Power modules, pluggable, for EMD-FL-..., supply voltage: 425...550 V AC
Digital extension module with 2 digital inputs for measuring pulses and frequencies
Antenna cable, outside diameter: 2.5�mm (0.1�in.), inner conductor: stranded, attenuation: 0.9�dB at 900�MHz, connection: 90� MCX (male) -> N (male), cable length: 1.2�m (4�ft.)
Ethernet switch, 4 TP RJ45 ports, 1 FO port, 100 Mbps full duplex in SC-D format, automatic detection of data transmission speed of 10 or 100 Mbps (RJ45), autocrossing function
Antenna cable, outside diameter: 15�mm (0.6�in.), inner conductor: solid, attenuation: 3.9 / 6.8 / 10.4�dB at 0.9 / 2.4 / 5.8�GHz, connection: 2x N (male), cable length: 45�m (150�ft.)
A termination resistor must be screwed on at the end of the leaky wave conductor which does not contain any wireless part. It guarantees an antenna cable termination with the correct impedance and is important for every wireless installation.
Omnidirectional antenna, 2.4GHz, gain: 5dBi, polarization: linear, opening angle: h/v 360/45, degree of protection: IP55, connection: SMA (male)
Adapter to mount SFNT switches on DIN rail in alternative position
Antenna adapter for control cabinet feed-through, frequency range: 0.3GHz...6GHz, connection: 2 x SMA (female)
Antenna adapter, frequency range: 0.3GHz...6GHz, connection: RSMA (male) -> SMA (female)
Antenna cable, outside diameter: 5mm (0.2in.), inner conductor: stranded, attenuation: 1.7 / 3.0 / 4.8dB at 0.9 / 2.4 / 5.8GHz, connection: 2 x SMA (male), cable length: 3m (10ft.)
Fiber optic interface module for connecting 100 Base-FX multi-mode glass fibers (1300 nm), ST, connection direction downward
Inline RS-232 function terminal, for serial data transmission, complete with accessories (connector and labeling field), 1 serial input and output channel in RS-232 design, dedicated process data communication
Inline, Bus coupler, Mechatrolink, USB type A, socket, Digital inputs: 8, 24 V DC, connection method: 3-conductor, Digital outputs: 4, 24 V DC, 500 mA, connection method: 3-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields
Antenna cable, outside diameter: 5mm (0.2in.), inner conductor: stranded, attenuation: 2.8 / 4.9 / 7.8dB at 0.9 / 2.4 / 5.8GHz, connection: 2 x SMA (male), cable length: 5m (16ft.)
INTERBUS fiber optic adapter, for converting the remote IN interface to fiber optics, FO output right, correction of the optical transmission power, 2 MBD
ILC 370 ETH 2TX-IB - 2876999 PHOENIX CONTACT CONTROL LOGIC 12 IN 4 OUT 24V
ILC 350 PN - 2876928 PHOENIX CONTACT CONTROL LOGIC 12 IN 4 OUT 24V
ILC 370 PN 2TX-IB - 2876915 PHOENIX CONTACT CONTROL LOGIC 12 IN 4 OUT 24V
INTERBUS fiber optic adapter, for converting the remote IN interface to fiber optics, FO output left, correction of the optical transmission power, 2 MBD
Timer relay for star/delta startup, supply voltage can be selected using power module, 2 PDTs
Directional antenna, 2.4GHz, gain: 19dBi, polarization: linear, opening angle: h/v 17/11, degree of protection: IP65, connection: N (female), incl. mounting bracket and mast clips
4-way distributor for antenna signals (antenna splitter), connection SMA (female) on the 4 upper ends and SMA (male) on the lower end
Antenna adapter for control cabinet feed-through, frequency range: 0.3GHz...6GHz, degree of protection: IP65, connection: 2 x N (female)