1 RS485 connector RJ45 for incoming remote bus 1 RS485 connector RJ45 for outcoming remote bus 1 terminal block 8
Local signalling	1 LED (green) for remote bus check (RC) for bus active (BA) 1 LED (green) for local remote bus branch disabled (LD) 1 LED (green) for ready for operation (ready) 1 LED (green) for relay output (REL) 1 LED (green) for remote bus branch error (E) 1 LED (red) for remote bus disabled (RD) 1 LED (red)
Product Weight	0.033 lb(US) (0.015 kg)

Schneider ABE7H16R31 Schneider

1,528.00 kr

In stock, 11 units

This product is part of the Modicon ABE7 range, an offer of connection sub bases for Telefast pre-wired system. This passive discrete I/O sub base offers 16 channels and 3 terminals per channel. It is a passive connection sub base with rated supply voltage of 19V to 30V. It is furnished with screw clamp terminals for electrical connection. It is an IP2x rated product. The width of this product is 125mm. It weighs 0.346kg. It is suitable for all types of industrial applications. This product is certified by BV, CSA, DNV, EAC, GL, LROS, UL and GL. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalize wiring in your automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.

Main

Characteristic	Value(s)
Range of Product	Modicon ABE7
Product or Component Type	Passive discrete I/O sub-base
Sub-base type	I/O sub-base
[Us] rated supply voltage	19...30 V IEC 61131-2
Number of channels	16
Number of terminal per channel	3
Connections - terminals	Screw type terminals, 1 x 0.09...1 x 1.5 mmÂ² AWG 28...AWG 16) flexible with cable end Screw type terminals, 1 x 0.14...1 x 2.5 mmÂ² AWG 26...AWG 12) solid Screw type terminals, 1 x 0.14...1 x 2.5 mmÂ² AWG 26...AWG 14) flexible without cable end Screw type terminals, 2 x 0.09...2 x 0.75 mmÂ² AWG 28...AWG 20) flexible with cable end Screw type terminals, 2 x 0.2...2 x 2.5 mmÂ² AWG 24...AWG 14) solid

Complementary

Characteristic	Value(s)
supply voltage type	DC
Number of horizontal rows	3
Status LED	1 LED per channel (Green) channel status 1 LED (Green) power ON
Polarity distribution	0 V or 24 V
Short-circuit protection	2 A internal fuse, 5 x 20 mm, fast blow PLC end)
Connector Type	HE-10
Pin number	20 pins
Fixing mode	By clips (35 mm symmetrical DIN rail) By screws (solid plate with fixing kit)
Maximum supply current	1.8 A
Current per channel	0.5 A
Maximum current per output common	1.8 A
Voltage drop on power supply fuse	0.3 V
[Ui] Rated Insulation Voltage	2000 V
Installation category	II IEC 60664-1
Tightening torque	5.3 lbf.in (0.6 N.m) flat Ã 3.5 mm
Width	4.9 in (125 mm)
Product Weight	0.763 lb(US) (0.346 kg)

Schneider XZCPV1241L2 Schneider

0.00 kr

Sold Out

pre-wired connectors XZ - elbowed female - M12 - 4 pins - cable PVC 2m

Schneider 990NAD23000 Schneider

0.00 kr

Sold Out

Main

Characteristic	Value(s)
Accessory / separate part category	Connection accessories
Accessory / Separate Part Type	Junction box
Accessory / separate part designation	IP20 Modbus Plus junction box with line terminal
Accessory / separate part destination	Modbus Plus network
Additional information	Requires the wiring tools 043509383
Quantity per Set	Set of 1

Complementary

Characteristic	Value(s)
Range Compatibility	Modicon Momentum automation platform Modicon TSX Micro automation platform Modicon Premium automation platform Modicon Quantum automation platform
Communication Port Protocol	Modbus Plus
Product Weight	0.51 lb(US) (0.23 kg)

Schneider 140XTS00209 Schneider

4,726.00 kr

Only 1 unit left

Main

Characteristic	Value(s)
Range of Product	Modicon Quantum automation platform
Accessory / separate part designation	CableFast system cable
Accessory / Separate Part Type	Power cable
Accessory / separate part category	Connection accessories
Accessory / separate part destination	Quantum module

Complementary

Characteristic	Value(s)
Cable length	8.9 ft (2.7 m)
Power type	Standard
Type of Cable	Terminated
Electrical connection	1 connector Quantum I/O 1 connector SUB-D, 50 pins
Color	Black

Schneider 140NOE21110 Schneider

21,039.00 kr

Only 2 units left

Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 5.0 cm Package 1 Width 16.5 cm Package 1 Length 31.0 cm Package 1 Weight 544.0 g Warranty 18 months

Schneider 140XCA71703 Schneider

2,530.00 kr

Only 4 units left

Main

Characteristic	Value(s)
Range of Product	Modicon Quantum automation platform
Accessory / separate part designation	Backplane expander cable
Accessory / Separate Part Type	Cable
Accessory / separate part category	Connection accessories
Accessory / separate part destination	Backplane expander

Complementary

Characteristic	Value(s)
Product Compatibility	140XBE10000
Cable length	3.3 ft (1 m)

Schneider 990NAD21910 Schneider

0.00 kr

Sold Out

Main

Characteristic	Value(s)
Accessory / separate part category	Connection accessories
Accessory / Separate Part Type	Drop connection cable
Accessory / separate part designation	Modbus Plus drop cable
Accessory / separate part destination	Modbus Plus network

Complementary

Characteristic	Value(s)
Product Compatibility	990NAD23000
Range Compatibility	Modicon Momentum automation platform Altivar 71 Altivar 61
Cable length	7.9 ft (2.4 m)
Electrical connection	1 connector SUB-D 9 straight communication module side Flying leads junction box side
Localisation on device	Right side
Product Weight	0.313 lb(US) (0.142 kg)