This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. This compact I/O expansion block provides 42 input/outputs with sink discrete input logic and source discrete output logic. It is an expansion block with 2 module(s) x 12 digital input with input voltage of 24V DC and 3 module(s) x 6 transistor output with voltage of 24V DC. There is an isolation between 500Vrms AC insulation between channel and bus, no insulation between channels. It is furnished with removable spring terminal block for electrical connection. It is an IP20 rated product. The enclosure is made of white plastic. It weighs 0.37kg. The Modicon TM5 meets the typical requirements of production and packaging machinery, as well as material handling and assembly systems. This product is certified by GOST-R, C-Tick, cULus and CSA. It meets IEC 61131-2, UL 508, CSA C22.2 No 213 and CSA C22.2 No 142 standards. This product is compatible with Modicon LMC058 motion controller and Modicon M258 logic controller. It is installed by mounting on a 35mm DIN rail. This modular IO system provides a flexible and scalable configuration of remote or distributed IO islands by connection with Modicon and PacDrive 3 controllers. Flexible and scalable, designed for complex machines.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon TM5 |
| Product or Component Type | Compact I/O expansion block |
Complementary
| Characteristic | Value(s) |
|---|---|
| Enclosure Material | Plastic |
| Color | White |
| Input/output number | 42 |
| for enclosure nominal dimensions | 24 I + 18 O |
| Number of modules | Digital input 2 x 12 Digital output 3 x 6 |
| Discrete input number | 24 |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
| Input voltage limits | 20.4...28.8 V |
| Discrete input logic | Sink |
| Discrete input current | 3.75 mA |
| Input impedance | 6.4 kOhm |
| Analogue input number | 0 |
| Discrete output number | 18 |
| Discrete output type | Transistor |
| Wiring mode | 1 wire discrete input 2-wire discrete output |
| Output voltage | 24 V DC |
| Output voltage limits | 20.4...28.8 V DC |
| Discrete output logic | Source |
| Discrete output current | 0.5 A per output |
| Peak output current | 9 A |
| Voltage state 0 guaranteed | <= 5 V |
| Voltage state 1 guaranteed | >= 15 V |
| Input filtering | <= 100 ms hardware <= 25 ms configurable by software |
| Response time | <= 300 µs from state 0 to state 1 output <= 300 µs from state 1 to state 0 output |
| Maximum leakage current | 5 µA when switched off) output |
| Isolation | 500 Vrms AC insulation between channel and bus No insulation between channels |
| Maximum voltage drop | <0.3 V at 500 mA output |
| Current consumption | 70 mA 5 V DC bus 140 mA 24 V DC input/output |
| Max current | 9000 mA loads on I/O power segment |
| Maximum power dissipation in W | 3.71 W |
| Local signalling | 5 LEDs (green) for power supply 5 LEDs (red) for power supply 24 LEDs (green) for input status 18 LEDs (yellow) for output status |
| Electrical Connection | Removable spring terminal block |
| Marking | CE |
| Surge withstand | 0.5 kV differential mode 24 V DC IEC 61000-4-5 1 kV common mode 24 V DC IEC 61000-4-5 |
| Electromagnetic compatibility | EN/IEC 61000-4-6 |
| Disturbance radiated/conducted | CISPR 11 |
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator