Heating actuator REG-K/6x230/0.16 A , light grey
KNX Logic module Basic REG-K, light grey
KNX timer REG-K, light grey
Coupler REG-K, light grey
KNX/IP router REG-K, light grey
Main
| Characteristic | Value(s) |
|---|---|
| Range | KNX |
| Product or component type | USB interface |
| Bus type | KNX |
| Market segment | Residential Small commercial |
Complementary
| Characteristic | Value(s) |
|---|---|
| Transmission rate | 9600 bauds |
| Mounting support | Flush |
USB interface REG-K, light grey
The analogue input records and processes analogue sensor signals. Up to four analogue sensors can be connected in any combination. Evaluation and limit value processing is performed in the analogue input. With continuity checking of the 4-20 mA inputs. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. a data rail is not necessary. Auxiliary voltage: AC 24 V (+/-10 %). Analogue inputs: 4. Current interface: 0-20 mA, 4-20 mA. Voltage interface: 0-1 V, 0-10 V. Outputs: DC 24 V, 100 mA. Continuity checking: 4-20 mA. Device width: 4 modules, approx. 72 mm. Contents: With bus connecting terminal and cable cover. Colour: light grey.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | KNX |
| Product or component type | Analogue input |
| Product destination | KNX bus system |
| Bus type | KNX |
Complementary
| Characteristic | Value(s) |
|---|---|
| total number of 18 mm modules | 4 |
| Mounting support | DIN rail |
| Analogue input type | Voltage analog input Current analog input |
| Number of inputs | 4 |
The output channels can be parameterised for different current and voltage signals to control different analogue variables (e.g. servomotors). The actuator has four analogue outputs. With continuity checking of the current outputs. For installation on DIN rails TH35 according to EN 60715. Auxiliary voltage: AC 24 V (+/-10 %). Analogue outputs: 4. Current signals: 0-20 mA, 4-20 mA. Voltage signals: 0-1 V, 0-10 V. Continuity checking: 4-20 mA. Outputs: DC 24 V, 100 mA (total). Device width: 4 modules, approx. 72 mm. Contents: With bus connecting terminal and cable cover. Colour: light grey.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | KNX |
| Product or component type | Analogue actuator module |
| Bus type | KNX |
Complementary
| Characteristic | Value(s) |
|---|---|
| total number of 18 mm modules | 4 |
| Mounting support | DIN rail |
| Number output current | 0...20 mA |
| Output voltage | 0...10 V |
| Number of outputs | 4 |
Weather station REG-K/4-gang, light grey
KNX power supply REG-K/320 mA with emergency power input. For generating the bus voltage for a line with up to 64 bus devices. The emergency power supply REG can be connected in order to buffer the bus voltage. With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. a data rail is not necessary. Nominal voltage: AC 110-230 V ±10%. Operating voltage: min. AC 92 V - max. AC 253 V. Mains frequency: 50-60 Hz ±10%. Output voltage: DC 30 V. Output current: max. 320 mA, short-circuit-proof. Device width: 4 modules, approx. 72 mm. Contents: With bus connecting terminal and cable cover. Colour: light grey.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | KNX |
| Product or component type | Power supply |
| Bus type | KNX |
| Additional information | With integrated choke |
Complementary
| Characteristic | Value(s) |
|---|---|
| total number of 18 mm modules | 4 |
| Mounting support | DIN rail |
| Network frequency | 50...60 Hz |
| Local signalling | LED |
| Input type | Emergency input |
KNX power supply REG-K/640 mA with emergency power input, light grey
REG emergency power supply, light grey
KNX power supply REG-K/320 mA, light grey
KNX power supply REG-K/640 mA. For generating the bus voltage for a line with up to 64 bus devices. With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. a data rail is not necessary. Nominal voltage: AC 110-230 V ±10%. Operating voltage: min. AC 92 V - max. AC 253 V. Mains frequency: 50-60 Hz ±10%. Output voltage: DC 30 V. Output current: max. 640 mA, short-circuit-proof. Device width: 4 modules, approx. 72 mm. Contents: With bus connecting terminal and cable cover. Colour: light grey.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | KNX |
| Product or component type | Power supply |
| Bus type | KNX |
| Additional information | With integrated choke |
| Range | KNX |
| Colour tint | Light grey |
Complementary
| Characteristic | Value(s) |
|---|---|
| total number of 18 mm modules | 4 |
| Mounting support | DIN rail |
| Network frequency | 50...60 Hz |
| Local signalling | LED |
| Main colour tint | Light grey |
Bus connecting terminal, red/dark grey
Branch terminal, yellow/white. Branch terminal comprising two interlocking terminal parts in yellow and white, each with 4 plug-in terminals. For solid conductors with a diameter of 0.6 to 0.8 mm. For wiring the yellow/white cores of the bus cable. Contents: 1 PU: 50 terminals. Colour: yellow/white.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | KNX |
| Product or component type | Connection accessories |
| Bus type | KNX |
KNX Access Control RFID Card reader glass, black
KNX Access Control RFID Card reader glass, white
KNX Access Control RFID Card reader glass, aluminium
KNX Access Control RFID Card holder glass, black
KNX Access Control RFID Card holder glass, white
KNX Access Control RFID Card holder glass, aluminium
KNX Acc.Control RTC glass, black