Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Accessory / separate part category | Connection accessories |
| Accessory / Separate Part Type | Removable connector |
| Accessory / separate part destination | Digital I/O module |
| Connector Type | Spring connector |
| Quantity per Set | Set of 2 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Product Compatibility | STBDDO3705 STBDDI3725 |
| Pin number | 18 |
| Product Weight | 0.075 lb(US) (0.034 kg) |
tap-off box - 3 RFID station to Modbus or UNI-TELWAY - M12
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Counter module |
| Electrical Connection | 2 spring terminal blocks |
Complementary
| Characteristic | Value(s) |
|---|---|
| Number of modules | 3 counter modules per TM238 base |
| Discrete input number | 12 EN/IEC 61131-2 type 1 |
| Discrete output number | 4 |
| Application specific I/O | Frequency generator Downcounting Frequency meter Upcounting Period measurement Axis following |
| Counting mode | 8 mode configurable |
| Counter inputs resolution | 31 bits + sign |
| Counting frequency | 60 kHz |
| Cycle time | 1 ms |
| Input compatibility | Incremental signal encoder with 15...30 V source outputs 2 and 3-wire sensors (24 V) |
| Type of cable | Shielded cable |
| Isolation between channels and internal logic | 1500 V for 1 minute |
| Discrete input type | Auxiliary input IN_CAP Auxiliary input IN_EN Auxiliary input IN_REF High-speed IN_A High-speed IN_B High-speed IN_SYNC |
| Discrete input logic | Positive logic (sink) |
| Discrete input voltage | 24 V DC |
| Voltage state 1 guaranteed | 15...30 V |
| Current state 1 guaranteed | 5 mA |
| Voltage state 0 guaranteed | <= 5 V |
| Current state 0 guaranteed | <= 0.5 mA |
| Discrete input current | 2 mA 11 V |
| Discrete output logic | Positive logic (source) |
| Discrete output voltage | 24 V DC 19.2...30 V |
| Discrete output current | 0.5 A |
| Load current | 2 A per module 0.5 A per output |
| Response time on output | <= 200 µs energisation/de-energisation |
| Maximum leakage current | 0.1 mA at state 0 |
| Maximum voltage drop | <3 V at state 1 |
| Short-circuit protection | Automatic reset after disappearance of fault |
| Output overload protection | 0.5...1.5 A trip current with automatic reset after fault disappearance, per o/p |
| Fallback status | Faulty channel set to 0 Each channel held at its last value or set to the predefined value (0 or 1) |
| Load inductance | L = 0.5/I²F |
| Load capacitance | 50 µF |
| Local signalling | 1 display block |
| Current consumption | <= 100 mA 24 V DC internal supply <= 100 mA 5 V DC internal supply <= 2 A 24 V DC external power supply |
| Mounting Support | 35 mm symmetrical DIN rail |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Counter module |
| Electrical Connection | 2 screw terminal blocks |
Complementary
| Characteristic | Value(s) |
|---|---|
| Number of modules | 3 counter modules per TM238 base |
| Discrete input number | 12 EN/IEC 61131-2 type 1 |
| Discrete output number | 4 |
| Application specific I/O | Upcounting Frequency meter Downcounting Axis following Frequency generator Period measurement |
| Counting mode | 8 mode configurable |
| Counter inputs resolution | 31 bits + sign |
| Counting frequency | 60 kHz |
| Cycle time | 1 ms |
| Input compatibility | Incremental signal encoder with 15...30 V source outputs 2 and 3-wire sensors (24 V) |
| Type of cable | Shielded cable |
| Isolation between channels and internal logic | 1500 V for 1 minute |
| Discrete input type | Auxiliary input IN_CAP Auxiliary input IN_EN Auxiliary input IN_REF High-speed IN_A High-speed IN_B High-speed IN_SYNC |
| Discrete input logic | Positive logic (sink) |
| Discrete input voltage | 24 V DC |
| Voltage state 1 guaranteed | 15...30 V |
| Current state 1 guaranteed | 5 mA |
| Voltage state 0 guaranteed | <= 5 V |
| Current state 0 guaranteed | <= 0.5 mA |
| Discrete input current | 2 mA 11 V |
| Discrete output logic | Positive logic (source) |
| Discrete output voltage | 24 V DC 19.2...30 V |
| Discrete output current | 0.5 A |
| Load current | 2 A per module 0.5 A per output |
| Response time on output | <= 200 µs energisation/de-energisation |
| Maximum leakage current | 0.1 mA at state 0 |
| Maximum voltage drop | <3 V at state 1 |
| Short-circuit protection | Automatic reset after disappearance of fault |
| Output overload protection | 0.5...1.5 A trip current with automatic reset after fault disappearance, per o/p |
| Fallback status | Each channel held at its last value or set to the predefined value (0 or 1) Faulty channel set to 0 |
| Load inductance | L = 0.5/I²F |
| Load capacitance | 50 µF |
| Local signalling | 1 display block |
| Current consumption | <= 100 mA 24 V DC internal supply <= 100 mA 5 V DC internal supply <= 2 A 24 V DC external power supply |
| Mounting Support | 35 mm symmetrical DIN rail |
Schneider
TM200RSRCEMC Schneider Electric Modicon M238 logic controller Connection accessory
Sale price0 kr
Sold OutMain
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Accessory / separate part category | Connection accessories |
| Accessory / Separate Part Type | Clamp |
| Accessory / separate part designation | Shielding connection clamp |
| Product Specific Application | Attach and ground the shielding of the cables |
| Quantity per Set | Set of 25 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Number of clamp | 20 5 0.01 in² (7.9 mm²) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Input/output analog module |
| Analogue input number | 2 |
| Input level | Low level |
| Analogue input type | 3-wire Pt probe temperature probe - 100...500 °C differential thermocouple 0...1200 °C thermocouple J differential thermocouple 0...1300 °C thermocouple K differential thermocouple 0...400 °C thermocouple T differential |
| Analogue output number | 1 |
| Analogue output type | Current 4...20 mA Voltage 0...10 V |
| Cross talk | <= 2 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Advantys OTB Twido |
| Analogue input resolution | 12 bits |
| Analogue output resolution | 12 bits |
| LSB value | 2.5 mV voltage voltage 4.8 µA current current 0.1 °C thermocouple 0.15 °C temperature probe |
| Input impedance | >= 1 MOhm |
| Load type | Resistive |
| Load impedance ohmic | >= 2000 Ohm voltage <= 300 Ohm current |
| Stabilisation time | 20 ms |
| Conversion time | 20 ms + 1 controller cycle time |
| Sampling duration | 20 ms temperature probe 60 ms thermocouple |
| Acquisition period | 60 ms per channel + 1 controller cycle time thermocouple 80 ms per channel + 1 controller cycle time |
| Measurement error | +/- 0.2 % of full scale - 100...500 °C 3-wire Pt probe 25 °C +/- 0.2 % of full scale 0...10 V 0...10 V 25 °C +/- 0.2 % of full scale 4...20 mA 4...20 mA 25 °C 0.2 % of full scale +/- 4 °C 0...1200 °C thermocouple J 25 °C 0.2 % of full scale +/- 4 °C 0...1300 °C thermocouple K 25 °C 0.2 % of full scale +/- 4 °C 0...400 °C thermocouple T 25 °C |
| Temperature coefficient | +/-0.006 %FS/°C - 100...500 °C 3-wire Pt probe +/-0.006 %FS/°C 0...1200 °C thermocouple J +/-0.006 %FS/°C 0...1300 °C thermocouple K +/-0.006 %FS/°C 0...400 °C thermocouple T +/-0.015 %FS/°C 0...10 V 0...10 V +/-0.015 %FS/°C 4...20 mA 4...20 mA |
| Repeat accuracy | +/-0.5 %FS input/output |
| Non-linearity | +/- 0.2 %FS current current +/- 0.2 %FS temperature probe +/- 0.2 %FS thermocouple +/- 0.2 %FS voltage voltage |
| Output error | +/- 1 %FS |
| Output ripple | <= 1 LSB |
| Total error | +/-1 %FS current current +/-1 %FS temperature probe +/-1 %FS thermocouple +/-1 %FS voltage voltage |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 50 mA 24 V DC external 50 mA 5 V DC internal |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | I/O expansion module |
| Analogue input number | 2 |
| Input level | High level |
| Analogue input type | current 4...20 mA non differential voltage 0...10 V non differential |
| Cross talk | <= 2 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Analogue input resolution | 12 bits |
| LSB value | 2.5 mV voltage voltage 4.8 µA current current |
| Permissible continuous overload | 40 mA current 13 V voltage |
| Input impedance | >= 1 MOhm voltage 10 Ohm current |
| Sampling duration | 10 ms |
| Acquisition period | 10 ms per channel + 1 controller cycle time |
| Measurement error | +/- 0.2 % of full scale 25 °C |
| Temperature coefficient | +/-0.006 %FS/°C |
| Repeat accuracy | +/-0.5 %FS |
| Non-linearity | +/- 0.2 %FS |
| Total error | +/-1 %FS |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 50 mA 5 V DC internal 40 mA 24 V DC external |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Analog input module |
| Analogue input number | 2 |
| Input level | Low level |
| Analogue input type | thermocouple - 200...760 °C thermocouple J differential thermocouple - 270...1370 °C thermocouple K differential thermocouple - 270...400 °C thermocouple T differential |
| Cross talk | <= 2 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Analogue input resolution | 12 bits |
| LSB value | 0.1 °C thermocouple thermocouple T 0.3 °C thermocouple thermocouple J 0.325 °C thermocouple thermocouple K |
| Permissible continuous overload | +/- 7.5 V thermocouple |
| Input impedance | >= 1 MOhm thermocouple |
| Sampling duration | 200 ms |
| Acquisition period | 200 ms per channel + 1 controller cycle time |
| Measurement error | 0.2 % +/- 5 °C of full scale 25 °C |
| Temperature coefficient | +/-0.006 %FS/°C |
| Repeat accuracy | +/-0.5 %FS |
| Non-linearity | +/- 0.2 %FS |
| Total error | +/-1 %FS |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 30 mA 24 V DC external 60 mA 5 V DC internal |
| Product Weight | 0.187 lb(US) (0.085 kg) |
This analog input module is part of Modicon TM2 expansion modules It consists in 4 analog inputs, voltage 0â¦10 V, current 0â¦20 mA, and temperature probe PT100/PT1000 and is supplied with 24V dc. It is equipped with one removable screw terminal block and can be mounted on a symmetrical DIN rail 35 mm.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | I/O expansion module |
| Analogue input number | 4 |
| Analogue input type | voltage 0...10 V non differential Pt 100/Pt 1000 temperature probe - 200...600 °C non differential Ni 100/Ni 1000 temperature probe - 50...150 °C non differential current 0...20 mA non differential |
| Cross talk | <= 1 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Analogue input resolution | 12 bits |
| LSB value | 2.5 mV voltage voltage 4.8 µA current current 0.2 °C temperature probe Pt 100/Pt 1000 0.05 °C temperature probe Ni 100/Ni 1000 |
| Permissible continuous overload | 40 mA current 13 V voltage |
| Input impedance | >= 10 kOhm temperature probe 470 Ohm current 10 kOhm voltage |
| Sampling duration | 160 ms |
| Acquisition period | 320 ms per channel + 1 controller cycle time temperature probe 160 ms per channel + 1 controller cycle time voltage/current |
| Measurement error | +/- 0.2 % of full scale 0...10 V 0...10 V 25 °C +/- 0.2 % of full scale 4...20 mA 4...20 mA 25 °C +/- 0.4 % of full scale Pt 100/Pt 1000, Ni 100/ Ni 1000 25 °C |
| Temperature coefficient | +/- 0.004 %FS/°C temperature probe +/- 0.009 %FS/°C current +/- 0.009 %FS/°C voltage |
| Repeat accuracy | +/-0.1 %FS |
| Non-linearity | +/- 0.02 %FS |
| Total error | +/-0.5 %FS |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 50 mA 5 V DC internal 60 mA 24 V DC external |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | I/O expansion module |
| Analogue input number | 8 |
| Analogue input type | current 4...20 mA non differential voltage 0...10 V non differential |
| Cross talk | <= 1 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Analogue input resolution | 10 bits |
| LSB value | 19.5 µA current 9.7 mV voltage |
| Permissible continuous overload | 40 mA current 13 V voltage |
| Input impedance | >= 10 kOhm voltage 470 Ohm current |
| Sampling duration | 160 ms |
| Acquisition period | 160 ms per channel + 1 controller cycle time |
| Measurement error | +/- 0.2 % of full scale 25 °C |
| Temperature coefficient | +/-0.01 %FS/°C |
| Repeat accuracy | +/- 0.4 %FS |
| Non-linearity | +/- 0.002 %FS |
| Total error | +/-1 %FS |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Electrical connection | 1 removable screw terminal block power supply 1 removable screw terminal block sensors |
| Current consumption | 45 mA 24 V DC external 60 mA 5 V DC internal |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Input/output analog module |
| Analogue input number | 2 |
| Input level | High level |
| Analogue input type | current 4...20 mA non differential voltage 0...10 V non differential |
| Analogue output number | 1 |
| Analogue output type | Current 4...20 mA Voltage 0...10 V |
| Cross talk | <= 2 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Analogue input resolution | 12 bits |
| Analogue output resolution | 12 bits |
| LSB value | 2.5 mV voltage voltage 4.8 µA current current |
| Permissible continuous overload | 40 mA current 13 V voltage |
| Input impedance | >= 10 Ohm current >= 1 MOhm voltage |
| Load type | Resistive |
| Load impedance ohmic | >= 2000 Ohm voltage <= 300 Ohm current |
| Stabilisation time | 20 ms |
| Conversion time | 20 ms + 1 controller cycle time |
| Sampling duration | 10 ms |
| Acquisition period | 60 ms per channel + 1 controller cycle time |
| Measurement error | +/- 0.2 % of full scale 0...10 V 0...10 V 25 °C +/- 0.2 % of full scale 4...20 mA 4...20 mA 25 °C |
| Temperature coefficient | +/-0.006 %FS/°C 0...10 V +/-0.006 %FS/°C 4...20 mA +/-0.015 %FS/°C 0...10 V 0...10 V +/-0.015 %FS/°C 4...20 mA 4...20 mA |
| Repeat accuracy | +/-0.5 %FS input/output |
| Non-linearity | +/- 0.2 %FS current current +/- 0.2 %FS voltage voltage |
| Output error | +/- 1 %FS |
| Output ripple | <= 1 LSB |
| Total error | +/-1 %FS current current +/-1 %FS voltage voltage |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 50 mA 24 V DC external 50 mA 5 V DC internal |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | I/O expansion module |
| Analogue input number | 4 |
| Input level | High level |
| Analogue input type | current 4...20 mA non differential voltage 0...10 V non differential |
| Analogue output number | 2 |
| Analogue output type | Current 4...20 mA Voltage 0...10 V |
| Cross talk | <= 2 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Analogue input resolution | 12 bits |
| Analogue output resolution | 12 bits |
| LSB value | 2.5 mV voltage voltage 4 µA current current |
| Permissible continuous overload | 40 mA current 13 V voltage |
| Input impedance | >= 1 Ohm voltage <= 250 MOhm current |
| Load type | Resistive |
| Load impedance ohmic | >= 2000 Ohm voltage <= 300 Ohm current |
| Stabilisation time | 20 ms |
| Conversion time | 20 ms + 1 controller cycle time |
| Sampling duration | 16 ms |
| Acquisition period | 16 ms per channel + 1 controller cycle time |
| Measurement error | +/- 0.5 % of full scale 0...10 V 25 °C +/- 0.5 % of full scale 4...20 mA 25 °C +/- 0.9 % of full scale 0...10 V 25 °C +/- 0.9 % of full scale 4...20 mA 25 °C |
| Temperature coefficient | +/- 0.02 %FS/°C 0...10 V +/- 0.02 %FS/°C 4...20 mA +/-0.015 %FS/°C 0...10 V 0...10 V +/-0.015 %FS/°C 4...20 mA 4...20 mA |
| Repeat accuracy | +/- 1 %FS output +/-0.5 %FS input |
| Non-linearity | +/- 0.4 %FS current +/- 0.4 %FS voltage +/- 0.5 %FS current +/- 0.5 %FS voltage |
| Output error | +/- 1 %FS |
| Output ripple | <= 1 LSB |
| Total error | +/- 1.5 %FS current +/- 1.5 %FS voltage +/-1 %FS current current +/-1 %FS voltage voltage |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 60 mA 5 V DC internal 80 mA 24 V DC external |
| Product Weight | 0.187 lb(US) (0.085 kg) |
This analog output module is part of the range Modicon TM2 expansion modules. It consists one analog output, 0V to 10V or 4mA to 20 mA with 12 bits resolution. It is equipped with one removable screw terminal block and can be mounted on a symmetrical DIN rail 35 mm. It is compatible with Modicon OTB interface modules, Magelis HMI controller XBTGC and Modicon / Twido controllers.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Analog output module |
| Analogue output number | 1 |
| Analogue output type | Current 4...20 mA Voltage 0...10 V |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Advantys OTB Twido |
| Analogue output resolution | 12 bits |
| LSB value | 2.5 mV voltage voltage 4.8 µA current current |
| Load type | Resistive |
| Load impedance ohmic | >= 2000 Ohm voltage <= 300 Ohm current |
| Stabilisation time | 10 ms |
| Conversion time | 10 ms + 1 controller cycle time |
| Measurement error | +/- 0.2 % of full scale 25 °C |
| Temperature coefficient | +/-0.015 %FS/°C |
| Repeat accuracy | +/-0.5 %FS |
| Non-linearity | +/- 0.2 %FS |
| Output ripple | <= 1 LSB |
| Total error | +/-1 %FS |
| Type of Cable | Twisted shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 50 mA 5 V DC internal 40 mA 24 V DC external |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Analog input module |
| Analogue input number | 8 |
| Analogue input type | PTC/NTC temperature probe 100...10000 Ohm non differential |
| Cross talk | <= 1 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Advantys OTB Twido |
| Analogue input resolution | 10 bits NTC |
| Input impedance | >= 1 MOhm |
| Sampling duration | 160 ms |
| Acquisition period | 160 ms per channel + 1 controller cycle time |
| Measurement error | +/- 0.2 % of full scale 25 °C |
| Temperature coefficient | +/-0.01 %FS/°C |
| Repeat accuracy | +/- 0.4 %FS |
| Non-linearity | +/- 0.002 %FS |
| Total error | +/-1 %FS |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Electrical connection | 1 removable screw terminal block power supply 1 removable screw terminal block sensors |
| Current consumption | 45 mA 24 V DC external 60 mA 5 V DC internal |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Analog input module |
| Analogue input number | 8 |
| Analogue input type | Pt 100 temperature probe - 200...600 °C non differential Pt 1000 temperature probe - 50...200 °C non differential |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Advantys OTB Twido |
| Analogue input resolution | 12 bits |
| LSB value | 0.006 °C Pt 1000 0.2 °C Pt 100 |
| Input impedance | >= 10 kOhm |
| Sampling duration | 160 ms |
| Acquisition period | 320 ms per group of channel + 1 controller cycle time |
| Measurement error | +/- 0.3 % of full scale Pt 1000 25 °C +/- 0.5 % of full scale Pt 100 25 °C |
| Temperature coefficient | +/-0.01 %FS/°C |
| Repeat accuracy | +/- 0.1 °C |
| Total error | 1 °C Pt 1000 4 °C Pt 100 |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Electrical connection | 1 removable screw terminal block power supply 8 connectors RJ11 sensors |
| Current consumption | <= 140 mA 24 V DC external 90 mA 5 V DC internal |
| Product Weight | 0.42 lb(US) (0.19 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Analog input module |
| Analogue input number | 8 |
| Analogue input type | Pt 100 temperature probe - 200...600 °C non differential Pt 1000 temperature probe - 50...200 °C non differential |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Analogue input resolution | 12 bits |
| LSB value | 0.006 °C Pt 1000 0.2 °C Pt 100 |
| Input impedance | >= 10 kOhm |
| Sampling duration | 160 ms |
| Acquisition period | 320 ms per group of channel + 1 controller cycle time |
| Measurement error | +/- 0.3 % of full scale Pt 1000 25 °C +/- 0.5 % of full scale Pt 100 25 °C |
| Temperature coefficient | +/-0.01 %FS/°C |
| Repeat accuracy | +/- 0.1 °C |
| Total error | 1 °C Pt 1000 4 °C Pt 100 |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Electrical connection | 1 removable screw terminal block power supply 1 removable screw terminal block sensors |
| Current consumption | <= 140 mA 24 V DC external 90 mA 5 V DC internal |
| Product Weight | 0.42 lb(US) (0.19 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Analog output module |
| Analogue output number | 2 |
| Analogue output type | Voltage +/- 10 V |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Advantys OTB Twido |
| Analogue output resolution | 11 bits + sign |
| LSB value | +/- 9.8 mV voltage |
| Load type | Resistive |
| Load impedance ohmic | <= 3000 Ohm voltage |
| Stabilisation time | 2 ms |
| Conversion time | 2 ms + 1 controller cycle time |
| Measurement error | +/- 0.5 % of full scale 25 °C |
| Temperature coefficient | +/-0.01 %FS/°C |
| Repeat accuracy | +/-0.1 %FS |
| Non-linearity | +/- 0.2 %FS |
| Output ripple | <= 1 LSB |
| Total error | +/-1 %FS |
| Type of Cable | Twisted shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 60 mA 5 V DC internal 60 mA 24 V DC external |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Discrete input module |
| Discrete input number | 8 |
| Discrete input voltage | 120 V |
| Discrete input voltage type | AC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Input voltage limits | 85...132 V |
| Discrete input current | 7.5 mA |
| Input impedance | 11 kOhm |
| Number of common point | 1 |
| Response time | 25 ms at state 1 30 ms at state 0 |
| Isolation between channels | None |
| Isolation between channels and internal logic | 1500 V for 1 minute |
| Current consumption | 55 mA 5 V DC at state 1 |
| Local signalling | 1 display block |
| Electrical connection | 1 removable screw terminal block |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Discrete input module, Modicon M238 logic controller, 16 inputs 24 V DC, 1 connector HE10
Discrete input module M238 - 16 inputs 24V DC - 1 removable screw terminal block
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Discrete input module |
| Discrete input number | 32 |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Input voltage limits | 20.4...28.8 V |
| Discrete input logic | Sink or source |
| Discrete input current | 5 mA |
| Input impedance | 4.4 kOhm |
| Number of common point | 2 |
| Response time | 4 ms at state 0 4 ms at state 1 |
| Isolation between channels | None |
| Isolation between channels and internal logic | 500 V for 1 minute |
| Current consumption | 65 mA 5 V DC at state 1 for all input |
| Local signalling | 2 display blocks |
| Electrical connection | 1 connector HE10 |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.179 lb(US) (0.081 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | I/O expansion module |
| Discrete input number | 8 |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Input voltage limits | 20.4...28.8 V |
| Discrete input logic | Sink or source |
| Discrete input current | 7 mA |
| Input impedance | 3.4 kOhm |
| Number of common point | 1 |
| Response time | 4 ms at state 0 4 ms at state 1 |
| Isolation between channels | None |
| Isolation between channels and internal logic | 500 V for 1 minute |
| Current consumption | 25 mA 5 V DC at state 1 for all input |
| Local signalling | 1 display block |
| Electrical connection | 1 removable screw terminal block |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.2 lb(US) (0.1 kg) |
This digital output module is part of the range Modicon TM2 expansion modules. It consists in 16 transistor outputs 24V dc. It is equipped with 1 x HE 10 connector and can be mounted on a symmetrical DIN rail 35 mm. It is compatible with Modicon OTB interface modules, Magelis HMI controller XBTGC and Modicon / Twido controllers .
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Discrete output module |
| Discrete output number | 16 |
| Discrete output type | Transistor |
| Discrete output voltage | 24 V |
| Discrete output logic | Source |
| Discrete output current | 0.4 A |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Output voltage limits | 20.4...28.8 V |
| Current per channel | 0.48 A |
| Maximum current per output common | 2 A |
| Number of common point | 1 |
| Response time | 450 µs from state 0 to state 1 450 µs from state 1 to state 0 |
| [Ures] residual voltage | 1 V at state 1 |
| Maximum leakage current | 0.1 mA |
| Maximum inductive load | 10 mH |
| Maximum tungsten load | 9.6 W |
| Short-circuit protection | With automatic reactivaton |
| Overload protection | With automatic reactivaton |
| Isolation between channels | None |
| Isolation between channels and internal logic | 500 V for 1 minute |
| Current consumption | 15 mA 5 V DC at state 1 for all output 20 mA 24 V DC at state 1 for all output |
| Local signalling | 2 display blocks |
| Electrical connection | 1 connector HE10 |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.15 lb(US) (0.07 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Discrete output module |
| Discrete output number | 16 |
| Discrete output type | Transistor |
| Discrete output voltage | 24 V |
| Discrete output logic | Sink |
| Discrete output current | 0.1 A |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Output voltage limits | 20.4...28.8 V |
| Current per channel | 0.12 A |
| Maximum current per output common | 1 A |
| Number of common point | 1 |
| Response time | 300 µs from state 0 to state 1 300 µs from state 1 to state 0 |
| [Ures] residual voltage | 1 V at state 1 |
| Maximum tungsten load | 8 W |
| Short-circuit protection | Without |
| Overload protection | Without |
| Isolation between channels | None |
| Isolation between channels and internal logic | 500 V for 1 minute |
| Current consumption | 10 mA 5 V DC at state 1 for all output 40 mA 24 V DC at state 1 for all output |
| Local signalling | 2 display blocks |
| Electrical connection | 1 connector HE10 |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.15 lb(US) (0.07 kg) |
Modules