Energy storage device, lead AGM, VRLA technology, 24 V DC, 0.8 Ah.
Redundancy module with function monitoring, 48 V DC, 2x 10 A, 1x 20 A
INPUT 380-460V MOTOR RTG: .37-2.2KW/.5-3HP, CAPACITOR MODULE, EXTERNAL, 380-460VAC, 3PHASE
Energy storage device, lead AGM, VRLA technology, 24 V DC, 3.4 Ah. Connection via pin cable lug, 14 mm.
Monitoring relay for temperature monitoring of the motor winding (maximum 6 PTC) with error memory for temperature sensors in acc. with DIN 44081, test function with integrated test/reset button, supply voltage can be selected using power module, 2 PDTs
Repeater power supply for supplying 2 and 3-conductor transmitters with HART transmission and wide range power supply, SIL, screw connection
Ex i measuring transducer power supply and input signal conditioner, HART-transparent. Transfers supplied or active 0/4�20 mA electrically isolated signals from the Ex area to two loads in the safe area. 4-way electrical isolation, screw connection, SIL, PL
Temperature transducer, converts signals from resistance thermometers and resistors into 0/4 - 20�mA signals. Freely programmable, 3-way electrical isolation.
NAMUR 2-channel signal conditioner for operating proximity sensors and switches. The signals are transferred to the control level using relay outputs (N/O contact). Line fault detection, 3-way electrical isolation, SIL 2, screw connection.
MCR 3-way isolation amplifier, with configurable input/output, for electrical isolation and conversion of analog signals up to 30 V, with screw connection, standard configuration
MCR 4-way signal duplicator for electrical isolation and doubling of analog signals with spring-cage connection, order configuration. Replacement part: 2905027 MINI MCR-2-UI-2UI-PT-C.
Temperature monitoring relay Thermocouple type K, overshoot 1 threshold value, Width 22.5 mm 0 C to 600 C 24 V AC/DC 1 NO + 1 NC, quiescent current principle screw terminal
Measurement and control temperature transducers, resistance thermometers, thermocouples, resistance-type sensors, and voltage sensors. Replacement part: 2908660 MACX MCR-EX-TS-I-OLP.
Input coupler Optocoupler 1 NO contact, Transistor Input 110-230 V AC/DC Output max. 30 V DC, 0.5 A short circuit-proof Overall width 6.2 mm Spring-type terminal (push-in) Thermal current 0.5 A
Input coupler Optocoupler 1 NO contact, Transistor Input 110-230 V AC/DC Output max. 30 V DC, 0.5 A short circuit-proof Overall width 6.2 mm screw terminal Thermal current 0.5 A
MCR feed-in terminal for supplying several MINI Analog modules via a DIN rail connector, with spring-cage connection, maximum current consumption of up to 2A. Replacement part: 2902067 MINI MCR-2-PTB-PT.
Configurable NAMUR switching amplifier for proximity sensors, floating switching contacts and switching contacts with resistance circuit. On the output side 2 N/O contact, with screw connection
MCR repeater power supply with HART transmission, input signal 4...20 mA, output signal 4...20 mA, with screw connection.
Inline analog input terminal, complete with accessories (connector and labeling field), 8 channels, RTD (resistance temperature detector), 2, 3-wire connection method
Inline, Analog output terminal, Analog outputs: 2, 0 V ... 10 V, 0 mA ... 20 mA, 4 mA ... 20 mA, connection method: 2-wire, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields
Inline, Bus coupler, INTERBUS, Inline shield connector, transmission speed in the local bus:�500 kbps, degree of protection:�IP20, including Inline connectors and marking fields
Inline, Block IO, INTERBUS, Inline shield connector, Digital inputs: 16, 24 V DC, connection method: 3-wire, Digital outputs: 16, 24 V DC, 500 mA, connection method: 3-wire, degree of protection: IP20, including Inline connector