Contact Displacement Sensors

10,106.00 kr

In stock, 18 units

Specifications

Model		GT2-PA12K
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.1 µm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*1
Measuring force	Downward mounting	1.2 N^*2
	Side mounting	1.15 N^*2
	Upward mounting	1.1 N^*2
Sampling cycle		4 ms
Fluid used		Clean dry air
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67 (IEC)
	Pressure resistance	0.5 MPa
	Applied pressure range	0.24 to 0.26 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT, Spindl: SUS430 (Fluorine coating)
	Contact	SUS304, cemented tungsten carbide^*3
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (excluding cable)^*4
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 This is a representative value at the center of the measuring range when using GT2 with a pressure of 0.25 MPa. The measuring force varies depending on the air pressure used. For details, please refer to the catalog or the user manual. ^3 The contact is included with the sensor. ^4 Including the relay connector.

Keyence GT-71AP Keyence

3,743.00 kr

Only 10 units left

Specifications

Model		GT-71AP
Type		Amplifier unit
Mounting method		DIN rail mount^*1
Output		PNP output
Main unit/expansion unit		Main unit^*2
Power consumption	Normal	At 12 V: 1,140 mW (95 mA) or less, At 24 V: 1,200 mW (50 mA) or less
	Power saving (Eco)	At 12 V: 600 mW (50 mA) or less, At 24 V: 840 mW (35 mA) or less
Display power	Measured value display	6-digit 7-segment LED (red)
	Other displays	2-color 13-level bar LED display (red, green), indicators (red, green)
Display range		-99.999 to 999.999
Display resolution		1 µm 0.000039"
Sampling rate		2,000 times/second
Control input	Timing/preset/bank input	Timing input: Non-voltage input (relay contact, solid state), input time: 2 ms or more Preset/Bank input: Non-voltage input (relay contact, solid state), input time: 20 ms or more
Response time		hsp (1.5 ms) , 5 ms, 10 ms, 100 ms, 500 ms, 1 s, 5 s
HIGH, GO, LOW output		PNP open collector, 50 mA max. (30 V or less), residual voltage: 1 V or less, N.O./N.C. switchable
Major functions		Preset, Hold, Variable hysteresis, Variable response time, Multiplier setting, Bank function (4 banks), Self-timing, Power save (eco) mode, Application mode, Calibration function, Core alarm
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 10 % or less^*3
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: Polycarbonate, Cable: PVC
Accessories		Instruction manual
Weight		Approx. 110 g (including the power cable)
^1 Be sure to mount the DIN rail mounting amplifier on a DIN rail (i.e. the unit should be mounted on the metal DIN plate itself). For additional amplifier unit installation, be sure to use the end unit (OP-26751). ^2 One main unit and nine expansion units (ten in total) can be additionally installed. For additional amplifier unit installation, each output current must be 20 mA or less. ^*3 If additional amplifier units are installed, the power supply voltage is 24 VDC.

Keyence GT2-75N Keyence

5,247.00 kr

In stock, 12 units

Specifications

Model		GT2-75N
Mounting method		Panel mount
Output		NPN output
Main unit/expansion unit		Main unit
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	NPN open collector, 40 V 50 mA or less, residual voltage 1 V or less^1^2
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (GT2-71MCN/71MCP: -10 to +45 °C 14 to 113 °F when expansion unit (s) is connected)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Power supply/I/O cable		12-core connector connection (Connecting cable included)
Weight		Approx. 140 g (including panel mounting bracket, protective front cover and power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT2-100N Keyence

12,169.00 kr

Only 7 units left

Specifications

Model		GT2-100N
Mounting method		Panel mount/Screw mounting using optional mounting bracket
Output		NPN output
Main unit/expansion unit		-
Power supply voltage		20 to 30 VDC, including 10 % ripple (P-P), Class 2
Power consumption	Normal	4,500 mW max. (30 V, 150 mA max.)
	Power saving (Eco)	3,600 mW max. (30 V, 120 mA max.)^*1
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	NPN open collector, 40 V 50 mA or less^*2, residual voltage 1 V or less
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 0.15 mm 0.006", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET
Power supply/I/O cable		Power supply: Terminal block, I/O: 20-pin connector (MIL standard)
Weight		Approx. 380 g
^1 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode. ^2 When 2 or more sensor heads are connected, 20 mA or less.

Keyence GT2-UB1 Keyence

7,705.00 kr

Only 3 units left

Specifications

Model		GT2-UB1
Cable connector		M8 Female
Operating System		Windows 11 Home/Pro/Enterprise (32bit/64bit) Windows 10 Home/Pro/Enterprise (32bit/64bit) One OS must be installed.
USB connector		USB TypeA
USB Communication		USB2.0 Full Speed
Interface		USB-COM
Power supply voltage		USB bus power
Rating	Power consumption	200 mA max.^*1
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main unit: Polycarbonate(PC), Cable: PVC
Weight		Approx. 40 g (including the cable)
^*1 Bus-power-type USB hubs cannot be used.

Keyence GT2CA10M Keyence

5,762.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GT2-CH20M Keyence

4,548.00 kr

Only 1 unit left

Specifications

Model				GT2-CH20M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 straight - e-con
Length				20 m 65.62'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 680 g

Keyence GT-H22 Keyence

5,219.00 kr

In stock, 15 units

Specifications

Model		GT-H22
Type		Sensor head: Standard
Measuring range		22 mm 0.87"
Measuring force	Downward mounting	1.5 N^*1
	Side mounting	1.4 N^*1
	Upward mounting	1.3 N^*1
Mechanical response		8 Hz (at ambient temperature of 23 °C 73 °F)
Repeatability		8 µm 0.00031" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +55 °C 14 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 Stainless steel, Indicator: Polyarylate, Dust boot: NBR, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 135 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range with the response time set to 100 ms.

Keyence GT2-A12 Keyence

8,718.00 kr

In stock, 11 units

Specifications

Model		GT2-A12
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		12 mm 0.47"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*1
Measuring force	Downward mounting	1.2 N^*2
	Side mounting	1.1 N^*2
	Upward mounting	1.0 N^*2
Sampling cycle		1 ms
Fluid used		Dry air
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67^*3
	Pressure resistance	1 MPa
	Applied pressure range	0.25 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: Zinc die-casting; Cylinder part: Aluminium alloy; Air joint resin part: Polyacetal; Air joint metal part: Brass nickel plating; Indicator: Polyarylate
	Dust boot	NBR
	Contact	TYPE304, 440C Stainless steel^*4
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 145 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^3 Make sure the air tube is connected to the air exhaust joint and that no foreign materials enter inside from the joint. ^4 The contact is included with the sensor.

Keyence GT2-72P Keyence

4,090.00 kr

In stock, 12 units

Specifications

Model		GT2-72P
Mounting method		DIN-rail mount
Output		PNP output
Main unit/expansion unit		Expansion unit^*1
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		-
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 140 g (including power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT-72A Keyence

4,090.00 kr

In stock, 11 units

Specifications

Model		GT-72A
Type		Amplifier unit
Mounting method		DIN rail mount^*1
Output		NPN output
Main unit/expansion unit		Expansion unit^*2
Power consumption	Normal	At 12 V: 1,140 mW (95 mA) or less, At 24 V: 1,200 mW (50 mA) or less
	Power saving (Eco)	At 12 V: 600 mW (50 mA) or less, At 24 V: 840 mW (35 mA) or less
Display power	Measured value display	6-digit 7-segment LED (red)
	Other displays	2-color 13-level bar LED display (red, green), indicators (red, green)
Display range		-99.999 to 999.999
Display resolution		1 µm 0.000039"
Sampling rate		2,000 times/second
Control input	Timing/preset/bank input	Timing input: Non-voltage input (relay contact, solid state), input time: 2 ms or more Preset/Bank input: Non-voltage input (relay contact, solid state), input time: 20 ms or more
Response time		hsp (1.5 ms) , 5 ms, 10 ms, 100 ms, 500 ms, 1 s, 5 s
HIGH, GO, LOW output		NPN open collector, 50 mA max. (40 V or less), residual voltage: 1 V or less, N.O./N.C. switchable
Major functions		Preset, Hold, Variable hysteresis, Variable response time, Multiplier setting, Bank function (4 banks), Self-timing, Power save (eco) mode, Application mode, Calibration function, Core alarm
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 10 % or less^*3
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: Polycarbonate, Cable: PVC
Accessories		Instruction manual
Weight		Approx. 110 g (including the power cable)
^1 Be sure to mount the DIN rail mounting amplifier on a DIN rail (i.e. the unit should be mounted on the metal DIN plate itself). For additional amplifier unit installation, be sure to use the end unit (OP-26751). ^2 One main unit and nine expansion units (ten in total) can be additionally installed. For additional amplifier unit installation, each output current must be 20 mA or less. ^*3 If additional amplifier units are installed, the power supply voltage is 24 VDC.

Keyence GT2-P12F Keyence

10,338.00 kr

In stock, 14 units

Specifications

Model		GT2-P12F^*1
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*2
Measuring force	Downward mounting	1.0 N^*3
	Side mounting	0.95 N^*3
	Upward mounting	0.9 N^*3
Sampling cycle		4 ms
Mechanical response		10 Hz^*2
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67G (JIS)^4, IP67 (IEC), NEMA Type 13^4
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Dust boot	NBR
	Contact	SUS304, SUS440C^*5
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 45 g (excluding cable)^*6
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. ^2 Value when the ambient temperature is 20 °C 68 °F. ^3 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^4 When an M8 oil-resistant cable (GT2-CHP2M/CHP5M/CHP10M) is used for the sensor head cable. ^5 The contact is included with the sensor. ^6 Including the relay connector.

Keyence GT2-P12KF Keyence

10,569.00 kr

In stock, 14 units

Specifications

Model		GT2-P12KF^*1
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.1 μm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*2
Measuring force	Downward mounting	1.0 N^*3
	Side mounting	0.95 N^*3
	Upward mounting	0.9 N^*3
Sampling cycle		4 ms
Mechanical response		10 Hz^*2
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67G (JIS)^4, IP67 (IEC), NEMA Type 13^4
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Dust boot	NBR
	Contact	SUS304, cemented tungsten carbide^*5
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 45 g (excluding cable)^*6
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. ^2 Value when the ambient temperature is 20 °C 68 °F. ^3 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^4 When an M8 oil-resistant cable (GT2-CHP2M/CHP5M/CHP10M) is used for the sensor head cable. ^5 The contact is included with the sensor. ^6 Including the relay connector.

Keyence GT2-PA12L Keyence

7,650.00 kr

Only 10 units left

Specifications

Model		GT2-PA12L
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.5 µm 0.02 Mil
Indicated accuracy		2 µm0.08 Mil (P-P)^*1
Measuring force	Downward mounting	0.4 N^*2
	Side mounting	0.35 N^*2
	Upward mounting	0.3 N^*2
Sampling cycle		4 ms
Fluid used		Clean dry air
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Pressure resistance	0.5 MPa
	Applied pressure range	0.05 MPa to 0.07 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Contact	SUS304, SUS440C^*3
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (not including cable)^*4
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. This is a representative value when using the GT2-PA12KL/PA12L with a pressure of 0.06 MPa. The measuring force varies depending on the air pressure used. For details, see table 1.No dust boots are used with the GT2-PA12KL/PA12L. ^3 Contacts are available as options sold separately. ^4 Including the relay connector.

Keyence GT2-550 Keyence

12,901.00 kr

In stock, 15 units

Specifications

Model		GT2-550
Mounting method		DIN-rail mount^*1
Main unit/expansion unit		Expansion unit
Power supply voltage		20 to 30 VDC, including 10 % ripple (P-P) (GT2-550 power supplied from the main unit), Class 2
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Number of expandable units		Maximum of 3 units including the main unit (Maximum of 15 sensor heads)^*2
Rating	Power consumption	4,800 mW, 160.0 mA or less at 30 V
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Materials	Main body	Main body case: polycarbonate, Cable: PVC
Weight		Approx. 95 g
^1 When connecting the DL Series and expansion units, always connect them when the amplifier units is connected to the DIN-rail and use the end unit (OP-26751 included with the DL Series). ^2 When using the DL-RB1A (for communication), ensure that the output cuurents is 10 mA or less.

Keyence GT271MCP Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GT2-CHP2M Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GT2-H1 Keyence

0.00 kr

Sold Out

Specifications

Model				GT2-H1
Operating System				Windows 8.1 Update/Proupdate (32bit/64 bit) Windows 7 Home Basic / Home Premium / Professional / Ultimate (SP1 or better, 32bit/ 64bit) Windows XP Home Edition/Professional (SP3 or better、32bit)One OS must be installed.
Supported languages				Japanese / English / German
CPU				Windows 8.1/ Windows 7: Needs to be compliant with system requirements for OS. Windows XP: Pentium III or better Clock speed 1 GHz or faster
Memory capacity				Windows 8.1/ Windows 7: Needs to be compliant with system requirements for OS. Windows XP: 512 MB or more (1GB or more is recommended)
Available hard disk space				1 GB or more
Display				Resolution 1024 × 768 pixel or higher, display color High Color (16bit) or higher
PC interface				Over USB2.0 or RS-232C(Serial) port
Note				.NET Framework 4.0 or 4.5 needs to be installed ^*1 .
^*1 If .NET Framework is not installed, .NET Framework 4.0 or 4.5 will be installed when GT2-H1 installed.

Keyence GT2-71CN Keyence

5,247.00 kr

In stock, 13 units

Specifications

Model		GT2-71CN
Mounting method		DIN-rail mount
Output		NPN output
Main unit/expansion unit		Main unit
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	NPN open collector, 40 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		-
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (GT2-71MCN/71MCP: -10 to +45 °C 14 to 113 °F when expansion unit (s) is connected)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 70 g
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT2-CA2M Keyence

1,734.00 kr

Only 5 units left

Specifications

Model				GT2-CA2M
Type				Connector type amplifier cable
Applicable product				GT2 Series
Length				2 m 6.56'

Keyence GT-76A Keyence

10,238.00 kr

Only 7 units left

Specifications

Model		GT-76A
Type		Amplifier unit
Mounting method		Panel mount
Output		NPN output
Main unit/expansion unit		Expansion unit^*1
Power consumption	Normal	At 12 V: 1,140 mW (95 mA) or less, At 24 V: 1,200 mW (50 mA) or less
	Power saving (Eco)	At 12 V: 600 mW (50 mA) or less, At 24 V: 840 mW (35 mA) or less
Display power	Measured value display	6-digit 7-segment LED (red)
	Other displays	2-color 13-level bar LED display (red, green), indicators (red, green)
Display range		-99.999 to 999.999
Display resolution		1 µm 0.000039"
Sampling rate		2,000 times/second
Control input	Timing/preset/bank input	Timing input: Non-voltage input (relay contact, solid state), input time: 2 ms or more Preset/Bank input: Non-voltage input (relay contact, solid state), input time: 20 ms or more
Response time		hsp (1.5 ms) , 5 ms, 10 ms, 100 ms, 500 ms, 1 s, 5 s
HIGH, GO, LOW output		NPN open collector, 50 mA max. (40 V or less), residual voltage: 1 V or less, N.O./N.C. switchable
Major functions		Preset, Hold, Variable hysteresis, Variable response time, Multiplier setting, Bank function (4 banks), Self-timing, Power save (eco) mode, Application mode, Calibration function, Core alarm
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 10 % or less^*2
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: Polycarbonate, Cable: PVC
Accessories		Panel mounting bracket, protective front cover, power cable, flat cable for expansion, instruction manual
Weight		Approx. 110 g (: including panel mounting bracket, protective front cover, power cable)
^1 One main unit and nine expansion units (ten in total) can be additionally installed. For additional amplifier unit installation, each output current must be 20 mA or less. ^2 If additional amplifier units are installed, the power supply voltage is 24 VDC.

Keyence GT2-E3N Keyence

0.00 kr

Sold Out

Specifications

Model		GT2-E3N
Mounting method		Installed into GT2-100N/100P (up to 3 boards)
Output		NPN output
Main unit/expansion unit		-
Power supply voltage		Supplied from GT2-100N/100P
Power consumption	Normal	4,200 mW max. (30 V, 140 mA max.)^*1
	Power saving (Eco)	4,000 mW max. (30 V, 133.3 mA max.)
Display power	Measured value display	-
	Other displays
Display range
Display resolution
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	NPN open collector, 40 V 50 mA or less^*2, residual voltage 1 V or less
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET
Power supply/I/O cable		I/O: 30-pin connector (MIL standard)
Weight		Approx. 80 g
^1 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode. ^2 When 2 or more sensor heads are connected, 20 mA or less.

Keyence GT2H12 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GT2-E3P Keyence

7,746.00 kr

Only 6 units left

Specifications

Model		GT2-E3P
Mounting method		Installed into GT2-100N/100P (up to 3 boards)
Output		PNP output
Main unit/expansion unit		-
Power supply voltage		Supplied from GT2-100N/100P
Power consumption	Normal	4,200 mW max. (30 V, 140 mA max.)^*1
	Power saving (Eco)	4,000 mW max. (30 V, 133.3 mA max.)
Display power	Measured value display	-
	Other displays
Display range
Display resolution
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less^*2, residual voltage 1 V or less
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET
Power supply/I/O cable		I/O: 30-pin connector (MIL standard)
Weight		Approx. 80 g
^1 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode. ^2 When 2 or more sensor heads are connected, 20 mA or less.