1 year warranty
Switch actuator REG-K/8x230/6. For independent switching of eight loads via make contacts. With integrated bus coupler and plug-in screw terminals. A green LED indicates readiness for operation after the application has been loaded. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. a data rail is not necessary. KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel. Central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour. Nominal voltage: AC 230 V, 50-60 Hz. For each switching contact: Nominal current: 6 A, cos Phi 0.6. Incandescent lamps: AC 230 V, max. 1380 W. Halogen lamps: AC 230 V, max. 1380 W. Fluorescent lamps: AC 230 V, max. 1000 VA. Capacitive load: AC 230 V, 6 A, max. 105 µF. Device width: 4 modules, approx. 72 mm. Contents: With bus connecting terminal and cable cover. Colour: light grey.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | KNX |
| Product or component type | Switch actuator |
| Bus type | KNX |
| Modular device additional info | Connectable with different phases |
| Number of contacts | 8 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Total number of 18 mm modules | 4 |
| Mounting support | DIN rail |
| [Ue] rated operational voltage | 230 V |
| Network frequency | 50...60 Hz |
| [In] rated current | 6 A |
| Load type | Incandescent lamps: <= 1380 W, 230 V AC Halogen lamps: <= 1380 W, 230 V AC Capacitive: , 6 A, 105 µF, 230 V AC Fluorescent lamps: <= 1000 VA, 230 V AC |
pressure sensor XMLG - 0.8..10 bar - G 1/4A (male) - 24 V - 0..10 V
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
AC Drive, PN: 15.0 kW, IN: 32 A. The ACS880-11 drives are customized to meet the particular needs of specific industries, such as oil and gas, mining, metals, chemicals, cement, power plants, material handling, pulp and paper, sawmills, marine, water and wastewater, food and beverage, and automotive. They can control a wide range of applications, including cranes, extruders, winches, winders, conveyors, mixers, compressors, centrifuges, test benches, elevators, extruders, pumps and fans. The ACS880-11 is a compact and complete regenerative drive solution with everything you need for regenerative operation in cyclic or continuous braking applications.
This Multi9 C60SP is a low voltage miniature circuit breaker (MCB). It is a 3P circuit breaker with 3 protected poles, 8A rated current and B tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 6 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 54mm x (H) 81mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.
Main
| Characteristic | Value(s) |
|---|---|
| Range | Multi9 |
| product name | Multi9 C60 |
| Product or Component Type | Miniature circuit-breaker |
| Device short name | C60SP |
| Device Application | Distribution |
| Poles description | 3P |
| Number of protected poles | 3 |
| Line Rated Current | 8 A 77 °F (25 °C) EN/IEC 60947-2 |
| Network type | AC |
| Trip unit technology | Thermal-magnetic |
| Curve code | B |
| Breaking capacity | 14 kA AIR 240 V AC UL 1077 14 kA AIR 240 V AC CSA C22.2 No 235 10 kA AIR 480Y/277 V AC UL 1077 10 kA AIR 480Y/277 V AC CSA C22.2 No 235 6 kA Icu 440 V AC EN/IEC 60947-2 10 kA Icu 415 V AC EN/IEC 60947-2 20 kA Icu 240 V AC EN/IEC 60947-2 6 kA Icu 440 V AC GB 14048.2 10 kA Icu 415 V AC GB 14048.2 20 kA Icu 240 V AC GB 14048.2 |
| Standards | EN/IEC 60947-2 GB 14048.2 UL 1077 CSA C22.2 No 235 |
| Product certifications | IEC CCC UR CSA |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ue] rated operational voltage | 240 V AC 50/60 Hz 415 V AC 50/60 Hz 440 V AC 50/60 Hz |
| Magnetic tripping limit | 4 x In +/- 20 % AC |
| [Ics] rated service breaking capacity | 4.5 kA 75 % EN/IEC 60947-2 - 440 V AC 7.5 kA 75 % EN/IEC 60947-2 - 415 V AC 15 kA 75 % EN/IEC 60947-2 - 240 V AC 4.5 kA 75 % GB 14048.2 - 440 V AC 7.5 kA 75 % GB 14048.2 - 415 V AC 15 kA 75 % GB 14048.2 - 240 V AC |
| [Ui] rated insulation voltage | 500 V AC EN/IEC 60947-2 |
| [Uimp] rated impulse withstand voltage | 6 kVEN/IEC 60947-2 |
| Suitability for isolation | Yes EN/IEC 60947-2 |
| Contact position indicator | Yes |
| Control Type | Toggle |
| Local signalling | ON/OFF indication |
| Mounting Mode | Clip-on |
| Mounting Support | DIN rail |
| 9 mm pitches | 6 |
| Height | 3.2 in (81 mm) |
| Width | 2.1 in (54 mm) |
| Depth | 2.8 in (72 mm) |
| color | Gray |
| Mechanical durability | 20000 cycles |
| Electrical durability | 10000 cycles |
| Provision for padlocking | Padlockable |
| Connections - terminals | Tunnel type terminal top or bottom) 0.002â¦0.04 in² (1â¦25 mm²) AWG 18...AWG 8) - rigid Tunnel type terminal top or bottom) 0.002â¦0.02 in² (1â¦16 mm²) AWG 18...AWG 8) - flexible with ferrule Tunnel type terminal top or bottom) 0.002â¦0.02 in² (1â¦16 mm²) AWG 18...AWG 8) - flexible |
| Wire stripping length | 0.6 in (14 mm) for top or bottom connection |
| Tightening torque | 22.1 lbf.in (2.5 N.m) top or bottom |
| Earth-leakage protection | Without |
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
compact smart relay Zelio Logic - 12 I O - 24 V DC - clock - display
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon TM7 |
| Product or Component Type | Analog I/O expansion block |
| Range Compatibility | Modicon M258 Modicon LMC058 |
| Enclosure Material | Plastic |
| Bus type | TM7 bus |
| [Ue] rated operational voltage | 24 V DC |
| Input/output number | 4 |
| input/output number of block | 4 I |
Complementary
| Characteristic | Value(s) |
|---|---|
| Analogue input number | 4 |
| Analogue Input Type | Voltage |
| Analogue input range | +/- 10 V |
| Analogue input resolution | 11 bits + sign |
| Sensor power supply | 24 V, 500 mA for all channels overload, short-circuit and reverse polarity protection |
| Electrical connection | 1 male connector M12 - B coding - 4 ways bus IN 1 female connector M12 - B coding - 4 ways bus OUT 4 female connectors M12 - A coding - 5 ways sensor 1 male connector M8 - 4 ways power IN 1 female connector M8 - 4 ways power OUT |
| Local signalling | 2 LEDs for bus diagnostic for sensor/actuator power supply status 2 LEDs |
| Operating position | Any position |
| Fixing Mode | By 2 screws |
| Product Weight | 0.4 lb(US) (0.2 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon TM7 |
| Product or Component Type | Analog I/O expansion block |
| Range Compatibility | Modicon LMC058 Modicon M258 |
| Enclosure Material | Plastic |
| Bus type | TM7 bus |
| [Ue] rated operational voltage | 24 V DC |
| Input/output number | 4 |
| input/output number of block | 4 I |
Complementary
| Characteristic | Value(s) |
|---|---|
| Analogue input number | 4 |
| Analogue Input Type | Current |
| Analogue input range | 0...20 mA |
| Analogue input resolution | 12 bits |
| Sensor power supply | 24 V, 500 mA for all channels overload, short-circuit and reverse polarity protection |
| Electrical connection | 1 male connector M12 - B coding - 4 ways bus IN 1 female connector M12 - B coding - 4 ways bus OUT 4 female connectors M12 - A coding - 5 ways sensor 1 male connector M8 - 4 ways power IN 1 female connector M8 - 4 ways power OUT |
| Local signalling | 2 LEDs for bus diagnostic for sensor/actuator power supply status 2 LEDs |
| Operating position | Any position |
| Fixing Mode | By 2 screws |
| Product Weight | 0.4 lb(US) (0.2 kg) |
analog input module - FS - 2I - thermocouple J/K/N/S/R/C/T - 24 bits