1 year warranty
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Safe coupling relay with force-guided contacts, 3 N/O contacts, 3 N/C contacts, plug-in spring-cage terminal block, width: 22.5 mm
PLC relay, consisting of base terminal block PLC-BSC.../21 with screw connection and pluggable miniature relay with power contact, for assembly on DIN rail NS 35/7.5, 2 PDT, input voltage 24 V DC
Redundancy module, 12 V - 24 V DC, 2 x 20 A, 1 x 40 A
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/40 A
VARIOFACE module, with push-in connections and D-SUB 25 socket connector, for mounting on NS 35 rails
Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket. Contact type: 2 PDTs. Input voltage: 24 V DC
PLC logic extension logic module with 16�I/Os for plug-in connection to 8�PLC-INTERFACE terminal blocks for extending the basic module (a maximum of two extension modules can be connected to a basic module), screw connection
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in connection and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 1 PDT, 24VAC/DC input voltage
Analog /digital module for 2 digital inputs/outputs and 1 analog input/output
Monitoring relay for monitoring phase sequence, phase failure and asymmetry, 342 ... 457 V AC, supply from measurement supply, 2 PDTs
Input Module DIN Rail 9 - 30VDC
Patch panel, two RJ45 sockets, 10/100/1000Mbps, DIN rail mounting, IP20
PROFIBUS DP to PROFIBUS PA coupler
Inline controller, without connecting plug and labeling field. The controller is installed instead of a standard Inline bus coupler. It connects the station to the higher-level INTERBUS network in the same way as a bus coupler.
Uninterruptible energy supply with integrated energy storage, lead AGM, VRLA technology, 24 V DC, 0.8 Ah.
Two-channel zero speed and overspeed safety relay up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, 4 N/O contacts, suitable for connecting incremental encoders and initiators, plug-in screw connection terminal blocks, width: 45 mm
Two-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Screw connection technology.
Touch panel with 10,92 cm / 4,3"-TFT-display (analog resistive (polyester)), 480 x 272 pixel(s) (WQVGA), 16.7 million colors, Arm� Cortex�-A9, 1 GHz, 1x USB Host 2.0, 1 x Ethernet (10/100 Mbps), RJ45, Yocto/Linux and user software: Otter Browser. (bus system: without)
The space-saving local bus device is particularly suitable for use in close proximity to the process. Functions: 2 Mbaud, 8 digital inputs with 3 ms filter time, channel-specific diagnostics, short-circuit/overload protection, 600 mA nominal current, M8 connection method.
Phoenix Contact is a global manufacturer specializing in electrical connection technology, electronic interface systems, industrial automation, and surge protection solutions including programmable logic controllers (PLCs), power supplies, I/O systems, HMI devices, industrial communication products, and DIN rail terminal blocks. PLC Direct supplies Phoenix Contact PLC components, power supply units, and automation hardware supporting existing Phoenix Contact control systems across industrial applications. Our Phoenix Contact collection serves customers sourcing replacement parts, legacy components, and production hardware to maintain operational continuity in installed Phoenix Contact automation environments.
Why Choose Phoenix Contact: Open Automation with PLCnext Technology
Phoenix Contact specializes in open automation platforms, industrial connectivity, and power supply technology alongside programmable logic controllers, providing comprehensive solutions for Industry 4.0 integration and IIoT connectivity. Phoenix Contact PLC systems span compact logic controllers, advanced PLCnext Control platforms with high-level language support, modular I/O systems, power supplies, and interface modules designed for flexible system integration and future-ready automation.
Phoenix Contact automation systems are commonly deployed in:
- Manufacturing automation and machine control
- Energy management and renewable energy systems
- Infrastructure and building automation
- Process industries and chemical manufacturing
- Transportation systems and logistics automation
- Water treatment and environmental monitoring
- Food and beverage processing
- Automotive production and assembly
This broad industrial adoption reflects Phoenix Contact's integration of programmable control, connectivity technology, reliable power distribution, and flexible I/O solutions designed for OEMs, system integrators, and end users requiring scalable automation, open platform integration, and long-term system availability.
Phoenix Contact Products and Solutions
Phoenix Contact organizes its industrial automation portfolio around programmable logic controllers with PLCnext Technology, compact logic controllers, power supplies, I/O systems, HMI devices, industrial communication modules, and connectivity products. The Phoenix Contact collection at PLC Direct focuses on hardware supporting installed Phoenix Contact systems for maintenance, replacement, and lifecycle continuity.
Phoenix Contact Product Families
Phoenix Contact products commonly supported include:
- PLCnext Control AXC F Series: Advanced programmable controllers with AXC F 2152 models featuring ARM Cortex-A9 dual-core processor (2x 800 MHz), 512 MB RAM, 512 MB internal flash memory, two 10/100 Mbps Ethernet ports, SD card slot, USB host and device ports, extended temperature range (-25°C to 60°C), support for up to 63 Axioline F modules, IEC 62443-4-1/-4-2 cybersecurity certification, Linux-based real-time operating system, programming support for IEC 61131-3 (ladder logic, function block, structured text) and high-level languages (C/C++, C#, Python, MATLAB Simulink), protocol support including PROFINET, Modbus TCP/RTU, EtherNet/IP, OPC UA, MQTT for IoT connectivity, PLCnext Engineer software environment for unified development, and cloud connectivity for remote access and monitoring
- PLCnext Control AXC F 3152: High-performance controllers with enhanced processing capability, expanded memory configurations, additional communication interfaces, advanced cybersecurity features, integrated TPM (Trusted Platform Module) for secure credential storage, comprehensive IoT and cloud integration support, and compatibility with all Axioline F I/O modules
- PLC-V8C Series Phoenix Contact Controller: Compact logic controllers including PLC-V8C/PT-24DC/BM2 basic modules (Generation 2, 16 I/Os, expandable to 48 I/Os, real-time clock, micro USB connector, memory module and Bluetooth adapter support), PLC-V8C/PT-24DC/SAM2 stand-alone modules (16 I/Os, non-expandable, suitable for small applications), PLC-V8C/PT-24DC/RS485 communication-enabled models (Modbus/RTU support, 16-48 I/O capability), plug-in connection to PLC-INTERFACE terminal blocks, and IEC 61131-3 programming environment support
- Axioline F I/O System: Block-modular I/O system for control cabinet installation (IP20) including digital input modules (16 inputs, 24 V DC, 1-conductor connection), digital output modules (16 outputs, 24 V DC, 500 mA, 1-conductor connection), analog input modules (8 passive HART inputs, 0-20 mA/4-20 mA), analog output modules with HART functionality, function modules with counter inputs (2 counter inputs, 6 digital inputs, 4 digital outputs), Axioline F backplanes (4-slot and 6-slot configurations for Axioline Smart Elements), 100 Mbps transmission speed in local bus, PROFIsafe and SafetyBridge Technology support for safety applications, and compatibility with all major industrial protocols (PROFINET, EtherNet/IP, Modbus TCP, EtherCAT)
- Axioline Smart Elements: System-independent pluggable I/O modules with 8 or 16 terminal points, 15 mm x 62 mm compact footprint, 1.5 mm² conductor cross section with ferrule and plastic collar, 3.5 mm pitch spacing, Push-in connection technology, digital input modules (16 inputs, 24 V DC), digital output modules (16 outputs, 24 V DC, 500 mA), communication modules (RS-232, RS-485, Modbus/RTU support), safety modules certified to PL e and SIL 3, and universal compatibility with Axioline F backplanes and bus couplers
- Axioline E Field I/O: Distributed I/O devices with IP65/IP67/IP69 protection for harsh environments including EtherNet/IP models (8 digital inputs, 8 digital outputs, M12 connector), PROFINET models (16 digital inputs, 16 digital outputs, metal housing for rugged applications), IO-Link models (Class A and Class B IO-Link ports, 8 DI/8 DO configurations), and direct installation capability in manufacturing environments without control cabinets
- QUINT Power Supplies: Industrial DIN rail power supplies with QUINT-PS/1AC/24DC series (single-phase models: 3.5A, 5A, 10A, 20A, 40A output ratings), QUINT-PS/3AC/24DC series (three-phase models: 5A, 10A, 20A, 40A output ratings), SFB (Selective Fuse Breaking) Technology with 6x nominal current trip threshold for 12ms, POWER BOOST static reserve (up to 1.5x nominal current permanently), preventive function monitoring for early fault detection, adjustable output voltage range (5-56 V DC), wide input voltage range (100-240 V AC single-phase, 320-575 V AC three-phase), high efficiency design with low power dissipation, and narrow slim-line design for control cabinet space savings
- QUINT4 Power Supplies: Fourth-generation power supplies with NFC interface for parameter configuration, adjustable output characteristic curves, individual signaling thresholds, sustained static boost up to 45 A (at 40°C ambient), dynamic boost up to 60 A for 5 seconds, integrated gas-filled surge arrester (up to 6 kV protection), 20 ms minimum mains failure buffer time, analog signal output for continuous monitoring of current/voltage/power, and temperature monitoring capability
- QUINT DC/DC Converters: DC-DC conversion modules including QUINT-PS/24DC/24DC series (input: 24 V DC, output: 24 V DC with various current ratings), SFB technology for selective load protection, wide input voltage range, and galvanic isolation between input and output
- QUINT UPS Systems: Uninterruptible power supplies with integrated battery modules, IQ technology for intelligent energy management, 5A/10A/20A output ratings, 24 V DC input/output, lead AGM VRLA battery technology (1.3Ah, 3.4Ah capacity options), automatic battery detection and communication, and tool-free battery replacement capability
- Inline I/O System: Flexible automation system for control cabinet installation including Inline bus couplers (PROFINET, Modbus/TCP support), Inline digital input terminals (8 inputs, 24 V DC, 1-conductor connection), Inline digital output terminals (8 outputs, 24 V DC, 1-conductor connection), 500 kbps/2 Mbps local bus transmission speed, IP20 protection, compact design with Inline connector system, and compatibility with Inline programmable logic controllers
- Terminal Blocks and Connectivity: DIN rail terminal blocks, pluggable connectors, interface modules, surge protection devices, relay modules, and system cabling solutions for complete automation system integration
Phoenix Contact Products Available on PLC Direct
Phoenix Contact products available through PLC Direct's collection include:
- PLCnext Control CPUs (AXC F 2152, AXC F 3152 models), bus base modules, connector sets
- PLC-V8C series controllers (BM2, SAM2, RS485 variants), expansion modules, PLC-INTERFACE terminal blocks
- Axioline F digital I/O modules (input and output modules), analog modules, function modules
- Axioline Smart Elements (digital, analog, communication, safety modules), backplanes (4-slot, 6-slot)
- Axioline E field I/O devices (PROFINET, EtherNet/IP, IO-Link models), M12 connectors, metal housings
- QUINT power supplies (QUINT-PS/1AC and QUINT-PS/3AC series in various current ratings)
- QUINT4 power supplies with NFC interface, QUINT DC/DC converters, QUINT UPS systems
- UPS battery modules (VRLA, AGM technology, various capacities)
- QUINT redundancy modules with ACB (Auto Current Balancing) Technology
- Inline bus couplers (PROFINET, Modbus TCP), Inline I/O terminals
- Communication modules (PROFINET, EtherNet/IP, Modbus, OPC UA interfaces)
- Programming cables, memory modules, Bluetooth adapters, SD cards
- DIN rail terminal blocks, pluggable connectors, surge protection devices
- System accessories, mounting hardware, and replacement components
These products are sourced for repair, replacement, and lifecycle support of existing Phoenix Contact automation systems.
Lifecycle Support for Phoenix Contact Automation Systems
PLC Direct supports Phoenix Contact industrial automation systems by supplying inventory-backed hardware across multiple stages of the system lifecycle. Our focus centers on helping customers maintain operational continuity within existing Phoenix Contact PLC and control environments.
Lifecycle-focused support includes:
- Phoenix Contact PLC inventory supporting currently deployed PLCnext Control and PLC-V8C series controllers
- Phoenix Contact power supply units including QUINT, QUINT4, and UPS systems in various output ratings
- Components for maintaining earlier Phoenix Contact installations, including legacy controller modules and discontinued I/O systems
- Select discontinued Phoenix Contact parts available based on stock and sourcing capability
- I/O modules, communication interfaces, terminal blocks, and connectivity products in various configurations
Additional support may include:
- Stock-backed availability to support replacement needs
- Assistance with locating difficult-to-source legacy components
- Support with part number identification and compatibility verification
- 1-year warranty coverage on supplied products
PLC Direct supplies Phoenix Contact industrial automation hardware for replacement and maintenance purposes and does not provide system design, programming, or integration services.