power contactor, AC-3 32 A, 15 kW / 400 V 4 NO, 24 V DC 4-pole, Size S0 screw terminal 1 NO + 1 NC integrated
Input solid-state relay, with DC voltage output push-pull, transmission frequency: 100 kHz, with light indicator and protective circuit in input and output circuits, input: 5 V DC, output: 14 - 30 V DC/50 mA
Safety relay for two-hand control devices according to EN 574 type IIIC up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, synchronous activation monitoring
Safe coupling relay with force-guided contacts, 5 N/O contacts, 2 N/C contacts, 1-channel, plug-in spring-cage terminal block, width: 22.5 mm
Safety relay for emergency stop and safety door up to SIL 1, SILCL1, Cat. 1, PLc, depending on the application up to SIL3, SILCL3, Cat. 4, PLe, single-channel operation, 4 enabling current paths, US= 24 V AC/DC, plug-in spring-cage terminal block
Electronic reversing load relay, for driving DC motors, with light indicator and protection circuit, output: 10-30 V DC/2 A
VARIOFACE module, with screw connection and D-subminiature socket strip, for assembly on NS 35/7.5, 9 positions
Pluggable replacement miniature relay, 1 N/O contact, input voltage 24 V DC
power contactor, AC-3 40 A, 18.5 kW / 400 V 2 NO + 2 NC, AC / DC 20-33 V, with varistor, 3-pole, Size S2, screw terminal
power contactor, AC-3 40 A, 18.5 kW / 400 V 1 NO + 1 NC, 600 V AC 60 Hz, 3-pole, Size S2, screw terminal
Relay module with plug-in base for KAMMRELAIS size 1, contact: B 104, 2 changeover contacts, input voltage 24-48 V DC, with LED display, freewheeling and polarity protection diode
Power solid-state relay, with LED and protective circuit in input and output circuits, input: 24 V DC, output: 5 - 36 V DC/max. 1 A
Power solid-state relay, with LED and protective circuit in input and output circuits, input: 5 V DC, output: 5 - 36 V DC/ max. 1 A
Power contactor, AC-3 38 A, 18.5 kW / 400 V 2 NO + 2 NC, 24 V DC with plugged-in diode combination, 3-pole Size S0, screw terminals Perm. mounted auxiliary switch for SUVA applications
Setpoint value potentiometer, to set setpoints individually, resistance value 10 k?
POWER SUPPLY 1.3/2.3AMP, 120-240VAC/110-370VDC
Electronic load relay, for direct driving of equipment in the 3-phase network, with light indicator and protection circuit, output: 110-440 V AC/3 x 9 A
Input solid-state relay terminal block, input: 120 V DC, output: 3 - 48 V DC/100 mA, terminal block width: 6.2 mm
DIN rail power supply unit, secondary-switched, input 230 V AC, output 4-13 V DC/250 mA, pre-setting 5 V DC
DIN rail power supply unit, secondary-switched, input 230 V AC, output 12-28 V DC/250 mA, pre-setting 24 V DC
Power supply unit, primary switched-mode, input 3 x 400 V AC, output 24 V DC/20 A
power contactor, AC-3 25 A, 11 kW / 400 V 2 NO + 2 NC, 24 V DC 3-pole, Size S0 Spring-type terminal Captive auxiliary switch for SUVA applications