VARIOFACE module, with two equipotential busbars (P1, P2) for potential distribution, for mounting on NS 35 rails. Module width: 97.7 mm
Plug-in industrial relay with power contacts, 2 PDTs, test key, status LED, freewheeling diode, mechanical switch position indicator, polarity: A1+, A2-, input voltage: 60 V DC
VARIOFACE Professional output module with eight channels, each with a pluggable 1 PDT relay and fuse, for 24�V�DC
VARIOFACE Professional digital input module with eight channels, each with a pluggable N/O miniature relay, for 24�V�DC
VARIOFACE interface module for 8 channels
Single or two-channel contact extension for OSSD signals (e.g., light grid), 3 N/O contacts, 1 N/C contact, up to Cat. 4 PL e according to EN ISO 13849, SIL 3 according to EN 62061, plug-in screw terminal blocks, width: 22.5 mm
Plug-in power solid-state relay, with LED and protective circuit in input and output circuits, input: 120 V AC, output: 12 - 60 V DC/max. 3 A, can be plugged into basic terminal blocks
Monitoring relay for monitoring the phase sequence and asymmetry of 3-phase voltages at 208 ... 480 V AC/120 ... 277 V AC, configurable asymmetry, 1 PDT, with push-in connection
Monitoring relay for monitoring 3-phase voltages of 400 V AC 30%, window or window with phase sequence, 1 PDT, with push-in connection
Monitoring relay for monitoring 1-phase voltages of 24 V AC/DC or 230 V AC, undervoltage or window, 1 PDT, with push-in connection
Monitoring relay for monitoring 1-phase voltages of 24 V AC/DC or 230 V AC, undervoltage or window, 1 PDT, with screw connection
VARIOFACE module, with spring-cage terminal blocks and M12-SAC socket, 5-pos.
Monitoring relay for monitoring single-phase currents of 0 ... 5 A AC or 0 ... 10 A AC, overcurrent/undercurrent or window, 1 PDT, with screw connection
Round cable set controller: Mitsubishi Electric MELSEC L, MELSEC Q, Honeywell MasterLogic ML200 connection 1: Fujitsu connector (1x 40-position) connection 2: IDC/FLK socket strip (4x 14-position) cable length: 10 m
Monitoring relay for monitoring the phase sequence and asymmetry of 3-phase voltages at 208 ... 480 V AC/120 ... 277 V AC, configurable asymmetry, 1 PDT, with screw connection
Monitoring relay for monitoring 3-phase voltages of 400 V AC 30%, window or window with phase sequence, 1 PDT, with screw connection
Monitoring relay for monitoring single-phase currents of 0 ... 5 A AC or 0 ... 10 A AC, overcurrent/undercurrent or window, 1 PDT, with push-in connection
Round cable set controller: Mitsubishi Electric MELSEC L, MELSEC Q, Honeywell MasterLogic ML200 connection 1: Fujitsu connector (1x 40-position) connection 2: IDC/FLK socket strip (4x 14-position) cable length: 8 m
Assembled shielded round cable connection 1: Single wires (56-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.) connection 2: EDAC/ELCO socket strip (1x 56-position) cable length: 20 m
Cable set for signal transmission on the Termination Carrier for coupling relays from the PSR-FSP series. Connection of terminal points A1 and A2 (signal transmission) to the signal PCB. Suitable for PSR-SCP-24DC/FSP/1X1/1X2 (Order No. 2981978).
Fuse, number: 10 Pcs., fuse type: Fuse (CC), nominal current: 20 A, tripping characteristic: super-fast blow (gR)
Pre-assembled relay module with screw connection, consisting of: relay base with ejector and power contact relay. Contact type: 1 changeover contact. Input voltage: 12 V DC
Pre-assembled relay module with screw connection, consisting of: relay base with ejector and power contact relay. Contact type: 1 changeover contact. Input voltage: 24 V DC
Pre-assembled relay module with screw connection, consisting of: relay base with ejector and multi-layer gold contact relay. Contact type: 1 changeover contact. Input voltage: 12 V DC