Variable Speed Drive - 75kW- 400V - 3 Phases - Altivar ATV340 Ethernet
Variable Speed Drive Altivar ATV212 - 75kW - 100hp - 480V - 3ph - EMC - IP21
Soft Starter - ATS22-control 220V - Power 230V(132kW)/400...440V(250kW)
Soft Starter for Asynchronous Motor - ATS01 - 12 A - 380..415V - 5.5kW
SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; double action; polycarbonate enclosure Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT Without limit monitor. Without option module. . Brief instructions English / German / Chinese. Standard / Fail-Safe - Depressurizing the actuator in case of failure of electrical auxiliary power (single acting only). Without Manometer block / Venting gauge block / Booster.
PLC, 24 VDC supply, 18 x 24 VDC inputs, 12 x PNP outputs 0.3 A, 2 x analog inputs, 10K steps program + 32K words data memory, 1 x Ethernet port
1 x Load Cell input -5.0 to 5.0 mV/V 24 bit 125 �s screwless push-in connector 12 mm wide
motion servo drive - Lexium 23 - single phase 200...255 V - 100 W - I/O
ACS880-01-293A-3 PN: 160KW, IN: 293A; The ACS880-01 drives are customized to meet the particular needs of specific industries, such as oil and gas, mining, metals, chemicals, cement, power plants, material handling, pulp and paper, sawmills, marine, water and wastewater, food and beverage, and automotive. They can control a wide range of applications, including cranes, extruders, winches, winders, conveyors, mixers, compressors, centrifuges, test benches, elevators, extruders, pumps, and fans. The ACS880-01 comes in one compact package for easy installation and commissioning. The drive can be installed on the wall as standard and in a cabinet as an option. The drive offering includes enclosure classes up to IP55, making it suitable for most environments and installations. ACS880-01 drives have all the essential features built-in. These features include as standard a choke for harmonic filtering as well as options like a brake chopper, EMC filter and communication protocol adapter, functional safety, external output filters, and I/O extension modules.
Soft-starter with built-in bypass - ABB (PSTX series) - Rated input voltage 208Vac-690Vac - Rated current 300A (nom.; inside-delta) - Rated power 160kW (nom.; 400Vac; inside-delta) / 200HP (nom.; 440/480Vac; inside-delta) - Control voltage 24Vdc - IP00 - with RS-485 communication capability - Surface / wall mounting - compatible with input voltages 208Vac-690Vac (220Vac / 230Vac / 240Vac / 380Vac / 400Vac / 415Vac / 440Vac / 480Vac / 500Vac / 525Vac / 600Vac / 660Vac) - item code #PSTX170-690-70
Soft-starter with built-in bypass - ABB (PSTX series) - Rated input voltage 208Vac-690Vac - Rated current 245A (nom.; inside-delta) - Rated power 132kW (nom.; 400Vac; inside-delta) / 150HP (nom.; 440/480Vac; inside-delta) - Control voltage 24Vdc - IP00 - with RS-485 communication capability - Surface / wall mounting - compatible with input voltages 208Vac-690Vac (220Vac / 230Vac / 240Vac / 380Vac / 400Vac / 415Vac / 440Vac / 480Vac / 500Vac / 525Vac / 600Vac / 660Vac) - item code #PSTX142-690-70
Soft-starter with built-in bypass - ABB (PSTX series) - Rated input voltage 208Vac-600Vac - Rated current 640A (nom.; inside-delta) - Rated power 355kW (nom.; 400Vac; inside-delta) / 500HP (nom.; 440/480Vac; inside-delta) - Control voltage 24Vdc - IP00...
The softstarter PSE250-600-70-1 has a rated maximum operational current of 250 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur
Soft-starter with built-in bypass - ABB (PSE series) - Rated input voltage 208Vac-600Vac - Rated current 60A (nom.; in-line) - Rated power 30kW (nom.; 400Vac; in-line) / 40HP (nom.; 440/480Vac; in-line) - Control voltage 24Vdc - IP00 - Surface / wall mounting - compatible with input voltages 208Vac-600Vac (220Vac / 230Vac / 240Vac / 380Vac / 400Vac / 415Vac / 440Vac / 480Vac / 500Vac / 525Vac) - item code #PSE60-600-70