SIMATIC S7-300,INTERFACE MODULE IM174, FOR CONNECTING ANALOG DRIVES AND STEP DRIVES VIA ISOCHRONUS PROFIBUS TO MOTION CONTROLLERS 4 CHANNELS (4 ENCOD.INP., 4 AO) CONFIGURABLE WITH STEP7 V5.4 SP4
SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 8 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE
SIPLUS S7-300 SM331 20-POLE -25 ... +70øC with conformal coating conformity with EN50155 T1 KAT 1 KL A/B based on 6ES7331-7KF02-0AB0 . ANALOG INPUT GALVANICALLY ISOLATED 8 AI, AUFL. 9/12/14 BIT, U/I/THERMOEL./RESISTOR, ALARM, DIAGNOSTICS, 1 X 20-POLE, REMOVE/INSERT W.ACT. BACKPLANE BUS
SIPLUS S7-300 SM332 40POLE -25...+70°C with conformal coating based on 6ES7332-5HF00-0AB0 . ANALOG OUTPUT OPTICALLY ISOLATED, 8 "AO, U/I; DIAGNOSTICS;" RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS
SIMATIC S7-200, spare part I/O terminal blocks for CPU 221/222/226, EM 223, (4 units with 12 screws each)
SIMATIC DP, ET 200M INTERFACE FOR MAX. 8 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING
SIPLUS S7-300 SM331 MEDIAL STRESS BASED ON 6ES7331-7KF02-0AB0
SIMATIC S7-200 CN analog input EM 231, only for S7-22X CPU, 4 AI, +/-80 MV a. thermocouples Type J, K, S, T, R, E, N; 15 bit+sign this S7-200 CN product only has CE approval
SIPLUS S7-300 SM331 - 20-POLE -25 ... +70 DGR C WITH CONFORMAL COATING BASED ON 6ES7331-7KB02-0AB0 . ANALOG INPUT GALVANICALLY ISOLATED 2 AI, AUFL. 9/12/14 BIT, U/I/THERMOEL./RESISTOR, ALARM, DIAGNOSTICS, 1 X 20-POLE, REMOVE/INSERT W. ACT. BACKPLANE BUS
SIPLUS S7-300 SM 322 8RO 40pol with conformal coating based on 6ES7322-5HF00-0AB0 . Digital output isolated, 8 DO (relay), 1x 40-pole, 24 V DC, 120-230 V AC, 5 A with RC filter overvoltage protection
SIMATIC S7-200, ANALOG I/O EM 235, FOR S7-22X CPU ONLY, 4 AI, DC +/-10V; 1AQ, DC +/-10V 12 BIT CONVERTER
SIMATIC S7-200, EM 253 POSITIONING MODULE, 200 KHZ, FOR CONTROLLING STEPPER OR SERVO DRIVE, OPEN LOOP CONTROL, PROGRAMMING WITH MICRO/WIN
SIMATIC S7-200, ANALOG I/O EM 235, NON-ISOLATATED, 3 AI, AC 0 - 5V O. AC 0 - 10 V, 2-0.5 V, 1AQ, AC +/-10V, 0-20MA FOR S7-21X CPU ONLY
SIMATIC S7-200, PROFIBUS DP SLAVE MODULE, 9.6KB TO 12MB 1 PORT, PROFIBUS DP/MPI FOR CPU222 - CPU 226 WITH NEW FIRMWARE ONLY
SIMATIC S7-200, ANALOG INPUT EM 231, NON - ISOLATED, 3 AI 12 BIT UNIPOLAR, IN RANGES: DC 0-5 V/ DC 0-10 V, 0-20 MA FOR S7-21X CPU ONLY
SIMATIC S7-200, ANALOG OUTPUT EM 232, FOR S7-22X CPU ONLY, 2 AQ, +/- 10V DC, 12 BIT CONVERTER
SIMATIC S7-200, Analog output EM 232, only for S7-22X CPU, 4 AI, +/-10 V DC, 0..20mA 12/11-bit converter
SIMATIC S7-200, ANALOG I/O EM 235, FOR S7-22X CPU ONLY, 4 AI, DC +/-10V; 1AQ, DC +/-10V 12 BIT CONVERTER
SIMATIC S7-200, DIGITAL OUTPUT EM 222, OPTICALLY ISOLATED 8DO, (RELAY OUTPUTS) 2A FOR S7-21X CPU ONLY,
SIMATIC S7-200, ANALOG OUTPUT EM 232, FOR S7-22X CPU ONLY, 2 AQ, +/- 10V DC, 12 BIT CONVERTER
Simatic S7-200, ANALOG Input EM 231, FOR S7-22X CPU ONLY, 4AI, PT100/200/500/1000/10000 NI100/120/1000, CU10, 14 GOST, RESISTANCE 150/300/600 OHM, 15 BIT + SIGN
SIMATIC S7, MEMORY MODULE MC 291, 64 KBYTES, FOR S7-22X CPU (FROM ..23-0XB0) STORAGE OF PLC PROGRAM, DATA LOGGING, RECIPE HANDLING
SIMATIC S7-200, T/C INPUT MOD. EM 231, FOR S7-22X CPU ONLY, 8 AI, +/-80 MV AND THERMOCOUPLE TYPE J,K,S,T,R,E,N; 15BIT+SIGN
SIMATIC S7-200, DIGITAL I/O EM 223, FOR S7-22X CPU ONLY, 32 DI 24 V DC, SINK/SOURCE 32 DO RELAY, 2A/POINT