Sinamics MICROMASTER PX LINE FILTER INPUT 3AC 380-480 V, 50 60 HZ 600 A
SINAMICS/MICROMASTER PX MOTOR INDUCTOR FOR 3-PH 380-480 V, 50/60 HZ, 380 A AC DRIVES/POWER MODULES/ MOTOR MODULES
SINAMICS S110 CONTROL UNIT CU305 PN WITH PROFINET INTERFACE WITHOUT MEMORY CARD
Sinamics BRAKING RESISTOR INPUT 600 V DC OUTPUT 125kW 15S 100KW 20S 4,4 OHM
SINAMICS S110 CONTROL UNIT CU305 DP WITH PROFIBUS INTERFACE WITHOUT MEMORY CARD
SINAMICS/MICROMASTER PX MOTOR INDUCTOR FOR 3-PH 380-480 V, 50/60 HZ, 310 A AC DRIVES/POWER MODULES/ MOTOR MODULES
SIMOVERT P MICRO MASTER SINGLE-PH. 230V 50/60HZ, MM25 RATED OUTPUT 250W
POWER CONNECTOR 6FX2003-0LL12 FOR CONNECTION TO S-1FL6 LI 2-POLES INSULATOR, 2 X SOCKET CONTACT(0.5-0.75MM2) CONTENT 5 PIECE
SIGNAL CABLE PREASSEMBLED 6FX3002-2DB10 FOR ABS. ENCODER IN S-1FL6 HI 3X2X0.22+2X2X0.25 MOTION-CONNECT 300 UL/CSA DMAX=7.8MM LENGTH(M) = 20M
MICROMASTER 4 EMC FILTER 200V-480V 3AC 6A FOOTPRINT FSA - Class B
POWER CABLE PREASSEMBLED 6FX3002-5CK01-1BA0 4X0.75 C, FOR MOTOR S-1FL6 LI WITH V90 230V FS A,B,C,D (1KW) MOTION-CONNECT 300 UL/CSA DMAX=7.1MM LENGTH(M) = 10M
BRAKING RESISTOR FOR MMV37/3 - MMV150/3 900V DC 80W CONTINUOUS 1600W FOR 12 SEC (5% DUTY CYCLE) 400 OHMS
SIMOVERT P MICRO MASTER SINGLE-PH. 230V 50/60HZ, MM55 RATED OUTPUT 550W
SIMOTION Drive-based Control Unit D425-2 DP/PN; programmable motion controller; BASIC performance; interfaces: 12 DI, 16 DI/DO, 4 DRIVE-CLiQ, 2 PROFIBUS, 3 PROFINET ports, 2 ethernet, 2 USB, 1 option slot; incl. dual fan / battery module and battery
SIPLUS PM240-2 -20 bis +50°C (HO) -20 bis +40°C (LO) with conformal coating based on 6SL3210-1PE32-5UL0 . with builtin CL. A FILTER with built in braking chopper 3AC380-480V +10/-20% 47-63HZ OUTPUT HIGH OVERLOAD: 110KW FOR 200% 3S,150% 57S,100% 240S OUTPUT LOW OVERLOAD: 132kW FOR 150% 3S, 110% 57S,100% 240S 708 X 305 X 357 (HXWXD), FSF PROTECTION IP20 WITHOUT CU AND PANEL APPROVED FOR CU FW- VERSION V4.7 HF8 V4.7 HF8
POWER CABLE PREASSEMBLED 6FX3002-5CK01-1CA0 4X0.75 C, FOR MOTOR S-1FL6 LI WITH V90 230V FS A,B,C,D (1KW) MOTION-CONNECT 300 UL/CSA DMAX=7.1MM LENGTH(M) = 20M
SIPLUS PM240-2 -20 to +50 °C (HO) -20 to +40 °C (LO) With conformal coating based on 6SL3210-1PE31-5UL0 . Unfiltered with integrated braking chopper 380-480 V 3 AC +10/-20% 47-63 Hz Power high overload: 55 kW with 200% 3s, 150% 57s, 100% 240S; Power low overload: 75 kW with 150% 3s, "110% 57S, 100% 240s;" 708x 305x 357 (HxWxD), FSF IP20 degree of protection without CU and operating unit released as of CU FW Version V4.7 HF8
POWER CONNECTOR 6FX2003-0SL12 FOR CONNECTION TO S-1FL6 LI 12-POLE INSULATOR 8 X SOCKET CONTACT(0.2-0.25MM2) CONTENT 5 PIECE
Signal cable pre-assembled for incr. encoder in M-1PH1 3x 2x 0.20+2x2X0.25 C MOTION-CONNECT 300 UL/CSA Dmax=7.8 mm Length (m)=15 m
SIPLUS PM240-2 -20 bis +50°C (HO) -20 bis +40°C (LO) with conformal coating based on 6SL3210-1PE26-0UL0 . unfilteded with integrated brake-chopper 3AC380-480V+10/-20% 47-63Hz power high overload: 22kW with 200% 3S, 150% 57S, 100% 240S; power low overload: 30kW with 150% 3S, 110% 57S, 100% 240S; 472 X 200 X 237 (HXWXD), FSD protection IP20 without CU and panel approved for CU FW-Version V4.7 HF8