Polymer fiber cable, duplex 980m/1000m, heavy-weight version for installation in stationary systems and machines, by the meter without male connector
Polymer fiber cable, duplex 980m/1000m, medium-weight version for installation in stationary systems and machines, by the meter without male connector
D-SUB connector, 9-pos. female connector, two cable entries < 35 to one terminal block row, bus system: CAN, CANopen, SafetyBUS p up to 1 Mbps, termination resistor can be switched on via slide switch, pin assignment: 2, 3, 7; screw connection terminal blocks
D-SUB connector, 9-pos. female connector, two cable entries < 35, universal type for all systems, pin assignment: 1, 2, 3, 4, 5, 6, 7, 8, 9 to one screw connection terminal block
Patch panel, one RJ45 socket to 4 screw connection terminal blocks (assignment 1, 2, 3, 6), CAT5e, 10/100 Mbps, DIN rail mounting, IP20, shield contacting on DIN rail
D-SUB connector, 9-pos. female connector, two cable entries < 35, bus system: Modbus, CEGELEC, pin assignment: 1, 1, 2, 3, 6, 7; screw connection terminal blocks
D-SUB connector, 9-pos. female connector, two cable entries < 35, bus system: CAN, KEBA up to 1 Mbps, pin assignment: 2, 3, 4, 5, 6, 7; screw connection terminal blocks
D-SUB connector, 9-pos., male connector, cable entry < 35, bus system: PROFIBUS DP up to 12 Mbps with Pg D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; spring-cage connection terminal blocks
Manual addressing device, for AS-i modules
Inline end cover plate
Accessory set comprising: connectors and Pg screw connections
License for one NetCap master. The NetCap master can be connected to one NetCap slave at once.
License key for using the library with basic functions for the building automation (i.e. to control valves or fans). The software must also be downloaded.
Multiple license key for using all function blocks for PC WORX 3. The software must also be downloaded.
D-SUB connector, 9-pos., male connector, two cable entries < 35, universal type for all systems, pin assignment: 1, 2, 3, 4, 5, 6, 7, 8, 9 to one screw connection terminal block
The space-saving local bus device is particularly suitable for use in close proximity to the process. Functions: 4 digital outputs each with a load capacity of 2 A, channel-specific diagnostics, short-circuit and overload protection, M8 connection method.
Digital input/output module, degree of protection IP20, 4 digital inputs, 24 V DC, COMBICON plugs included
Inline, Branch terminal, for extending the Inline local bus to Inline or Fieldline Modular, transmission speed in the local bus: 500 kbps / 2 Mbps, degree of protection: IP20, including Inline connector and labeling field
INTERBUS fiber optic converter for converting the remote OUT interface to fiber optics, correction of the optical transmission capacity, transmission speed of 2 Mbaud, FO output left
Connector for the copper wire bus and for the power supply with QUICKON connection method
License for one NetCap master. The NetCap master can be connected to three NetCap slaves at once.
License for one NetCap master. The NetCap master can be connected to two NetCap slaves at once.
Connecting cable, for connecting the controller to a PC (RS-232) for PC Worx, 3 m in length
