1756sc-IF8H Spectrum Controls 1756sc-IF8H ControlLogix Analog Cur/Volt Input w/HART, 8-P
Spectrum Controls 1756sc-IF8u ControlLogix Analog Universal Input Module, (8) Analog Current/Voltage/Resistance/RTD/Thermocouple Inputs, 16-21 Bits (Filter Frequency Dependent), Isolated
ControlLogix Analog Current/Voltage Output Module with full support of HART (Highway Addressable Remote Transducer) Protocol, (8) Analog Current/Voltage Outputs, Isolated
1757-BEM 1757-BEM ProcessLogix Battery Extension Module
ControlLogix 4 H1 / HSE Foundation Fieldbus Linking Device for EtherNet/IP. The 1757-FFLD4 linking device bridges from an Ethernet network to either two or four H1 ports. Each H1 port can support the recommended maximum 8 to 10 devices. Each H1 network can support a maximum of 16 publisher and 16 subscriber VCR connections
ProcessLogix Fieldbus Interface Module, H1 Foundation Fieldbus, 31.25 kbit/s
1757-FIMC5 1757-FIMC5 Fieldbus Interface Cable, 5 meters
ProcessLogix CPU Controller Module; Can be installed into any two consecutive slots of the chassis (default location is slots 1 and 2)
1757 Redundancy Module Cable, 10 Meters, 32.81ft, ST-type fiber-optic Connector
1757-SRC100 1757-SRC100 1757 REDUNDANCY MODULE CABLE, 100 METERS, 328.1FT.
1757-SRC3 1757-SRC3 1757 Redundancy Module Cable, 3m (9.84ft)
1757-SRC50 1757 REDUNDANCY MODULE CABLE - 50 METER, 164 FT
ProcessLogix & ControlLogix System Redundancy Module; Supported Controllers: one 1756-L61, 1756-L62, 1756-L63, 1756-L64 controller; Supported Communication Modules (Maximum Seven modules): 1756-CNB series D or E, 1756-CNBR series D or E, 1756-ENBT, or 1756-EWEB modules
CPU TO CPU CABLE, Point-to-Point Serial Interface Cable, 2m (6.6 ft)
GFX 5 M CPU TO CPU CABLE, Point-to-Point Serial Interface Cable, 5m (16.4 ft)
Pico-Link Cable, 0.3m (1 ft)
Pico-Link Cable 1.5 m
1760-CBL-INT05 PICO-LINK CONNECTIVITY CBL 1.5M 1 PCS/PACK
