Machine Vision

Showing 865 - 888 of 909 products

Keyence OP-88811 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88810 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88806 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-MSD64G Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-MSD32G Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88808 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88807 Keyence

3,199.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-D1MXE Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-D05MX Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CG-SW100 Keyence

0.00 kr

Sold Out

Specifications

Model		CG-SW100
Ethernet	Number of ports (PoE)	4
	Number of ports (non-PoE)	2
	Connector	M12 X-coded 8-pin female connector
	Standard	1000BASE-T/100BASE-TX/10BASE-Te
	PoE standard	IEEE 802.3af/at (maximum 30 W/port output)
Power supply	Connector	M12 L-coded 5-pin male connector
	Power voltage	24 V DC +25%/-20%
	Rated current consumption (with PoE output)	10.8 A, 207.4 W (at 19.2 V) / 7.6 A, 182.4 W (at 24 V)
	Current consumption (without PoE output)	0.4 A, 8.5 W (at 19.2 V) / 0.4 A, 8.6 W (at 24 V)
Environmental resistance	Enclosure rating	IP67 (IEC 60529)
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)
	Shock resistance	50 G in 6 directions, 3 times each (IEC 60068-2-27)
Size (H×W×D)		176.4 mm × 80.4 mm × 43.4 mm (excluding connector protrusions)
Case temperature		0–70°C ^*1
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Main device case: Aluminum die-casting
Weight		Approx. 750 g
^*1 (Reference value) For 90 W PoE output: 226 mm × 130 mm × 10 mm aluminum plate mounting, ambient temperature 45°C, case temperature 70°C For 120 W PoE output: 296 mm × 200 mm × 10 mm aluminum plate mounting, ambient temperature 45°C, case temperature 70°C

Keyence CG-MU100 Keyence

0.00 kr

Sold Out

Specifications

Model			CG-MU100
Interface	HDMI	Number of ports	1
		Resolution	Up to 1920 (W) × 1080 (H)
	Ethernet	Number of ports	2 (separate networks)
		Connector type	RJ-45
		Standards	1000BASE-T/100BASE-TX/10BASE-T
	USB	Number of ports	3 ^*1
Power supply	Power voltage		DC24V +25%/–20%
	Power consumption		2.3A, 44.2W (at 19.2 V) / 1.9A, 45.6W (at 24 V)
Environmental resistance	Ambient temperature		0 to +45°C (with DIN rail)/0 to +40°C (in vertical and horizontal installations)
	Relative humidity		85°C RH or less (no condensation)
Size (H×W×D)			56.5 mm × 180.0 mm × 161.4 mm
Standard certifications			CE, FCC, NRTL, KC, UKCA
Material			Main casing: Polycarbonate
Weight			Approximately 830 g
^*1 Can be used for touch panel control. Note, however, that operation is not guaranteed with all devices.

Keyence CG-MP120T Keyence

24,616.00 kr

Only 3 units left

Specifications

Model			CG-MP120T
LCD panel	Display element		TFT LCD
	Display colors		Approximately 16 million
	Resolution		1024 (W) × 768 (H)
	Backlight	Life	Approximately 50,000 hours (at room temperature and normal humidity)
	Touch screen	Type	Analog resistive touch screen
		Life	Over one million activations
Interface	Ethernet	Number of ports	2 (separate networks)
		Connector type	RJ-45
		Standards	1000BASE-T/100BASE-TX/10BASE-T
	USB	Number of ports	1 front port, 2 rear ports
Power supply	Power voltage		DC24V +25%/–20%
	Power consumption		2.5A, 48W (at 19.2 V) / 2.0A, 48W (at 24 V)
Environmental resistance	Enclosure rating		Built-in panel; front controls only are dust- and drip-proof with a rating equivalent to IP65f ^*1
	Ambient temperature		0 to +50°C (in vertical installations) ^*2
	Relative humidity		85°C RH or less (no condensation)
Size (H×W×D)			312.3 mm × 245.3 mm × 60.1 mm
Standard certifications			CE, FCC, NRTL, KC, UKCA
Material			Main casing: Polycarbonate Front sheet: PET
Weight			Approximately 2,400 g
^1 Assumes front USB cover is closed. ^2 For information on the rating when the unit is installed in orientations other than the vertical, see “Installation Method” in this manual.

Keyence CG-LC20 Keyence

0.00 kr

Sold Out

Specifications

Model		CG-LC20
Lighting output	Number of channels	1
	Connector	M12 A-coded 5-pin female connector
	Dimming method	Depends on the connected LED lighting
	Gradation	1024-level digital gradation
	Voltage	24 V DC
	Capacity	Maximum 30 W
	Synchronization	Synchronized with trigger or shutter speed to camera/continuous lighting
	Dimming response	Depends on the connected LED lighting
Control interface	Connector	Dedicated 12-pin circular connector
Power source		Supplies power via control interface
Environmental resistance	Enclosure rating	IP67(IEC 60529)
	Ambient temperature	0–50°C (65°C or under for the main device)
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)
	Shock resistance	50 G in 6 directions, 3 times each (IEC 60068-2-27)
Size (H×W×D)		21 mm × 100 mm × 26 mm (excluding cable) Total length 400 mm (including cable)
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Main device: Polyamide
Weight		Approx. 110 g

Keyence CG-LC100 Keyence

0.00 kr

Sold Out

Specifications

Model		CG-LC100
Output	Number of channels	2
	Connector	M12 A-coded 4-pin female connector
	Dimming method	1. Constant voltage control method (DC lighting, with linearization function) 2. Pulse width modulation method (emission frequency 100 kHz)
	Gradation	1024-level digital gradation
	Voltage	12 V DC/24 V DC (switch)
	Capacity	Maximum 30 W (total 60 W for 2 channels)
	Synchronization	Ethernet synchronization/FLASH input synchronization/continuous lighting
	Dimming response	1. Constant voltage control method: within 3 ms 2. Pulse width modulation method: within 1 ms
External signal	Connector	M12 A-coded 8-pin female connector
	FLASH input	2 (isolated)
	Lighting forced off input
	Power source output (for auxiliary use)	24 V DC 100 mA
Ethernet	Number of ports	2
	Connector	M12 8-pin X-coded female connector
	Standard	1000BASE-T/100BASE-TX/10BASE-Te
Power supply	Connector	M12 L-coded 5-pin male connector
	Power voltage	24 V DC +25%/-20%
	Power consumption	4.4 A, 84.5W (at 19.2 V)/3.4 A, 81.6W (at 24 V)
Environmental resistance	Enclosure rating	IP67 (IEC 60529)
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)
	Shock resistance	50 G in 6 directions, 3 times each (IEC 60068-2-27)
Size (H×W×D)		176.4 × 75.4 × 40.4 (excluding connector protrusions and Control dials)(unit: mm)
Case temperature		0–70°C ^*1
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Main device case: (top) PC, (bottom) aluminum die-casting
Weight		Approx. 500 g
^*1 (Reference value) 226 mm × 125 mm × 10 mm Aluminum plate mounting, ambient temperature 50°C, case surface temperature 70°C

Keyence CG-LC10 Keyence

0.00 kr

Sold Out

Specifications

Model		CG-LC10
Lighting output	Number of channels	1
	Connector	M12 A-coded 4-pin female connector
	Dimming method	1. Constant voltage control method (DC lighting, with linearization function) 2. Pulse width modulation method (emission frequency 100 kHz)
	Gradation	1024-level digital gradation
	Voltage	12 V DC
	Capacity	During 24 V DC power supply: Maximum 30 W ^1 During PoE power supply: Maximum 10 W ^2
	Synchronization	Synchronized with trigger or shutter speed to camera/continuous lighting
	Dimming response	1. Constant voltage control method: within 3 ms 2. Pulse width modulation method: within 1 ms
Control interface	Connector	Dedicated 12-pin circular connector
Power source		Supplies power via control interface
Environmental resistance	Enclosure rating	IP67(IEC 60529)
	Ambient temperature	0–50°C (65°C or under for the main device)
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)
	Shock resistance	50 G in 6 directions, 3 times each (IEC 60068-2-27)
Size (H×W×D)		21 mm × 100 mm × 26 mm (excluding cable) Total length 400 mm (including cable)
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Main device: Polyamide
Weight		Approx. 110 g
^1 During continuous lighting: 15 W ^2 The maximum value varies depending on the power supply method of the Vision system to which the device is connected.

Keyence CA-DEW10X Keyence

29,669.00 kr

Only 2 units left

Specifications

Model		CA-DEW10X
Light source	Color	White
Control interface	Connector	Dedicated 12-pin circular connector
Power source		Supplies power via control interface
Environmental resistance	Enclosure rating	IP67 (IEC 60529)
	Ambient temperature	0–40°C
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)
	Shock resistance	50 G in 6 directions, 3 times each (IEC 60068-2-27)
Size (H×W×D)		116 mm × 116 mm × 53 mm
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Main device case: Magnesium die-casting Front cover: Polycarbonate, acrylic ^*1
Weight		Approx. 390 g
^*1 ESD-safe and IEC 61340-5-1-compliant when used with the OP-88808 (protective attachment for high-intensity smart ring lighting).

Keyence CA-DER10X Keyence

0.00 kr

Sold Out

Specifications

Model		CA-DER10X
Light source	Color	Red
Control interface	Connector	Dedicated 12-pin circular connector
Power source		Supplies power via control interface
Environmental resistance	Enclosure rating	IP67 (IEC 60529)
	Ambient temperature	0–40°C
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)
	Shock resistance	50 G in 6 directions, 3 times each (IEC 60068-2-27)
Size (H×W×D)		116 mm × 116 mm × 53 mm
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Main device case: Magnesium die-casting Front cover: Polycarbonate, acrylic ^*1
Weight		Approx. 390 g
^*1 ESD-safe and IEC 61340-5-1-compliant when used with the OP-88808 (protective attachment for high-intensity smart ring lighting).

Keyence CA-DEIR10X Keyence

0.00 kr

Sold Out

Specifications

Model		CA-DEIR10X
Light source	Color	Near infrared (850 nm)
Control interface	Connector	Dedicated 12-pin circular connector
Power source		Supplies power via control interface
Environmental resistance	Enclosure rating	IP67 (IEC 60529)
	Ambient temperature	0–40°C
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)
	Shock resistance	50 G in 6 directions, 3 times each (IEC 60068-2-27)
Size (H×W×D)		116 mm × 116 mm × 53 mm
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Main device case: Magnesium die-casting Front cover: Polycarbonate, acrylic ^*1
Weight		Approx. 390 g
^*1 ESD-safe and IEC 61340-5-1-compliant when used with the OP-88808 (protective attachment for high-intensity smart ring lighting).

Keyence CA-DEB10X Keyence

0.00 kr

Sold Out

Specifications

Model		CA-DEB10X
Light source	Color	Blue
Control interface	Connector	Dedicated 12-pin circular connector
Power source		Supplies power via control interface
Environmental resistance	Enclosure rating	IP67 (IEC 60529)
	Ambient temperature	0–40°C
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)
	Shock resistance	50 G in 6 directions, 3 times each (IEC 60068-2-27)
Size (H×W×D)		116 mm × 116 mm × 53 mm
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Main device case: Magnesium die-casting Front cover: Polycarbonate, acrylic ^*1
Weight		Approx. 390 g
^*1 ESD-safe and IEC 61340-5-1-compliant when used with the OP-88808 (protective attachment for high-intensity smart ring lighting).

Keyence VS-S500MX Keyence

0.00 kr

Sold Out

Specifications

Model		VS-S500MX
Storage	Internal storage	7 GB
	microSD card (external)	Max. 64 GB ^*1
Image sensor	Frame rate	81 fps
Lens	Mount	Lens-integrated type
	Max. optical magnification	× 2.0
	Installation distance	50 mm to 500 mm 1.97" to 19.69" ^*2
	Field of view	27 mm to 417 mm 1.06" to 16.42"
I/O connection	Number of inputs	1 (insulated)
	Number of outputs	3 (insulated)
	Number of inputs/outputs	2 (insulated) (input and output switched via settings)
I/F	Ethernet	PoE IEEE 802.3at, M12 X cable × 1
	I/O	1 In/3 Out/2 In, Out M12 A cable × 1
	Lighting interface	Dedicated lighting connection interface × 1
	External media	microSD card slot × 1 (UHS-1)
Functions	Imaging mode	1.6 M 3.2 M 5 M
	Output image pixels	(5 M mode) 2544×1904 1904×2544 2224×2224 2976×1664 1664×2976 3824×1280 1280×3824
	Exposure time	0.033 msec to 1000 msec
	Image correction functions	Gain, Offset, Gamma correction, White balance, Fine HDR
	Indicators	OLED display, Status LED, Ethernet LED (LINK/ACT), SD card access indicator
	Buttons	Operation buttons × 3
	Installation support functions	Pointer (Class 1 laser product ^*3), Angle monitor
Power supply	Power voltage	24 V +25%/−20% or PoE (IEEE802.3at Power Class 4)
	Current consumption (camera only)	0.97 A, 18.7 W (for 19.2 V)/0.78 A, 18.7 W (for 24 V)
	Current consumption (including lighting)	4.7 A, 89.7 W (for 19.2 V)/3.8 A, 89.7 W (for 24 V)
	Current consumption (With CA-DEx10X connected)	11.3 A, 216.7 W (for 19.2 V)/9.1 A, 216.7 W (for 24 V) ^*4
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Relative humidity	85% RH or below (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC60068-2-64)
	Shock resistance	50 G, 3 times in each of the 6 directions (IEC60068-2-27)
Size (H×W×D)		122.3 mm × 52.6 mm × 69.2 mm 4.81" × 2.07" × 2.72"
Case temperature		0°C to 65°C 32 to 149°F ^*5
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Case: Aluminum die-casting, Front cover: Glass ^*6
Weight		Approx. 570 g 20.12 oz
^1 Using the configuration software, format the media before use. ^2 VS-LxxxMX/CX’s field-of-view measuring range is 150 mm to 3000 mm 5.91" to 118.11". VS-SxxxMX/CX’s field-of-view measuring range is 50 mm to 500 mm 1.97" to 19.69". ^3 FDA (CDRH) Part 1040.10 (The laser classification is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice), IEC60825-1. ^4 Maximum instantaneous current. Average current is below current consumption (including lighting). ^5 Reference - Case temperature 65°C 149°F with 200 mm × 200 mm × 10 mm 7.87" × 7.87" × 0.39" aluminum board and at ambient temperature of 40°C 104°F. ^6 ESD-Safe, IEC61340-5-1 compliant.

Keyence VS-S500CX Keyence

0.00 kr

Sold Out

Specifications

Model		VS-S500CX
Storage	Internal storage	7 GB
	microSD card (external)	Max. 64 GB ^*1
Image sensor	Frame rate	81 fps
Lens	Mount	Lens-integrated type
	Max. optical magnification	× 2.0
	Installation distance	50 mm to 500 mm 1.97" to 19.69" ^*2
	Field of view	27 mm to 417 mm 1.06" to 16.42"
I/O connection	Number of inputs	1 (insulated)
	Number of outputs	3 (insulated)
	Number of inputs/outputs	2 (insulated) (input and output switched via settings)
I/F	Ethernet	PoE IEEE 802.3at, M12 X cable × 1
	I/O	1 In/3 Out/2 In, Out M12 A cable × 1
	Lighting interface	Dedicated lighting connection interface × 1
	External media	microSD card slot × 1 (UHS-1)
Functions	Imaging mode	1.6 M 3.2 M 5 M
	Output image pixels	(5 M mode) 2544×1904 1904×2544 2224×2224 2976×1664 1664×2976 3824×1280 1280×3824
	Exposure time	0.033 msec to 1000 msec
	Image correction functions	Gain, Offset, Gamma correction, White balance, Fine HDR
	Indicators	OLED display, Status LED, Ethernet LED (LINK/ACT), SD card access indicator
	Buttons	Operation buttons × 3
	Installation support functions	Pointer (Class 1 laser product ^*3), Angle monitor
Power supply	Power voltage	24 V +25%/−20% or PoE (IEEE802.3at Power Class 4)
	Current consumption (camera only)	0.97 A, 18.7 W (for 19.2 V)/0.78 A, 18.7 W (for 24 V)
	Current consumption (including lighting)	4.7 A, 89.7 W (for 19.2 V)/3.8 A, 89.7 W (for 24 V)
	Current consumption (With CA-DEx10X connected)	11.3 A, 216.7 W (for 19.2 V)/9.1 A, 216.7 W (for 24 V) ^*4
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Relative humidity	85% RH or below (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC60068-2-64)
	Shock resistance	50 G, 3 times in each of the 6 directions (IEC60068-2-27)
Size (H×W×D)		122.3 mm × 52.6 mm × 69.2 mm 4.81" × 2.07" × 2.72"
Case temperature		0°C to 65°C 32 to 149°F ^*5
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Case: Aluminum die-casting, Front cover: Glass ^*6
Weight		Approx. 570 g 20.12 oz
^1 Using the configuration software, format the media before use. ^2 VS-LxxxMX/CX’s field-of-view measuring range is 150 mm to 3000 mm 5.91" to 118.11". VS-SxxxMX/CX’s field-of-view measuring range is 50 mm to 500 mm 1.97" to 19.69". ^3 FDA (CDRH) Part 1040.10 (The laser classification is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice), IEC60825-1. ^4 Maximum instantaneous current. Average current is below current consumption (including lighting). ^5 Reference - Case temperature 65°C 149°F with 200 mm × 200 mm × 10 mm 7.87" × 7.87" × 0.39" aluminum board and at ambient temperature of 40°C 104°F. ^6 ESD-Safe, IEC61340-5-1 compliant.

Keyence VS-S320MX Keyence

0.00 kr

Sold Out

Specifications

Model		VS-S320MX
Storage	Internal storage	7 GB
	microSD card (external)	Max. 64 GB ^*1
Image sensor	Frame rate	83 fps
Lens	Mount	Lens-integrated type
	Max. optical magnification	× 2.4
	Installation distance	50 mm to 500 mm 1.97" to 19.69" ^*2
	Field of view	22 mm to 417 mm 0.87" to 16.42"
I/O connection	Number of inputs	1 (insulated)
	Number of outputs	3 (insulated)
	Number of inputs/outputs	2 (insulated) (input and output switched via settings)
I/F	Ethernet	PoE IEEE 802.3at, M12 X cable × 1
	I/O	1 In/3 Out/2 In, Out M12 A cable × 1
	Lighting interface	Dedicated lighting connection interface × 1
	External media	microSD card slot × 1 (UHS-1)
Functions	Imaging mode	1.6 M 3.2 M
	Output image pixels	(3.2 M mode) 2048×1536 1536×2048 1776×1776 2368×1328 1328×2368 3072×1024 1024×3072
	Exposure time	0.028 msec to 1000 msec
	Image correction functions	Gain, Offset, Gamma correction, White balance, Fine HDR
	Indicators	OLED display, Status LED, Ethernet LED (LINK/ACT), SD card access indicator
	Buttons	Operation buttons × 3
	Installation support functions	Pointer (Class 1 laser product ^*3), Angle monitor
Power supply	Power voltage	24 V +25%/−20% or PoE (IEEE802.3at Power Class 4)
	Current consumption (camera only)	0.97 A, 18.7 W (for 19.2 V)/0.78 A, 18.7 W (for 24 V)
	Current consumption (including lighting)	4.7 A, 89.7 W (for 19.2 V)/3.8 A, 89.7 W (for 24 V)
	Current consumption (With CA-DEx10X connected)	11.3 A, 216.7 W (for 19.2 V)/9.1 A, 216.7 W (for 24 V) ^*4
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Relative humidity	85% RH or below (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC60068-2-64)
	Shock resistance	50 G, 3 times in each of the 6 directions (IEC60068-2-27)
Size (H×W×D)		122.3 mm × 52.6 mm × 69.2 mm 4.81" × 2.07" × 2.72"
Case temperature		0°C to 65°C 32 to 149°F ^*5
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Case: Aluminum die-casting, Front cover: Glass ^*6
Weight		Approx. 570 g 20.12 oz
^1 Using the configuration software, format the media before use. ^2 VS-LxxxMX/CX’s field-of-view measuring range is 150 mm to 3000 mm 5.91" to 118.11". VS-SxxxMX/CX’s field-of-view measuring range is 50 mm to 500 mm 1.97" to 19.69". ^3 FDA (CDRH) Part 1040.10 (The laser classification is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice), IEC60825-1. ^4 Maximum instantaneous current. Average current is below current consumption (including lighting). ^5 Reference - Case temperature 65°C 149°F with 200 mm × 200 mm × 10 mm 7.87" × 7.87" × 0.39" aluminum board and at ambient temperature of 40°C 104°F. ^6 ESD-Safe, IEC61340-5-1 compliant.

Keyence VS-S320CX Keyence

0.00 kr

Sold Out

Specifications

Model		VS-S320CX
Storage	Internal storage	7 GB
	microSD card (external)	Max. 64 GB ^*1
Image sensor	Frame rate	83 fps
Lens	Mount	Lens-integrated type
	Max. optical magnification	× 2.4
	Installation distance	50 mm to 500 mm 1.97" to 19.69" ^*2
	Field of view	22 mm to 417 mm 0.87" to 16.42"
I/O connection	Number of inputs	1 (insulated)
	Number of outputs	3 (insulated)
	Number of inputs/outputs	2 (insulated) (input and output switched via settings)
I/F	Ethernet	PoE IEEE 802.3at, M12 X cable × 1
	I/O	1 In/3 Out/2 In, Out M12 A cable × 1
	Lighting interface	Dedicated lighting connection interface × 1
	External media	microSD card slot × 1 (UHS-1)
Functions	Imaging mode	1.6 M 3.2 M
	Output image pixels	(3.2 M mode) 2048×1536 1536×2048 1776×1776 2368×1328 1328×2368 3072×1024 1024×3072
	Exposure time	0.028 msec to 1000 msec
	Image correction functions	Gain, Offset, Gamma correction, White balance, Fine HDR
	Indicators	OLED display, Status LED, Ethernet LED (LINK/ACT), SD card access indicator
	Buttons	Operation buttons × 3
	Installation support functions	Pointer (Class 1 laser product ^*3), Angle monitor
Power supply	Power voltage	24 V +25%/−20% or PoE (IEEE802.3at Power Class 4)
	Current consumption (camera only)	0.97 A, 18.7 W (for 19.2 V)/0.78 A, 18.7 W (for 24 V)
	Current consumption (including lighting)	4.7 A, 89.7 W (for 19.2 V)/3.8 A, 89.7 W (for 24 V)
	Current consumption (With CA-DEx10X connected)	11.3 A, 216.7 W (for 19.2 V)/9.1 A, 216.7 W (for 24 V) ^*4
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Relative humidity	85% RH or below (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC60068-2-64)
	Shock resistance	50 G, 3 times in each of the 6 directions (IEC60068-2-27)
Size (H×W×D)		122.3 mm × 52.6 mm × 69.2 mm 4.81" × 2.07" × 2.72"
Case temperature		0°C to 65°C 32 to 149°F ^*5
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Case: Aluminum die-casting, Front cover: Glass ^*6
Weight		Approx. 570 g 20.12 oz
^1 Using the configuration software, format the media before use. ^2 VS-LxxxMX/CX’s field-of-view measuring range is 150 mm to 3000 mm 5.91" to 118.11". VS-SxxxMX/CX’s field-of-view measuring range is 50 mm to 500 mm 1.97" to 19.69". ^3 FDA (CDRH) Part 1040.10 (The laser classification is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice), IEC60825-1. ^4 Maximum instantaneous current. Average current is below current consumption (including lighting). ^5 Reference - Case temperature 65°C 149°F with 200 mm × 200 mm × 10 mm 7.87" × 7.87" × 0.39" aluminum board and at ambient temperature of 40°C 104°F. ^6 ESD-Safe, IEC61340-5-1 compliant.

Keyence VS-S160MX Keyence

0.00 kr

Sold Out

Specifications

Model		VS-S160MX
Storage	Internal storage	3 GB
	microSD card (external)	Max. 64 GB ^*1
Image sensor	Frame rate	85 fps
Lens	Mount	Lens-integrated type
	Max. optical magnification	× 3.5
	Installation distance	50 mm to 500 mm 1.97" to 19.69" ^*2
	Field of view	16 mm to 417 mm 0.63" to 16.42"
I/O connection	Number of inputs	1 (insulated)
	Number of outputs	3 (insulated)
	Number of inputs/outputs	2 (insulated) (input and output switched via settings)
I/F	Ethernet	PoE IEEE 802.3at, M12 X cable × 1
	I/O	1 In/3 Out/2 In, Out M12 A cable × 1
	Lighting interface	Dedicated lighting connection interface × 1
	External media	microSD card slot × 1 (UHS-1)
Functions	Imaging mode	1.6 M
	Output image pixels	(1.6 M mode) 1440×1072 1072×1440 1248×1248 1664×928 928×1664 2160×720 720×2160
	Exposure time	0.021 msec to 1000 msec
	Image correction functions	Gain, Offset, Gamma correction, White balance, Fine HDR
	Indicators	OLED display, Status LED, Ethernet LED (LINK/ACT), SD card access indicator
	Buttons	Operation buttons × 3
	Installation support functions	Pointer (Class 1 laser product ^*3), Angle monitor
Power supply	Power voltage	24 V +25%/−20% or PoE (IEEE802.3at Power Class 4)
	Current consumption (camera only)	0.97 A, 18.7 W (for 19.2 V)/0.78 A, 18.7 W (for 24 V)
	Current consumption (including lighting)	4.7 A, 89.7 W (for 19.2 V)/3.8 A, 89.7 W (for 24 V)
	Current consumption (With CA-DEx10X connected)	11.3 A, 216.7 W (for 19.2 V)/9.1 A, 216.7 W (for 24 V) ^*4
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Relative humidity	85% RH or below (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC60068-2-64)
	Shock resistance	50 G, 3 times in each of the 6 directions (IEC60068-2-27)
Size (H×W×D)		122.3 mm × 52.6 mm × 69.2 mm 4.81" × 2.07" × 2.72"
Case temperature		0°C to 65°C 32 to 149°F ^*5
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Case: Aluminum die-casting, Front cover: Glass ^*6
Weight		Approx. 570 g 20.12 oz
^1 Using the configuration software, format the media before use. ^2 VS-LxxxMX/CX’s field-of-view measuring range is 150 mm to 3000 mm 5.91" to 118.11". VS-SxxxMX/CX’s field-of-view measuring range is 50 mm to 500 mm 1.97" to 19.69". ^3 FDA (CDRH) Part 1040.10 (The laser classification is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice), IEC60825-1. ^4 Maximum instantaneous current. Average current is below current consumption (including lighting). ^5 Reference - Case temperature 65°C 149°F with 200 mm × 200 mm × 10 mm 7.87" × 7.87" × 0.39" aluminum board and at ambient temperature of 40°C 104°F. ^6 ESD-Safe, IEC61340-5-1 compliant.

Previous Page 37 / 38Next