Short-circuit-proof hybrid motor starter for reversing 3~�AC motors up to 550�V�AC, with 24�V�DC input, 9�A output current, emergency stop function, and adjustable overload shutdown. Can only be used with EM-RD adapter, EM-RI adapter or power distribution board.
Industrial ADSL broadband router/modem with RS-232, integrated firewall, NAT and VPN support (IPsec, OpenVPN). The device supports the standards Annex�A, B, and J (ALL-IP connections of Deutsche Telekom). Annex J as of firmware v1.05.4
Configurable temperature transducer with plug-in connection technology for connecting 2, 3, and 4-conductor resistance thermometers and resistance-type sensors. Configurable via DIP switch or software. push-in connection technology, standard configuration
3-way signal conditioner with plug-in connection technology for the electrical isolation of unipolar and bipolar analog signals. Input signal: 0 ... 10 V/�10 V, output signal: 0 ... 10 V/�10 V, screw connection technology
3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 10 V, output signal: 4 ... 20 mA, screw connection technology
Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
3-way repeater power supply with plug-in connection technology. HART-transparent, input signal 0(4)...20 mA, output signal 0(4)...20 mA. The device can be used in both isolator and repeater power supply operation. push-in connection technology
3-way repeater power supply with plug-in connection technology. HART-transparent, input signal 0(4)...20 mA, output signal 0(4)...20 mA. The device can be used in both isolator and repeater power supply operation. Screw connection technology
Two-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Push-in connection technology.
Single-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Push-in connection technology.
Radioline - I/O extension module, 4 digital relay outputs (5�A, 250�V�AC/DC)
Safety relay for emergency stop and safety door up to SIL 1, SIL�CL�1, Cat. 1, PL�c, depending on the application up to SIL�3, SIL�CL�3, Cat. 4, PL�e, single-channel operation, 3 enabling current paths, nominal input voltage of 230 V AC/DC, plug-in spring-cage terminal block
Safety relay for emergency stop and safety door up to SIL 1, SIL�CL�1, Cat. 1, PL�c, depending on the application up to SIL�3, SIL�CL�3, Cat. 4, PL�e, single-channel operation, 3 enabling current paths, nominal input voltage of 230 V AC/DC, plug-in screw terminal blocks
Power contactor, AC-3 95 A, 45 kW / 400 V 220 V AC, 50 / 60 Hz 3-pole, Size S3 screw terminal
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, 1 or 2-channel operation, 3 enabling current paths, nominal input voltage: 230 V AC/DC, plug-in spring-cage terminal block
VARIOFACE module, with screw connection and male D-SUB miniature pin strip, for mounting on NS 35 rails, 37-pos.
Hybrid motor starter for reversing 3~�AC motors up to 500�V�AC and 9�A output current, with 24�V�DC control voltage, adjustable overload shutdown, emergency stop function to SIL�3/PL�e, and screw connection.
PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal block with push-in connection and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 2 PDTs, input voltage 230 V AC/DC
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in technology and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rails, 1 PDT, input voltage: 24VDC
Inline, DALI master, integrated DALI power supply unit, safe electrical isolation, transmission speed in the local bus:�500 kbps, degree of protection:�IP20, including Inline connectors and marking fields
Ethernet switch, 15 TP RJ45 ports, automatic detection of data transmission speed of 10 or 100 Mbps (RJ45), autocrossing function. One FO port in SC format.
Ethernet Lean Managed Switch with four 10/100 Mbps RJ45 ports and two 10/100 Mbps FX-SC multi-mode ports, preconfigured for EtherNet/IP
Ethernet switch, 4 TP RJ45 ports, 1 FO port, 100 Mbps full duplex in ST-D format, automatic detection of data transmission speed of 10 or 100 Mbps (RJ45), autocrossing function