Redundant Processor, Modicon M580, 64Mb, 61 Ethernet Devices, 31 Remote Io Racks Of X80 And Quantum Io
trip unit Micrologic 2.3 for Compact NSX 630 circuit breakers, electronic, rating 630A, 3 poles 3d
Power Supply module X80 - 24..48 V isolated DC - for severe environments
Unity Hot Standby processor with single mode Ethernet - 3072 kB - 266 MHz
Tool-free wiring using push-in technology Simple wire release using a lever Labeling option for each terminal connection Plain text labeling possible Access for standard test probes Customized coding possible This terminal block is used to wire the X20 SafeIO modules with 12 connections.
20 safe digital inputs 4 pulse outputs Sink circuit Software input filter configurable for each channel This module is equipped with 20 safe digital inputs. It is designed for a nominal voltage of 24 VDC. The module can be used to read various digital signals in safety-related applications up to PL e or SIL 3. The module is equipped with filters that are individually configurable for switch-on and switch-off behavior. The module also provides pulse signals for diagnosing the sensor line. This module is designed for X20 12-pin terminal blocks.
2 safe digital inputs, sink circuit 2 pulse outputs Software input filter configurable for each channel 2 safe relay outputs Output type "Relay" Relay module for 48 VAC / 24 VDC Switching current 6 A Normally open contact Single-channel isolated outputs The module is equipped with 2 safe digital inputs and 2 safe relay outputs. It is designed for a nominal voltage of 24 VDC. The module can be used to read digital signals and for floating control of actuators in safety-related applications up to PL e or SIL 3. The module is equipped with filters that are individually configurable for switch-on and switch-off behavior. The module also provides pulse signals for diagnosing the sensor line. Safety relays are installed in the module. The positively driven feedback contacts are evaluated internally by the module. Safe digital output channels provide protection against automatic restart when network errors occur. This module is designed for X20 12-pin terminal blocks.
Feed for X2X Link and internal I/O supply Electrical isolation of feed and X2X Link supply Redundancy of X2X Link supply possible by operating multiple supply modules simultaneously The supply module is equipped with a feed for the X2X Link as well as the internal I/O supply.
Integrated exchangeable microfuse Monitoring of the fuse Potential for routing as needed The potential distributor module provides 12x 24 VDC (from the internal I/O supply) on the terminal connections and opens up additional wiring possibilities for actuators and sensors. The module is equipped with a replaceable microfuse between the 24 VDC potential on the terminal block and the X20 system I/O supply. The function of the fuse is monitored.
Integrated exchangeable microfuse Monitoring of the fuse Potential for routing as needed The potential distributor module provides 12x ground (from the internal I/O supply) on the terminal connections and opens up additional wiring possibilities for actuators and sensors. The module is equipped with a replaceable microfuse between the GND potential on the terminal block and the X20 system I/O supply. The function of the fuse is monitored.
2x outputs (H bridge) with PWM control and 24 to 39 VDC ±25% supply 3 A nominal current (3.5 A max current) 15 Hz to 50 kHz frequency, 16-bit Frequency mode with 10 to 6553.5 Hz or 1 to 655.35 Hz resolution. PWM resolution, 15-bit + sign, minimum 10 ns Configurable dither 2x 2 inputs 24V, can be configured as AB Sink connection 1-wire connections The motor bridge module is used to control 2 DC motors with a nominal voltage of 24 to 39 VDC ±25% at a nominal current up to 3 A. The module can be reconfigured and used in current controller mode for controlling inductive loads. The module is also equipped with 4 digital inputs, which can be used as incremental counters. Each motor is controlled with a full-bridge (H-bridge). This enables the motors to be moved in both directions.
CAN bus connection Integrated terminating resistor The interface module can be used to expand the X20 CPU for specific applications. It is equipped with a CAN bus interface.
Hub expansion module 2x hub 100 BASE-TX The POWERLINK bus controller X20BC8083 and the stand-alone hubs X20HB8880 and X20HB8815 are equipped with a modular hub expansion. An additional 1 or 2 slots are available, depending on the bus base used. The X20HB2880 hub expansion module can be operated in these slots. The status of the module and network are indicated by LEDs
16 digital outputs Source connection 1-wire connections Integrated output protection The module is equipped with 16 outputs for 1-wire connections. The module is designed for source output wiring.
8 digital outputs Source connection 1-wire connections Integrated output protection The module is equipped with 8 outputs for 1-wire connections and designed for source output wiring.
6 digital outputs Relay module for 115 VAC 6 normally open contacts Single-channel isolated outputs The module is equipped with 6 relay outputs with normally open contacts for 115 VAC. The outputs are single-channel isolated.