Simatic DP, ELECTRON. Module F. ET200S, 4/8 F-DI PROFISAFE, 24V DC, 30 MM WIDTH UP TO PL e (ISO13849), UP TO SIL3 (IEC 61508), ALSO USEABLE IN PROFINET- NETWORK with IM151-3 HF
Simatic DP, PROFINET Interface Module IM154-4 PN, High Feature FOR ET 200PRO, Integrated Switch, INCLUSIVE TERMINATING MODULE, CONNECTING Module IM PN 6ES7194-4A.00-0AA0 MUST BE ORDERED SEPARATELY
Simatic DP, ET 200M Interface IM 153-4 PN IO FOR MAX. 12 S7-300 Modules, EXTENDED FUNCTIONS: ISOCHRONEOUS REALTIME Communication Class 1 and 2, Module EXCHANGE W/O PG, Operation W/O MMC, MAINTENANCE NEW IO Modules ARE SUPPORTED
SIMATIC ET 200SP, CM PTP communication module for serial connection RS422, RS485 and RS232, Freeport, 3964 (R), USS, MODBUS RTU Master, Slave, 115200 Kbit/s
SIMATIC DP, Electronics module f. ET200S, 4/8 F-DI PROFIsafe, 24 V DC, 30 mm overall width, up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), can also be used in PROFINET configuration with IM 151-3 HF
SIMATIC DP, INTERFACE MODULE IM151-3 PN FO FOR ET 200S 2 PROFINET FO INTERFACES INTEGRATED 2-PORT SWITCH MAX. OF 63 PERIPHERAL MODULES USABLE FOR PROFISAFE MODULES MAX. 2M STATION WIDTH INCL. TERMINATING MODULE
Simatic DP, ELECTRONIC Modules FOR ET200PRO 8 DI DC 24V High Feature, Channel DIAGNOSTICS; SHORT CIRCUIT and WIRE BREAK; INCLUSIVE BUS Module CONNECTING Module IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY
SIMATIC DP, DP MASTER INTERFACE FOR IM 151-7 CPU OR IM 151-8 PN/DP (ET200S), MODULE WITH PROFIBUS DP INTERF. (9 PIN SUB-D, FEMALE) AS DP MASTER
Simatic DP, IM151-8 PN/DP CPU FOR ET200S, 192 KB WORKING Memory, INT. PROFINET Interface (WITH THREE RJ45 PORTS) AS IO-CONTROLER, W/O BATTERY MMC REQUIRED
SIMATIC DP, POWER MODULE PM-E F PROFISAFE, FOR ET 200S; 24V DC USEABLE FOR INSTALLATIONS WITH GROUNDED REFERENCE POTENTIAL RELAIS FOR FAIL-SAFE SWITCHING OF VOLTAGE BUS P2 UP TO CATEGORY 3 (EN954-1)/ SIL 2 (IEC61508) ALSO USEABLE IN PROFINET- NETWORKS WITH IM151-3 HF
Simatic DP, ELECTRONIC Module FOR ET200PRO 4 AI U High Feature, +-10V; 0...10V; +-5V; 1...5V; Channel DIAGNOSTICS; INCLUSIVE BUS Module CONNECTING Module IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY
SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 4XU/I 2-WIRE STANDARD, PACKING UNIT: 10 PIECES, FITS TO BU-TYPE A0, A1, COLOR CODE CC03, MODULE DIAGNOSIS, 16BIT, +/-0,3%
SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature New load group, width: 22.5 mm,
SIMATIC ET 200SP HA, Terminal block, type K0 16 push-in terminals, New load group, width: 22.5 mm,
SIMATIC ET 200SP HA, Terminal block, type M1, 32 push-in terminals, internal reference temperature New load group, width: 45 mm,
SIMATIC DP, POWER MODULE PM-E F PROFISAFE, FOR ET 200S; 24V DC USEABLE FOR INSTALLATIONS WITH UNGROUNDED REFERENCE POTENTIAL RELAIS FOR FAIL-SAFE SWITCHING OF VOLTAGE BUSES P1 AND P2 UP TO CATEGORY 3 (EN954-1)/ SIL2 (IEC61508)/PLD (ISO13849), 2 FAIL-SAFE DIGITAL OUTPUTS UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849), ALSO USEABLE IN PROFINET-NETWORKS W. IM151-3 HF
SIMATIC DP, ELECTRONIC MODULE FOR ET 200S, 1 STEP 5V/204KHZ FOR POSITIONING STEPPER MOTOR 15MM WIDE, SINGLE CHANNEL, +/-5V INTERF. FOR POWER SECTION
FUJI Electric Brand labeled based on SIMATIC DP, interface ET 200M IM 153-2 High-Feature for max. 12 S7-300 modules with redundancy capability, Timestamping suitable for isochronous mode up to 12 modules can be used Slave Initiative for Drive ES and Switch ES Expanded quantity structure for HART auxiliary variables Operation of the 64-channel modules 32 signals / slot
SIMATIC DP, Interface module IM 151-1 Standard for ET 200S; incl. termination module Data volume of 244 bytes each for inputs and outputs; max. 63 I/O modules PROFIBUS DP V0 and V1 up to 2 m width can be connected; Bus connection via 9-pin D-sub
SIMATIC DP, Electronics module f. ET200S, 4 F-DO PROFIsafe, 24 V DC/2 A, 30 mm overall width, up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), can also be used in PROFINET configuration with IM 151-3 HF
SIMATIC DP, ELECTRONIC MODULE ET 200SP, F-AI 4xI(0)4..20mA HF FAILSAFE ANALOG INPUTS up to PL E (ISO 13849) up to SIL 3 (IEC 61508)
Simatic DP, POWER Module PM-E F PROFISAFE, FOR ET 200S; 24V DC USEABLE FOR INSTALLATIONS with GROUNDED REFERENCE POTENTIAL RELAIS FOR FAIL-SAFE Switching OF VOLTAGE BUS P2 UP TO CATEGORY 3 (EN954-1)/ SIL2 (IEC61508)/PLD (ISO13849), ALSO USEABLE IN PROFINET- NETWORKS with IM151-3 HF
SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 4XI 2-/4-WIRE STANDARD, PACKING UNIT: 10 PIECES, FITS TO BU-TYPE A0, A1, COLOR CODE CC03, MODULE DIAGNOSIS, 16BIT, +/-0,3%
SIMATIC DP, ELECTRON. MODULE F. ET200S, 4 F-DO PROFISAFE, DC 24V/2A, 30 MM WIDTH UP TO PL E (ISO13849), UP TO SIL 3 (IEC 61508), ALSO USEABLE IN PROFINET- NETWORKS WITH IM151-3 HF