Power supply unit, primary switched-mode, input 100 V-240 V AC/ 100 V-370 V DC, output 24 V DC/2.5 A, with filter
Power supply unit, primary switched-mode, input 230 V AC, output 24 V DC/10 A, with filter
power contactor, AC-3 25 A, 11 kW / 400 V 1 NO + 1 NC, AC (50-60 Hz) DC operation 21-28 V AC/DC, 3-pole, Size S0, screw terminal
Power supply unit, primary switched-mode, input 230 V AC, output 24 V DC/10 A
DIN rail power supply unit, primary-switched mode, 1-phase, output: 24 V DC / 10 A, for the potentially explosive area
DIN rail power supply unit, primary-switched mode, 1-phase, output: 24 V DC / 5 A, for the potentially explosive area
Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 10 V DC ... 15 V DC/2 A
Assembled shielded round cable connection 1: Single wires (25-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.) connection 2: D-SUB socket strip (1x 25-position) cable length: 6 m
Measuring transducer repeater power supply and input signal conditioner, HART-transparent. Transmits supplied or active 0/4�20�mA electrically isolated signals from the field to two loads. 4-way electrical isolation, screw connection, SIL, PL.
Programmable Ex-i temperature transducer with analog output and 1 limit value relay, standard configuration, resistance thermometer in 2-, 3-, or 4-wire technology, thermocouples, electrical isolation, wide-range power supply, Push-in connection, SIL, PL.
Ex i measuring transducer power supply and input signal conditioner, HART-transparent. Transfers supplied or active 0/4�20�mA electrical isolation signals from the Ex area to two loads in the safe area. 4-way electrical isolation, Push-in connection, SIL, PL.
Remote field controller with 3 x 10/100 Ethernet, INTERBUS master, PROFINET controller with integrated PROFIsafe safety controller, PROFINET device, IP20 protection, plug-in parameterization memory
Safety digital output module, IP20 degree of protection, for the SafetyBridge-, INTERBUS-Safety- and the PROFIsafe system. It has four safe digital outputs which include one positive and one negative switching output each depending on the parameterization.
Touch panel with 14.5 cm (5.7") graphics-capable TFT display, 320 x 240 pixels, 1 x Ethernet, 2 x USB, and integrated micro browser
IP65-rated industrial panel PC (PPC) or IP20-rated box PC (BPC) with fanless design and Intel processor. Up to 3 GB of RAM. Mass storage options include HDD and SSD formats. Offered with a selection of operating systems. PCI and CompactFlash (CF) expansion slots are available.
17"/43 cm flat panel LCD monitor with resistive touch screen. Includes two rear USB ports and one front USB port
12.1" (30.7 cm) flat panel LCD monitor with resistive touch screen. Includes two rear USB ports.
Plug-in input solid-state relay, with LED and protective circuit in input and output circuits, input: 24 V DC, output: 8 - 48 V DC/max. 100 mA, can be plugged into basic terminal blocks
Output loop-powered process indicator with HART communication for installation in the control cabinet
The output-loop-powered temperature transmitter transmits up to two sensor signals from RTD and TC sensors as well as from resistance-type sensors and voltage sensors via HART communication or 4�...�20�mA, configurable. SIL�2/3, intrinsic safety, Push-in connection.
PLC logic basic logic module, generation�2, with�16 I/Os, for plug-in connection to 8 digital or analog PLC-INTERFACE terminal blocks, can be extended to 48�I/Os, integrated realtime clock, micro USB socket, accommodates memory block and Bluetooth adapter, push-in connection
MACX MCR voltage transducer, for AC voltages from 0 V ... 20 V AC to 0 ... 660 V AC, output signal: 0 V ... 10 V/0(4) ... 20 mA