Description
The EVF9325-EV controller by Lenze is a vector frequency inverter. It is a member of the high-performance motor control 9300 series of inverters, which are utilized in industrial automation applications. It runs the operation with a primary circuit voltage supply of 3 phases of 400 volts AC at 50/60 hertz rated frequency. It has an output voltage range of 0 to 400 volts AC, and with mains choke or filter, it can handle a mains current rate of 15 amps. It supports a mains choke, a separate electromagnetic brake, and filtering interference. Additionally, it contains a 4 pole ASM type motor with a 7.5kW (750 watts) motor power rating. The EVF9325-EV's AC mains connector is a 3 phases 320 volts AC connection. The 45 to 65 hertz mains voltage frequency range is specified to allow flexibility in adjusting to various input frequencies. Alternatively, a DC power supply with a voltage rating of 460 volts DC power or 620 volts DC supply can be used to power the servo inverter. This offers a different power option for particular applications. The EVF9325-EV develops to install on fixing rails, and it comes with four fixing rails for a safe installation. The temperature sensitivity range for the EVF9325-EV is 0 to 40 degrees Celsius. The EVF9325-EV is small, with a width of 139 mm and a height of 350 mm, helping good use of the space. The inverter has a power loss rating of 260 watts, the amount of energy lost as heat while it works.
Technical specifications for EVF9325-EV
| Manufacturer | Lenze |
|---|---|
| Product ID | evf9325-ev |
| Series | 9300 series |
| Type | Vector Frequency Inverter |
| Main circuit voltage input | 400 VAC, 50/60 Hz |
| Voltage type | 3-phase |
| Output voltage | 0-400 VAC |
| DC mains connection option | 460 V, 620 V |
| Mains choke | Supported |
| Motor power rating | 7.5 kW with 4-pole ASM |
| Mains current with choke | 15 amps |
| Weight | 7.8 kg |
| Power loss rating | 260W |
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator