Static Control

Showing 73 - 96 of 214 products

Keyence OP-88414 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88413 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88412 Keyence

€407,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88411 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88020 Keyence

€210,95

Only 9 units left

Specifications

Model				OP-88020^*1
Length				3 m 9.8 '
Rated input				100 to 240 VAC, 50/60 Hz
Rated output				12 VDC, 1.5 A max.
Dimensions				104 × 43 × 31 mm 4.09" × 1.69" × 1.22" (excl. cable area)
Weight				Approx. 125 g
^*1 A separate power supply cord is required. For details, contact your nearest KEYENCE sales office.

Keyence OP-88410 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-L005MT Keyence

€1.998,95

Only 4 units left

Specifications

Model		SJ-L005MT
Type		Tube type
Voltage application method		High frequency AC method (68 kHz)
Applied voltage		2.5 kVAC
Ion balance		±10 V^*1
Static elimination time		See Data Sheet.
Air supply pressure		0.05 to 0.5 MPa
Air supply temperature		0 to +50°C 32 to 122°F
Connection tube		Outer diameter: ø6 0.24", inner diameter: ø4 0.16"
Ozone concentration		0.05 ppm or less^*2
Control input	Static elimination stop input	Switchable between non-voltage input and voltage input Non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit) Voltage input: Maximum input rating 30 V, ON voltage 7 V or higher, OFF current 0.1 mA or lower, ON current 1.5 mA or lower (at 30 V)^*3
	Reset input
	LPC mode input
Control output	Alarm (N.C.)/Ion level alarm (N.O.)	Open-collector output 30 VDC or less 50 mA max., residual voltage 1.5 V or less NPN/PNP settings switchable^3^4
Ratings	Power voltage	24 VDC ±10% (including ripple) or 12 VDC (dedicated AC adapter OP-88020/87722^*5)
	Current consumption	0.2 A or less (24 VDC) 0.3 A or less (12 VDC)
Environmental resistance	Ambient temperature	0 to +50°C 32 to 122°F (0 to +40°C 32 to 104°F when OP-87722 is used)
	Relative humidity	35 to 65% RH (no condensation)
	Overvoltage category	I
	Pollution degree	2
Material		Main unit case: PBT / Charge indicator: TPU / Securing bracket: SUS303, PBT Cable: PVC, TPE, copper alloy Connector: PBT, brass + gold plating, phosphor bronze + gold plating, coper alloy + gold plating Fitting: Brass + electroless Ni plating, POM, NBR
Weight		Approx. 65 g
^1 Measurement results taken with tube length of 500 mm 19.69", an installation distance of 50 mm 1.97", and air supply pressure of 0.2 MPa (typical values) ^2 Measurement results taken with tube length of 500 mm 19.69", an installation distance of 300 mm 11.81", and air supply pressure of 0.1 MPa (typical values) ^3 Cannot be used when the power supply is the AC adapter. ^4 To use the ion level alarm with the tube type, use it with air supply pressure of 0.3 MPa or less. ^*5 Rated input of 100 to 240 VAC, 50/60 Hz

Keyence SJ-L005M Keyence

€1.034,95

Only 5 units left

Specifications

Model		SJ-L005M
Type		Nozzle type
Voltage application method		High frequency AC method
Applied voltage		2.2 kVAC
Ion balance		±10 V^*1
Static elimination time		0.4 sec.^*1
Air supply pressure		0.05 to 0.5 MPa
Air supply temperature		0 to +50°C 32 to 122°F
Connection tube		Outer diameter: ø6 0.24", inner diameter: ø4 0.16"
Ozone concentration		0.05 ppm or less^*2
Control input	Static elimination stop input	Switchable between non-voltage input and voltage input Non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit) Voltage input: Maximum input rating 30 V, ON voltage 7 V or higher, OFF current 0.1 mA or lower, ON current 1.5 mA or lower (at 30 V)^*3
	Reset input
	LPC mode input
Control output	Alarm (N.C.)/Ion level alarm (N.O.)	Open-collector output 30 VDC or less 50 mA max., residual voltage 1.5 V or less NPN/PNP settings switchable^3^4
Ratings	Power voltage	24 VDC ±10% (including ripple) or 12 VDC (dedicated AC adapter OP-88020/87722^*5)
	Current consumption	0.2 A or less (24 VDC) 0.3 A or less (12 VDC)
Environmental resistance	Ambient temperature	0 to +50°C 32 to 122°F (0 to +40°C 32 to 104°F when OP-87722 is used)
	Relative humidity	35 to 65% RH (no condensation)
	Overvoltage category	I
	Pollution degree	2
Material		Main unit case: PBT / Charge indicator: TPU / Securing bracket: SUS303, PBT Cable: PVC, TPE, copper alloy Connector: PBT, brass + gold plating, phosphor bronze + gold plating, coper alloy + gold plating Fitting: Brass + electroless Ni plating, POM, NBR
Weight		Approx. 60 g
^1 Measurement results taken with an installation distance of 150 mm 5.91", air supply pressure of 0.2 MPa, and a nozzle angle of 90° (typical values) ^2 Measurement results taken with an installation distance of 100 mm 3.94", air supply pressure of 0.1 MPa, and a nozzle angle of 90° (typical values) ^3 Cannot be used when the power supply is the AC adapter. ^4 To use the ion level alarm with the tube type, use it with air supply pressure of 0.3 MPa or less. ^*5 Rated input of 100 to 240 VAC, 50/60 Hz

Keyence SJ-HW02 Keyence

€0,00

Sold Out

Specifications

Model				SJ-HW02
Type				Extension unit for wide angle booster Used to extend the auxiliary air diffusion unit.

Keyence SJ-HW01 Keyence

€0,00

Sold Out

Specifications

Model				SJ-HW01
Type				Wide angle booster starter unit Used to widen the static elimination range.

Keyence SJ-HS02 Keyence

€0,00

Sold Out

Specifications

Model				SJ-HS02
Type				Extension unit for straight air booster

Keyence SJ-HS01 Keyence

€0,00

Sold Out

Specifications

Model				SJ-HS01
Type				Straight air booster starter unit

Keyence SJ-HM01 Keyence

€0,00

Sold Out

Specifications

Model				SJ-HM01
Overview				Used over areas where auxiliary air should not be used.

Keyence SJ-H02 Keyence

€0,00

Sold Out

Specifications

Model		SJ-H02
Power supply		4 AA batteries
Power supply	Operating time	12 hours (Continuous operation)/1 year (Standby)
Operation range		Within 4m in front Within 2.5 m at angle of 45 degrees in the horizontal direction from the bar front Within 2.5 m at angle of 30 degrees in the vertical direction from the bar front
Environmental resistance	Ambient temperature	0°C to +40°C
	Relative humidity	35 to 85%RH (No condensation)

Keyence OP-84454 Keyence

€0,00

Sold Out

Specifications

Model				OP-84454
Overview				Used to perform maintenance on the inside wall of the electrode probe cap.

Keyence OP-84386 Keyence

€0,00

Sold Out

Specifications

Model				OP-84386
Type				End unit for air booster

Keyence OP-84385 Keyence

€0,00

Sold Out

Specifications

Model				OP-84385
Type				Auxiliary support for air booster

Keyence OP-84363 Keyence

€0,00

Sold Out

Specifications

Model				OP-84363
Type				Electrode probe replacement kit

Keyence OP-84301 Keyence

€0,00

Sold Out

Specifications

Model				OP-84301
Type				End unit
Note				Used for installing the SJ-H* Series.

Keyence OP-84300 Keyence

€0,00

Sold Out

Specifications

Model				OP-84300
Type				Auxiliary support
Note				Used to for installing SJ-H* Series.

Keyence OP-84299 Keyence

€0,00

Sold Out

Specifications

Model				OP-84299
Type				Electrode probe cleaning kit for SJ-H* Series
Note				Used for maintaining the electrode probes on the SJ-H* Series. * This cannot be used when the laminar flow assisting part is a attached.