COMMUNICATION PROCESSOR CP 5412 (A2) ISA CARD (16 BIT) COMMUNICATIONS PROCESSOR FOR CONNECTION OF A PG/PC TO PROFIBUS
SIMATIC NET, CP 5411 ISA CARD FOR CONNECTING A PG OR AT - PC TO PROFIBUS OR MPI
SIMATIC NET,RS485 REPEATER IP20 FOR PROFIBUS 24 V DC, IP 20 HOUSING, FOR 24 V DC RATED OPERATING VOLTAGE
PROFIBUS OLM/G22 V4.0; Optical Link module with 2 RS485 and 2 glass fiber-optic cable interfaces (4 BFOC sockets) for standard Distances up to 2850 m; with signaling contact and measuring output
PROFIBUS OLM/G12-EEC V4.0 optical link module with 1 RS485 and 2 glass FOC Interfaces (4 BFOC sockets) for extended temperature range -20...+60 °C
PB OLM/P12 V4.01 OPTICAL LINK Module with 1 RS485 and 2 PLASTIC FOC Interface (4 BFOC-SOCKETS, with SIGNAL CONTACT and MEASURING OUTPUT, Version with IMPROVED SIGNAL TO NOISE RATIO Notes For this product a successor is available: 6GK1503-3CA01
PB OLM/P12 V4.1 OPTICAL LINK MODULS W/ 1 RS485 and 2 PLASTIC-FO-INTERFACE (4 BFOC SOCKETS), with SIGNAL. CONTACT and MEASURING OUTPUT
PB OLM/P12 V4.0 OPTICAL LINK Module with 1 RS485 and 2 PLASTIC-FOC-INTERFACE (4 BFOC-SOCKETS), with SIGNAL. CONTACT and MEASURING OUTPUT, Notes For this product a successor is available: 6GK1503-3CA01
SIMATIC NET, PB OLM/G12-EEC OPTICAL LINK MODULE W. 1 RS485 AND 2 GLASS FO INTERFACES (4 BFOC SOCKETS) FOR EXTENDED TEMP. RANGE -20..+ 60 DEGREES
PROFIBUS OLM/P12 V3.1 Optical Link module with 1 RS485 and 2 plastic FOC interfaces (4 BFOC sockets), with signaling Contact and test port, incl. 4 BFOC connectors
SIMATIC NET, OLM/S3 (A2) FOR PROFIBUS OPTICAL LINK MODULE FOR GLASS FIBER OPTIC CABLE 3-CHANNEL VERSION WITH SIGNALING CONTACT
Simatic NET, DP/AS-INTERFACE LINK ADVANCED; GATEWAY PROFIBUS DP/AS-INTERFACE with MASTER PROFILE M3, M4 ACC. TO EXTENDED AS-I SPEC. V3.0 FOR IntegratiON IN PROFIBUS DP; DOUBLE MASTER with Display; DEGREE OF Protection IP20.
IE/PB LINK PN IO Gateway BETWEEN IND. with PROFINET IO FUNCTIONALITY, with PROFINET IO FUNCTIONALITY, S7-ROUTING and DATA BLOCK ROUTING, 10/100 MBIT FAST ETHERNET, 9.6 KBIT/S TO 12 MBITS PROFIBUS Notes Sucessor:Replacement type 6GK1 411-5AB10
Simatic NET, IE/AS-INTERFACE LINK PN IO; GATEWAY Industrial Ethernet/ AS-INTERFACE with MASTER PROFILE M3, M4 ACC. TO EXTENDED AS-I SPEC. V3.0 FOR IntegratiON IN PROFINET IO; SINGLE MASTER with Display; DEGREE OF Protection IP20. CONFIGURATION with STEP 7 TIA Portal IS POSSIBLE ONLY VIA GSD.
SINEC CP 2433 COMMUNICATIONS PROCESSOR FOR CONNECTING SIMATIC S5-90U/-95U/ -100U AND ET200U TO AS-INTERFACE
SINEC CP 2430 COMMUNICATIONS PROCESSOR FOR CONNECTION OF SIMATIC S5-115U/ -135U/-155U TO AS-INTERFACE 2 AS-INTERFACE MASTERS ON 1 MODULE (WITH CONNECTOR)
SINEC CP 2430 COMMUNICATIONS PROCESSOR FOR CONNECTING SIMATIC S5-115U/- 135U/-155U TO AS-INTERFACE 2 AS-INTERFACE MASTERS ON 1 MODULE (INCLUDING CONNECTORS)
SINEC CP 2430 COMMUNICATION PROCESSOR FOR CONNECTING SIMATIC S5-115U/- 135U/-155U TO AS INTERFACE (S1) (INCLUDING CONNECTOR)
Communications processor CP 1616 PCI card (32 bit; 33/66M Hz; 3.3/5 V) with ASIC ERTEC 400 for connection to PROFINET IO with 4-port real-time switch (RJ45) via development kit DK-16XX PN IO; NCM PC
Communications processor CP 1616 PCI card (32 bit; 33/66M Hz; 3.3/5 V) with ASIC ERTEC 400 for connection to PROFINET IO with 4-port real-time switch (RJ45) via development kit DK-16XX PN IO; NCM PC
Communications processor CP 1604 PC/104 plus card (32 bit; 33/66M Hz; 3.3/5 V) with ASIC ERTEC 400 for connection to PROFINET IO with 4-port real-time switch via Development kit DK-16XX PN IO; NCM PC
SINEC CP 1473 MAP COMMUNICATIONS PROCESSOR FOR CONNECTION OF SIMATIC S5 TO INDUSTRIAL ETHERNET WITH MAP 3.0 PROTOCOL